stalker portal on enigma2

There are 473 replies in this Thread which was already clicked 174,993 times. The last Post () by biko.

    Quote from urie
    Quote from perob

    No any response ? :unhappy:

    Developer may be busy , but even then he cannot help without basic information, i,e what device are you using and what OS i.e openatv ,vix open Pli just examples and if a specific build.

    Hello. I did not ask developer, I asked colleagues @kashmir and johnnylarue167 which made to work plugin on his device successful with few practise questions, I hope they will answer.

    I am using Vu+Solo 4K (arm) and latest Open BH image.

    Quote from perob
    Quote from urie
    Quote from perob

    No any response ? :unhappy:

    Developer may be busy , but even then he cannot help without basic information, i,e what device are you using and what OS i.e openatv ,vix open Pli just examples and if a specific build.

    Hello. I did not ask developer, I asked colleagues @kashmir and johnnylarue167 which made to work plugin on his device successful with few practise questions, I hope they will answer.

    I am using Vu+Solo 4K (arm) and latest Open BH image.

    Not sure about Vu+Solo 4K (arm) but normal stalker plugin was available in download plugins on my zgemma h9 combo, but not available on my gigablue uhd quad 4k it may be somthing to do with cpu

    Quote from G.S
    Quote from Aliraza63

    What about Solo4k ?

    is stalker qt working for it ?

    If you use VTI image, probably yes.

    I have Open Atv and Stalker qt doesn’t even exist .

    On VTI image just work old stalkerclient, but when You put new files from stalker ziko folder (as it is in short tutorial) can not access on it in plugins, show " stalker - No module named netifaces" but how to fix this.... ? Some lib prblems, probably...

    Stalker not work on Open Black Hole and Pure2 image, on Vu+solo4k.

    Edited 3 times, last by perob ().

    Hi friend, you didn't get an answer because I thought you were going to follow my advice 1, that is to say take the new plugin from Ziko, I remind you that the one you are trying to install is also from Ziko and that if he made a new one, it is precisely to simplify access ......

    I don't have a VU +, so it's a bit complicated for me to tell you that it will work, I know for example that the Zgemma h9s has never worked with ...... I will try to you help if you really want to work hard, but you have the best time to take the new one, it doesn't even change the mac addresses, the top ......

    @kashmir


    I did not ask You about Vu+ and Your experiance with working this plugin with that... I asked You few questions about proccess of instalation (in my post #401) because is not all clear written before, but You didn' t answer me any...I didn't change mac id and I asked also, is it neccessary to be changed ? But no response too. Also HOW TO start stalker portal on ziko version, because have just config in plugins and when make a shortcut in mainmenu and try to open, just flash and nothing....


    Does this new BETA plugin from ziko have SAME main GRAPHIC INTERFACE as a classic stalker portal from ziko, like it is in mag box ?

    Edited 2 times, last by perob ().

    I installed beta plugin multistalker by ziko. Iptv channels work.

    BUT, as I expected, plugin have just basic E2 interface, like a settings list, it is not GUI like a stalker from this theme. Because that, this plugin have just 1 section - for TV, no VIDEOCLUB and other options like STALKER have. I need classic stalker with normal-known GUI where I will have videoclub and other options.

    I appeal to everyone to help me, to make it, if it is possible !

    Your stalker plugin, both - classic and ziko version uploaded in this theme, looks like on the Your screenshots:


    168919-dcaf575b9d9092747915b-jpg


    169289-2c37a68290ab259-jpg


    I need this.

    Edited 2 times, last by perob ().

    Like 1

    Well, I'll try to give you a tutorial, in addition with the online translator not easy .....

    The first thing is to see if you have a downloadable plugin named stalker in the addons of your image ....

    If you have it you download it and then you go to / usr / lib / python / plugins / extensions and there you open Stalker and you replace the 2 files with those which are in the Ziko folder as attachments, named plugin .py and stalker.py ....(They are in / usr / lib etc)

    Here is the first method, the second if you do not have a downloadable Stalker plugin in your image, you put all the attached files in the indicated place ... with right click and attribute 755 ....

    Following the change, you restart the receiver and you go to the stalker plugin, you go down and check the box "show stalker in extensons and main menu, then you go up and blue button, you install stalker config, then you click on the address chosen and you click on yes .... there will be a countdown during which the mac address will be changed then at the end of the 10 seconds, you click on the green save button and you exit ...

    Searching in your image, blue button or whatever, I don't know, I don't have the same system .... you'll just see Stalker, throw and pray ....

    Good luck to you.....

    stalker par Ziko.rar

    Edited once, last by kashmir ().

    Like 1
    Quote from urie
    Quote from kashmir

    Thanks for the usefull information I could install stalker client om my zgemma h9 combo, but it is not available on gigablue uhd quad 4k , I was thinking both (arm) but it must be Hi3798MV200 Main chipset where as the gigablue has BCM7252S processor .

    For gigablue ( mipsel). Python 2 & Pithon3 (depends on the image)

    It is short tutorial as written before, however, thanks for your effort, but not working :(

    On first option, when put 2 files (stalker.py & python.py) in the existing stalkerclient folder, then restart E2, can not enter in plugins, this plugin can not be displayed.

    On second option, when put all files in the adequate paths, with 755 on all, restart E2, do all procedures, restart E2 again, when I try to enter in STALKER in main menu, it just flash and exit...

    I do not change my MAC ID (because have paid portal tied with my mac id) I asked 2-3 times, without answers, MUST WE CHANGE MAC ID ? (Is it apsolutely neccessary to make this to work) I think it is not neccessary because old style stalkerclient work with portal which is tied with my original mc id.

    Problem is, probably, in some plugin files which not to start STALKER player from main menu, on Vu+ Solo 4k. I tested on few images (OBH, OpenSpa, Open Vix, Pure2, VTI)


    Have anyone with solution or ideas how to make this working ? I would be very grateful !


    p.s. If it is not possible (but I deeply hope that it is possible with some tweaks and tricks) how to make STALKER via KODI to work ?

    Edited once, last by perob ().

    That does not surprise me, I believe that all those who have tried with the vu + did not succeed in making it work, buy yourself an octagon sf8008...

    Someone in theme, in pages before, wrote that work on Vu+ with OBH and VTI probably...But I can not get it working.

    So, if anyone know how, please write here.


    I am tired to ask many times :) I will try last time, Is it apsolutely neccessary to CHANGE MAC ID, to make working this or not ?


    p.s. I can installed KODI and I hear that STALKER portal can work on KODI as a repository. Can some tell us how to make it ?

    Hi, if no one answers you, it's because there aren't many people who are interested in this plugin especially since Ziko launched the new one ....

    For information, I remind you that it is Ziko who is also at the base of the Stalker that you want to use and as luck would have it Ziko operates on this fantastic sat forum, the best in my opinion, so ask god rather than his saints ....

    Multi Stalker ziko full for telnet

    Code
    wget -q "--no-check-certificate" https://raw.githubusercontent.com/ziko-ZR1/Multi-Stalker-install/main/Downloads/installer.sh -O - | /bin/sh
    Quote from Myshel
    Quote from perob

    Is it apsolutely neccessary to CHANGE MAC ID, to make working this or not ?

    You cannot change the MAC ID. This is the password for logging into the stalkerportal. The stalker does not depend on it.

    I really do not undestood You...

    In short tutorials on pages 14-17 , say, click on portal url and it will change mac id in few seconds...

    I never do it, because I have portal urd tied with my true mac id, so I asked, Is it a problem if I didn't change my default (true) mac id with that clone mac id...in sense that not working without changing mac...

    Quote from kashmir

    Hi, if no one answers you, it's because there aren't many people who are interested in this plugin especially since Ziko launched the new one ....

    For information, I remind you that it is Ziko who is also at the base of the Stalker that you want to use and as luck would have it Ziko operates on this fantastic sat forum, the best in my opinion, so ask god rather than his saints ....

    I told You why multistalker plugin is not solution for me. Multistalker work, I tested, but work like old stalkerclient in old "e2 settings list" form and no GUI like true stalker in MAG box and like on other systems where we have possibility for videoclub and not just TV channels like in multistalker and old stalkerclient...

    Quote from commando

    Multi Stalker ziko full for telnet

    Code
    wget -q "--no-check-certificate" https://raw.githubusercontent.com/ziko-ZR1/Multi-Stalker-install/main/Downloads/installer.sh -O - | /bin/sh

    Kolega, imas PM na satelitskom forumu vec danima. Ako si u prilici, javi se.

    Edited once, last by perob ().

Your hub for IPTV & streaming support.

Get help with Android apps, Smart TV setup, m3u playlists, channel lists, and finding reliable live streaming websites. Master IPTV streaming on all devices. Find downloads, setup tutorials, and community support for apps, Smart TVs, and m3u channel lists.