Have you installed the plugin?
Stage 1.
Transfer the ipk to /tmp directory,
Stage 2.
Use function in image to install ipk or
Use following command in terminal/putty/dcc
opkg install /tmp/*.ipk
There are 67 replies in this Thread which was already clicked 5,744 times. The last Post () by Gentleman10.
Have you installed the plugin?
Stage 1.
Transfer the ipk to /tmp directory,
Stage 2.
Use function in image to install ipk or
Use following command in terminal/putty/dcc
opkg install /tmp/*.ipk
Is this a case of "no news is good news"?
Display MoreIf you look at the screen, it is pretty self explanatory.
Blue= Restore backup (ignore the "backup" bit, you will be flashing a new image)
Navigate to where you have the image file
Select/highlight image
Yellow to unzip. It will be extracted in the current folder
Highlight the folder then Green to "run flash"
I was not talking about how to use the plugin. It is about how to install it?? I know it is done through Putty but not sure what the command line is...Can you put some details pls.
Display MoreHave you installed the plugin?
Stage 1.
Transfer the ipk to /tmp directory,
Stage 2.
Use function in image to install ipk or
Use following command in terminal/putty/dcc
opkg install /tmp/*.ipk
Ok I will try that...when I go home...
Display MoreIf you look at the screen, it is pretty self explanatory.
Blue= Restore backup (ignore the "backup" bit, you will be flashing a new image)
Navigate to where you have the image file
Select/highlight image
Yellow to unzip. It will be extracted in the current folder
Highlight the folder then Green to "run flash"
Ok now I installed the plug in. I put the folder Vuplus on hard drive and I had to go to Duo2 folder for the plug in to find the files... When I hit green I got choices: 2-root and kernel or 3-root only or 4-kernel only. I chose 2 but the process started for a second but stopped suddenly and nothing happened thereafter. No image was flashed. What went wrong?. I used openvix. Is there a possibility that my receiver is locked and no flashing is possible on it??
You have not followed the instructions. You went one folder too far.
PM me your team viewer details. I wont be hanging around for you. Offer expires 19:30 GMT
You have not followed the instructions. You went one folder too far.
PM me your team viewer details. I wont be hanging around for you. Offer expires 19:30 GMT
Sorry I wont be available for teamviewer until 8 more hours from now. That is why I said it is hard through teamviewer. As for the folder, the plugin wont read anything from vuplus so I had to go to due2 which worked. Now I need to know which option to choose.
Now I need to know which option to choose.
What is it showing you ?
Most people when they come to set of options that they do not know what to do, usually list them for others to advise. If you don't list them, people don't know and will ask. Then several hours later you answer. They respond almost immediately and they wait several hours for you to provide more imformation.
Remember, not everyone has the same receiver/image as you. They are only trying to help you.
You are trying to flash the image.
usually list them for others to advise. If you don't list them, people don't know and will ask. Then several hours later you answer. They respond almost immediately and they wait several hours for you to provide more imformation.
I listed those options that I found in post #45. and I asked which one to choose. I answer late because of the time difference between us. I am at GMT+10 time zone so I may not be available when others answer. I certainly thank all those who try to help.
It looks like somebody is pissed off....
hi again I am in the forum long time u not follow the instruction , from me or abou baniaz ??
u should flash u box from day 1 . but u not do it right . we have give option team vieuwer , is easy to try to find time right , other option u not follow
is easy to take off hard drive take no more then 3 minutes and try to flash it with usb .
and the end make sure u have genuine vuplus range ??? if is clone u can not put original image .
I have long time in the forum and help lots and nobody ask for help flash image take so long ,maximum 2 have was 2 days .was hard drive and usb not compatible .
we are here to help voluntary so you need to follow the information we give u ,and do it , thanks
is easy to take off hard drive take no more then 3 minutes and try to flash it with usb .
and the end make sure u have genuine vuplus range ??? if is clone u can not put original image .
I know you are doing your best to help. I am not saying it is your fault that I cant flash. I actually did all the recommended steps but still cant flash. I took the HD off but the USB still couldnt flash. I have genuine duo2 which I bought from a dealer. The USB is not flashing the device after using all the methods you suggested and after taking the HD out. I know this forum is more helpful than others so I am not blaming anybody. It is no body's fault.
Now pls look at the pic in post 49 and tell me which choice do I take? kernel with root or kernel only or root only? I tried choice 2 but the flash didnt work. I need a long time to try each step because I see your messages 8 hours after they are posted due to my time zone. Pls be patient....
I don't know the method at the pic never done it ok can u try to buy couple usb like 4 gb
when u put usb the box if off then put it on wait until message in front panels ask u to press little power on in front panel door .
u can try with rear input usb .
ok can u try to buy couple usb like 4 gb
when u put usb the box if off then put it on wait until message in front panels ask u to press little power on in front panel door .
u can try with rear input usb .
I tried 1 GB, 2GB and 4GB, put it in front or rear but the front panel never shows anything at all. even when the HD was disconnected. ...
2. Standard.
strange ? in usb u need to have only vuplus folder name .
I think maybe u need to try to reflash u box with genuine image from vuplus ???
aslo maybe u need to update cfe boot loader to let u put recents image
Instructions:
1. Unzip the Duo2_CFE_V2.zip to USB stick.(cfe_cfe_auto.bin, cfe_cfe_auto.md5sum and cfe_cfe_auto.model should be at /vuplus/duo2 folder)
2. Insert USB stick into the USB port of Duo2 and turn the power on.
3. Press the front power button when Update message is shown.
5. It takes just a few seconds to update.
5. If Duo2 displays the message "Finished..reboot", remove the USB stick and restart the box.
5. To update image later, you should delete the all cfe_cfe_auto.* at /vuplus/duo2 in USB stick once CFE update is finished.
Don’t have an account yet? Register yourself now and be a part of our community!