stalker portal on enigma2

There are 473 replies in this Thread which was already clicked 174,780 times. The last Post () by biko.

    I cannot remember which vu+ you said you have, but I recommend downloading openblack hole for it.

    Setting up multi boot. Then you can experiment with all the different builds.

    It's dead simple to do.

    On my vu+ zero 4k, I have openbh. openatv, openvix and pure2 installed on it.

    I switch between them all for testing purposes.


    Openatv is perfectly fine nowadays on VUs


    https://www.enigma2.net/image-openbh-4-3-for-vuplus/

    ** A person who feels appreciated will always do more than what is expected **

    Like 1

    Drivers are down to Vu/Marusys and there is no consensus on their "quality", that much is certain... If anything, developers are not writing about them in superlatives...

    "Enlightenment is man's emergence from his self-incurred immaturity. Immaturity is the inability to use one's own understanding without the guidance of another. This immaturity is self-incurred if its cause is not lack of understanding, but lack of resolution and courage to use it without the guidance of another. The motto of enlightenment is therefore: Sapere aude! Have courage to use your own understanding!"


    http://www.columbia.edu/acis/ets/CCREAD/etscc/kant.html

    I'm no master in these matters, m8... I dab in it, here and there... ;)


    Sadly, I do not have your box, so I don't really know...


    In principle, Broadcom or Arm processor - yes...


    As I said earlier:


    "In Plugins > Stalker Setup > Use Stalker MAC > "Yes" = one can over-ride STB's MAC. "No" would mean using your STBs MAC.


    In H7 > Plugins > Stalker Setup > one can activate Ministra protocol and have it all the easy way....


    Mind you, not that I recommend it... But if you do use all that - USE VPN services!!! On the other hand, if you bought those services you have left the digital financial trail and... good luck with that..."

    On HDSC forum (our home) Delfi says re. PurE2 for DB520/525::


    "Dmm 520/525 Dmm 820 Dmm7080

    Probably one of the rare images that work with 1080p - full HD skin, at this moment.


    Pure2 6.2 DMM download


    Video


    Screenshoots


    31.1.2018
    - new DMM drivers
    - E2 code
    - plugins in feeds
    - pManager


    2.2.2018
    - more updates for E2 and skin


    23.2.2018
    - drivers
    - e2 code
    - gstreamer
    - ffmpeg
    - plugins
    - misc"


    If 520 image works for your 525 box, then fully supported PurE2 is 6.3 here: http://www.pur-e2.club/OU/images/index.php?dir=6.3/dreambox/


    Tell us how it went...

    "Enlightenment is man's emergence from his self-incurred immaturity. Immaturity is the inability to use one's own understanding without the guidance of another. This immaturity is self-incurred if its cause is not lack of understanding, but lack of resolution and courage to use it without the guidance of another. The motto of enlightenment is therefore: Sapere aude! Have courage to use your own understanding!"


    http://www.columbia.edu/acis/ets/CCREAD/etscc/kant.html

    Quote from tony34567

    Thanks gorski, i flashed openatv 6.3 nightly build image for James Donkey HD DUO box ,

    I am unaware that purE2 images available for said stb.

    I have it now and we do make a PurE2 image for it:


    http://www.pur-e2.club/OU/imag….php?dir=6.3/jamesdonkey/

    "Enlightenment is man's emergence from his self-incurred immaturity. Immaturity is the inability to use one's own understanding without the guidance of another. This immaturity is self-incurred if its cause is not lack of understanding, but lack of resolution and courage to use it without the guidance of another. The motto of enlightenment is therefore: Sapere aude! Have courage to use your own understanding!"


    http://www.columbia.edu/acis/ets/CCREAD/etscc/kant.html

    Like 1

    dear master;


    this problem have...


    I opened the plugin in message 2 and installed it manually



    I am NO "master", m8!!!


    When I connect JD again I will check...


    Did you install it from Plugins or manually?

    "Enlightenment is man's emergence from his self-incurred immaturity. Immaturity is the inability to use one's own understanding without the guidance of another. This immaturity is self-incurred if its cause is not lack of understanding, but lack of resolution and courage to use it without the guidance of another. The motto of enlightenment is therefore: Sapere aude! Have courage to use your own understanding!"


    http://www.columbia.edu/acis/ets/CCREAD/etscc/kant.html

    Like 1

    OK, which one exactly did you install?


    The compatible one is in PurE2 feeds: MENU > Plugins > green button > Extensions > Stalker-qt... Installs fine. I have no idea if it works generally speaking, I started it and it didn't reboot E2 - however since I do not have those services I can't say more... So, you tell me...


    OpenWebIF freezes the box solid.


    FNC PurE2 plugins:


    OLM works,

    Iwaatch probably works,

    YIFY can not install,

    Streamlord works.


    Very limited box (RAM and ROM). You better mount a fast USB stick, have a large SWAP file using Swap Manager 2 from System plugins and do not overload it... It freezes after a while, hence read my tutorial re. expansion of ROM and RAM...

    "Enlightenment is man's emergence from his self-incurred immaturity. Immaturity is the inability to use one's own understanding without the guidance of another. This immaturity is self-incurred if its cause is not lack of understanding, but lack of resolution and courage to use it without the guidance of another. The motto of enlightenment is therefore: Sapere aude! Have courage to use your own understanding!"


    http://www.columbia.edu/acis/ets/CCREAD/etscc/kant.html

    Like 2

    dear master;

    barry allen version 12.80

    I have no memory problem.


    also additions to the PURE2 image

    no stalker

    open the manual given in the 2nd message on this subject

    I uploaded and I encountered the error in the picture

    previously in the original raw image in the 14th message

    I ran it with the plugin but I updated the software

    I don't remember how

    Thank you..

    BA in JD? Wow! Good luck with that... Btw, BA is mentioned in my thread on expanding ROM and RAM but OK...


    Streaming is freezing the box due to a very small amount of RAM but you're not listening...


    YES, the correct version of Stalker IS present in PurE2 feeds and it installs well. But why would you listen to me...


    If your version of Staker isn't working then you should have told me which one you installed, as I asked you - but you did not answer, so...


    Keep doing whatever you're doing - I'm outta here...

    "Enlightenment is man's emergence from his self-incurred immaturity. Immaturity is the inability to use one's own understanding without the guidance of another. This immaturity is self-incurred if its cause is not lack of understanding, but lack of resolution and courage to use it without the guidance of another. The motto of enlightenment is therefore: Sapere aude! Have courage to use your own understanding!"


    http://www.columbia.edu/acis/ets/CCREAD/etscc/kant.html

    Like 3

    dear master;

    because you take the time to help me

    thank you very much, but the problem is what you wrote

    I may be missing or misunderstood, excuse me.

    telnet command to the last screen error

    unfortunately we would go edit the mac in the menu

    PURE2 image's network settings

    it is possible to edit mac hardware

    or is there any software risk?

    Thank you


    note: I added the plugin you asked below

    Jesus...


    For the umpteenth time: I installed Stalker from JD PurE2 feed (they are not the same for all boxes, the bin files differ!) and it installed well! Now, if you are going to invent hot water - be my guest but then leave me out of it...


    Why is there a problem in changing MAC address in Network settings? Write down the original one, just in case you wanna go back to it, then change it the way you want - what's the problem? What are you playing at here? Errors you mention have nothing to do with that! But if you are cloning a MAC address and your provider found it out - it has nothing to do with our SW...


    If you are going to be stubborn and NOT listen to advice given after you ask for advice - then please, don't write here again with your problems and waste my time, energy and good will...

    "Enlightenment is man's emergence from his self-incurred immaturity. Immaturity is the inability to use one's own understanding without the guidance of another. This immaturity is self-incurred if its cause is not lack of understanding, but lack of resolution and courage to use it without the guidance of another. The motto of enlightenment is therefore: Sapere aude! Have courage to use your own understanding!"


    http://www.columbia.edu/acis/ets/CCREAD/etscc/kant.html

    Like 1
    • Official Post

    Guys i think things are getting lost in translation, good will and all that.....


    atlas35 Please answer some basic questions:


    Are you using the the pure2 version of the stalker plugin, downloaded with your remote control from the plugin feed ? YES / NO ??


    Quote from atlas35

    unfortunately we would go edit the mac in the menu

    PURE2 image's network settings

    it is possible to edit mac hardware

    or is there any software risk?

    Backup your current image and your current mac address, then try and change it and see if it works or not

    He isn't, Jens. He took it from another box, inventing hot water, forcing the issue needlessly, even though I already told him that compatible version is in JD feed, in PurE2 Plugins, to DL and install. He says there are none there, which is false.


    And so on... How many times does one need to tell him that I installed it from JD feed and that it does install and it starts fine, no errors during installation...???

    "Enlightenment is man's emergence from his self-incurred immaturity. Immaturity is the inability to use one's own understanding without the guidance of another. This immaturity is self-incurred if its cause is not lack of understanding, but lack of resolution and courage to use it without the guidance of another. The motto of enlightenment is therefore: Sapere aude! Have courage to use your own understanding!"


    http://www.columbia.edu/acis/ets/CCREAD/etscc/kant.html

    Like 2

Your hub for IPTV & streaming support.

Get help with Android apps, Smart TV setup, m3u playlists, channel lists, and finding reliable live streaming websites. Master IPTV streaming on all devices. Find downloads, setup tutorials, and community support for apps, Smart TVs, and m3u channel lists.