Good evening
A question about:
How to Install DVB Sky Internal Card DVB-T2 Tuner on Linux Receiver "Vu+ dou2".
And how to run its own plug-in at Black Hole
And how to search for digital terrestrial channels
Attached Image of the Tuner
Thank You
There are 21 replies in this Thread which was already clicked 2,190 times. The last Post () by Muhammad M.
Good evening
A question about:
How to Install DVB Sky Internal Card DVB-T2 Tuner on Linux Receiver "Vu+ dou2".
And how to run its own plug-in at Black Hole
And how to search for digital terrestrial channels
Attached Image of the Tuner
Thank You
i am a little confused...
this tuner looks like a vu+ tuner (probably dvbt-2 as you said).
if your receiver is vu+ duo, you can't install it.
if your receiver is duo2 there is the place to install it.
than in the next reboot,it will appear in the tuners menu,you can switch it to "on" and set it in your area.
you can scan channels from "channels search" menu,just change/select this tuner.
Yes the receiver "Vu + dou2" has been installed and appears in the list of tuners, but ... there are add-ons that must be added until it works, Note: The receiver works at Black Hole
1. The picture attached from a friend to a screen I do not see in my receiver, which he does not know either. It is a "Signal Finder" screen ... It is like a satellite search searcher, which is important for adjusting the signal before searching. .
2. I also found a YouTube video that says "Download Plugins" must be in the video ... Sorry I do not know if this is allowed in the forum or not.
3 - Also how to write frequencies for research.
the "how to" in the video,is for external usb tuner (and the type of the driver he is using...)
your tuner is pci and not usb...
you do not need any plugin. this tuner is from vu+ ,for vu+ and everything you need,is preinstalled in receiver/drivers.the signal finder is something like "help" for signal,if you know that your antenna works,you do not need it.
if the tuner appears in tuners menu (the second picture) press "ok" in it and turn it to "on" and set the parameters (dvbt or dvbc) and your area...
than go to "channel search" and change tuner (left/right arrow) to dvb-t. than you can do a full scan or insert frequency if you know them...
Well .. So the problem is determined in one direction instead of several directions ... I will go in the direction of the signal and see what the outcome will be
Thank you so much..
your terestrial antenna is working?
Tonight I will change its place to a better place, especially since the current place is surrounded by concrete buildings
I will also make sure that type is "dvb-t2" and not "dvb-t" until he picks up the signal.
mine isn't vu+,but it is similar (internal dvbt tuner)
first step
menu/setup/service searching/tuner configuration
than
menu/setup/service searching/manual scan and turn the tuner to dvbt
select the type of scan and go...
Tonight I will change its place to a better place, especially since the current place is surrounded by concrete buildings
I will also make sure that type is "dvb-t2" and not "dvb-t" until he picks up the signal.
ah, ok ,so you are not sure about your antenna, so maybe the signal finder plugin,could be a little helpfull...
In the last picture you set ...
In front of Channel 21 ...
While I have come in a different way, they have a number of six numbers such as: 574000
I think there's no big difference ... The two screens are different for different picture, I have Black Hole photo ... What picture do you use in the receiver?
Tonight I will change its place to a better place, especially since the current place is surrounded by concrete buildings
I will also make sure that type is "dvb-t2" and not "dvb-t" until he picks up the signal.
ah, ok ,so you are not sure about your antenna, so maybe the signal finder plugin,could be a little helpfull...
Yes ... for this you searched for "Signal Finder" screen to make it easier and access quickly
Display MoreIn the last picture you set ...
In front of Channel 21 ...
While I have come in a different way, they have a number of six numbers such as: 574000
I think there's no big difference ... The two screens are different for different picture, I have Black Hole photo ... What picture do you use in the receiver?
i am using satdreamgr image...
looks like mine image can use the signal as "channel",
maybe blackhole can handle it only as frequency.
or it should be something by "area settings".
Exactly ... Can I write frequencies in your own way? ... because we have in Egypt you write in your own way ... 21, 22, and so on
every channel corresponds to a frequency...
for example
channel 21 = frequency 474.000
channel 24 = frequency 498.000
and so on.
go in the "frequency" tab and press left/right arrow, if it changes to "channel". if it is not,maybe your image does not support it...
In Egypt, these frequencies work ... What is the equivalent to write in the receiver?
channel 22 = frequency?
channel 23 = frequency?
channel 25 = frequency?
channel 26 = frequency?
channel 27 = frequency?
channel 29 = frequency?
channel 32 = frequency?
channel 33 = frequency?
channel 34 = frequency?
channel 35 = frequency?
channel 36 = frequency?
channel 39 = frequency?
channel 40 = frequency?
channel 41 = frequency?
channel 42 = frequency?
go in the "frequency" tab and press left/right arrow, if it changes to "channel". if it is not,maybe your image does not support it...
Is this a problem in receiving channels?
go in the "frequency" tab and press left/right arrow, if it changes to "channel". if it is not,maybe your image does not support it...
Is this a problem in receiving channels?
no it is not problem,and instead of scan transporder to transporder, you can do a full scan,and it will find all the available channels...
The truth is that I made you tired ... but I learned a lot and came very close ...thank you very mach
chan frequency
21 474.000
22 482
23 490
24 498
25 506
26 514
27 522
28 530
29 538
30 546
31 554
32 562
33 570
34 578
35 586
36 594
37 602
38 610
39 618
40 626
41 634
42 642
43 650
44 658
45 666
46 674
47 682
48 690
49 698
50 706
and for every +1 channel = +8 mhz in the freq
Don’t have an account yet? Register yourself now and be a part of our community!