ABM not locking for Sky 28.2

Hi Guys,

dont know if i can post this on the same thread but im gettin same error now on sky tuner A. i have updated to the lates abm 3.0 and updated conf file but keep gettin the turner error on sky DVB S using my vu+zero 4k on lates openvix.

Quote from abu baniaz

That frequency is what Sky receivers use. It is going to be an alignment/cabling/hardware issue provided you have configured tuners correctly.

this is how my turner conf look like:

conf mode -- simple

mode -- Tonebusrt A/B

PORT A -- 28.2e astra 2e/2f/2g

port B -- nothing connected

force legacy signal stats -- NO

the rest i dont think coul be any issue unless the atena has moved.

thank again for all help..

if this can help on LONDON HD it does not work, if i use BRIGHTON hd it does work but most channels are working with poor reception.

i live in SE LONDON (CRYSTAL PALACE)

Quote from abu baniaz

ABM for Sky 28.2 uses the frequency for tuning. It does not matter which region you use.

Your tuner config should be:

Simple

Single

28.2

I don't know why you are using Toneburst

Display More

i have chenged to simple / single but still getttin the error :(

Quote from abu baniaz

Forget ABM. Go to signal finder and see if you can lock onto the frequency. Change the values to exactly what is pictured. If you can't get a signal lock, you need to re-align your dish.

thank you very much for all your help again ABU it works now, i think it was more an interference on the cable to the box that a reception problem. any way i think i learned something new today as well.