stalker portal on enigma2

barracud - on which image on Mio4k are You running this plugin ?

openpli 8.0

OK, expect ipk file from post nr.270 , is there something else what it should be installed , or configured , to make it working

Try anyone for your stb

https://github.com/oe-alliance/e2plugins

http://178.63.156.75/paneladdons/Pluginsoe20/stalkerportal/

https://gofile.io/d/iK3VKs

or TURKvod

How can I edit the mac stalker? Thank you

Quote from khayr

How can I edit the mac stalker? Thank you

in network adaptor selection settings

Quote from urie

Quote from khayr

How can I edit the mac stalker? Thank you

in network adaptor selection settings

Thanks for the reply but I would like to edit the mac stalker and not my mac address from network settings.

Quote from khayr

Quote from urie

Quote from khayr

How can I edit the mac stalker? Thank you

in network adaptor selection settings

Thanks for the reply but I would like to edit the mac stalker and not my mac address from network settings.

If I remember correctly I think KiddaC did a script to add other mac addresses you will need to search on forum.

some info here

plugin.py

Copy to /usr/lib/enigma2/python/Plugins/Extensions/Stalker/ and restart E2

Quote from thundere

plugin.py

Copy to /usr/lib/enigma2/python/Plugins/Extensions/Stalker/ and restart E2

Thanks for the advice but the problem persists

Quote from khayr

Quote from thundere

plugin.py

Copy to /usr/lib/enigma2/python/Plugins/Extensions/Stalker/ and restart E2

Thanks for the advice but the problem persists

did you read the full post?

Quote from KiddaC

** For OE-Alliance builds only **

Find attached an amended plugin.py file that will allow you to define the individual MAC addresses to be used in your portal URLs.

This enables you to easily change the mac address to anything you want, rather than just being your boxes set hardware MAC address.

Please note this is based on the oe-alliance version of qtstalker-v5 as can be found here.

https://github.com/oe-alliance/e2plugins

How to use my amend

Install the stalker qt IPK as normal (i.e. from oe-alliance plugin extensions feeds)

Navigate to

/usr/lib/enigma2/python/Plugins/Extensions/Stalker/

Backup the original plugin.py (you have been warned)

Copy attached plugin.py over to this folder.

reboot GUI

My testing has been done with a config file. So create a new file on your external media device called portal.stalkerconfig

/media/hdd

or

/media/usb

edit this file by putting your URL addresses in it in the following format.

The new bit is the  ?mac=

Code

1. portal 0 http://domain1.xyz:7777/c/?mac=00:1A:79:00:BB:7C
2. portal 1 http://domain2.xyz:8080/c/?mac=00:1A:79:00:00:A7

save/upload config file back to your media device

Go into stalker setup.

Menu > Plugins > stalker setup

If you have used a config file, the blue button should now say "load settings" and display your current MAC address

(this will still work with manual entry, config file is quicker and easier though)

Press blue button to load your new config file. Click save.

Select the Portal you wish to use by pressing OK on it.

If the MAC address in the config file is different than the current MAC address, the MAC address of your box will be changed.

You can then go into Stalker (main menu or in extensions) and play this portal.

Enjoy

Quote from KiddaC

** For OE-Alliance builds only **

Find attached an amended plugin.py file that will allow you to define the individual MAC addresses to be used in your portal URLs.

This enables you to easily change the mac address to anything you want, rather than just being your boxes set hardware MAC address.

Please note this is based on the oe-alliance version of qtstalker-v5 as can be found here.

https://github.com/oe-alliance/e2plugins

How to use my amend

Install the stalker qt IPK as normal (i.e. from oe-alliance plugin extensions feeds)

Navigate to
/usr/lib/enigma2/python/Plugins/Extensions/Stalker/

Backup the original plugin.py (you have been warned)
Copy attached plugin.py over to this folder.

reboot GUI

My testing has been done with a config file. So create a new file on your external media device called portal.stalkerconfig

/media/hdd

or

/media/usb

edit this file by putting your URL addresses in it in the following format.

The new bit is the  ?mac=

Code

portal 0 http://domain1.xyz:7777/c/?mac=00:1A:79:00:BB:7C
portal 1 http://domain2.xyz:8080/c/?mac=00:1A:79:00:00:A7

save/upload config file back to your media device

Go into stalker setup.

Menu > Plugins > stalker setup

If you have used a config file, the blue button should now say "load settings" and display your current MAC address
(this will still work with manual entry, config file is quicker and easier though)

Press blue button to load your new config file. Click save.

Select the Portal you wish to use by pressing OK on it.

If the MAC address in the config file is different than the current MAC address, the MAC address of your box will be changed.

You can then go into Stalker (main menu or in extensions) and play this portal.

Enjoy

:cool1: :thumbup:

Display More

This plugin.py is not working properly, there is a bug in it somewhere.
When it is replaced instead of the original, it changes the mac but after that the spinner and stalker start is not working.

When the original is returned, then there is no automatic transfer of the mac address, but then at least it works according to the procedure of manually changing the mac.

Otherwise the image is open vix 6.4 and zgemma h7s, and the stalker version is from addons.

Quote from commando

Quote from KiddaC

** For OE-Alliance builds only **

Find attached an amended plugin.py file that will allow you to define the individual MAC addresses to be used in your portal URLs.

This enables you to easily change the mac address to anything you want, rather than just being your boxes set hardware MAC address.

Please note this is based on the oe-alliance version of qtstalker-v5 as can be found here.

https://github.com/oe-alliance/e2plugins

How to use my amend

Install the stalker qt IPK as normal (i.e. from oe-alliance plugin extensions feeds)

Navigate to
/usr/lib/enigma2/python/Plugins/Extensions/Stalker/

Backup the original plugin.py (you have been warned)
Copy attached plugin.py over to this folder.

reboot GUI

My testing has been done with a config file. So create a new file on your external media device called portal.stalkerconfig

/media/hdd

or

/media/usb

edit this file by putting your URL addresses in it in the following format.

The new bit is the  ?mac=

Code

portal 0 http://domain1.xyz:7777/c/?mac=00:1A:79:00:BB:7C
portal 1 http://domain2.xyz:8080/c/?mac=00:1A:79:00:00:A7

save/upload config file back to your media device

Go into stalker setup.

Menu > Plugins > stalker setup

If you have used a config file, the blue button should now say "load settings" and display your current MAC address
(this will still work with manual entry, config file is quicker and easier though)

Press blue button to load your new config file. Click save.

Select the Portal you wish to use by pressing OK on it.

If the MAC address in the config file is different than the current MAC address, the MAC address of your box will be changed.

You can then go into Stalker (main menu or in extensions) and play this portal.

Enjoy

:cool1: :thumbup:

Display More

This plugin.py is not working properly, there is a bug in it somewhere.
When it is replaced instead of the original, it changes the mac but after that the spinner and stalker start is not working.

When the original is returned, then there is no automatic transfer of the mac address, but then at least it works according to the procedure of manually changing the mac.

Otherwise the image is open vix 6.4 and zgemma h7s, and the stalker version is from addons.

Display More

https://www.linuxsat-support.c…achment/167281-plugin-py/

That one working properly with Zgemma H7

Quote from thundere

Quote

https://www.linuxsat-support.c…achment/167281-plugin-py/

That one working properly with Zgemma H7

Thank you, it works perfectly !!!

Quote from khayr

Quote from thundere

[attach = '167281'] [/ attach]

/ usr / lib / enigma2 / python / Plugins / Extensions / Stalker / konumuna kopyalayın ve E2'yi yeniden başlatıIt

Quote from kashmir

Hello, I can't get this plugin to work, on my Octagon sf8008, I followed Kiddac's info from the post "274,

but the mac address at the top does not change and I put 3 lines in stalkerconfig that appear, but nothing works although I have tested it before .... understand nothing .....

That file for arm based stb like Zgemma H7
You have to edit plugin.py for your stb

http://178.63.156.75/paneladdo…t47+a3fb06a-r2_sf8008.ipk