OSCAM 11.434 TivuSat Card HD 4k internal card reader ok !!!

There are 93 replies in this Thread which was already clicked 23,058 times. The last Post () by Dimann.

    [reader]


    label = Tivusat


    description = Tivusat


    protocol = internal


    device = /dev/sci1


    autospeed = 0


    caid = 1856


    mod1 = F4... ok


    key3588 = 420...8A <-- I can't find this value


    data50 = B6...ok


    mod50 = DB... ok

    idird = FF...FF <-- I can't find this value


    forceemmg = 1


    detect = cd


    nagra_read = 1


    detect_seca_nagra_tunneled_card= 0


    mhz = 450


    cardmhz = 2700


    ident = 1856:000000


    group = 1


    emmcache = 1,1,2,0


    blockemm-unknown = 1


    auprovid = 005411




    to install oscam, I go through "ipk" via usb, how to proceed with your files and put them in 775? thank you. I'm quite new

    Sorry for my bad english, i'm french user !

    I was able to install oscam in ipk with nagra merlin nagracak7 support. Gold card (183E) works.

    I have to start with the black card but I'm missing some data...

    Sorry for my bad english, i'm french user !

    Edited once, last by zeze04 ().

    zeze04 ,

    Code
    you first have to exchange the Oscam binary from #22 with your Oscam that you installed via .ipk - look with an FTP program on your box in "usr/bin/" there your Oscam that you installed via .ipk had to be called "oscam". - delete this and unpack the one from #22 and rename it to "oscam" and copy it to "usr/bin/" - set the rights to 755 - then start this Oscam - when oscam has started show the start log

    Edited once, last by sodex ().

    Quote from frynet

    hello, how do i have to update the card?

    Code
    Configure Oscam to write g-emms and s-emms to the card

    AU - oscam.log

    Edited once, last by sodex ().

    OK 1
    Quote from zeze04

    Hello, the files are not recognized. So I reinstalled (painfully) the .ipk file that manages the cak7/nagra merlin (here : https://www.satsupreme.com/sho…51&viewfull=1#post1476451 ), I'm missing the key3588 and idird keys. The card is well recognized in the log. I put the oscam.trunk file in 755 under usr/bin. Thank you

    you need to change oscam and use this one : OSCam-11704 (armv7ve libusb).zip

    here is the procedure from anestis1956 :

    ;

    Hello. I still can't do it! when I put the files correctly, with telnet, 755 and restart everything: oscam does not appear on the receiver, nor on the web interface, with the two files. I also tested on my sf4008: same. is openatv (6.4 or 7.1) compatible? I retested with an oscam ipk; cak7 merlin compatible, oscam files look good, and no decoding. I think I will give up.

    Sorry for my bad english, i'm french user !

    sodex


    Thank you for your quick reply, but I am not sure to have understood what you mean

    - post #22 includes only the bin file and must be renamed to oscam.bin?

    - post #75 keys for mod1 e data88 are to be add to oscam.server?

    - RSAkey on oscam.server is useless?


    Anyway At the moment I am using the oldest tivusat blue card with "ncam" softcam correctly configured.

    I also have the 4K tivusat "black card" with digiquest cam (on smart TV) and I would like to try to use the only card throughout the card reader with oscam (already installed Oscam Cak7 DE) but I need "oscam configs" for the black card, because the ncam configs does not run with black card. Bye

    Edited once, last by Pit28 ().

    Quote from Pit28

    (already installed Oscam Cak7 DE)

    Oscam.Version

    Unix starttime: 1651995190

    Starttime: 08.05.2022 09:33:10

    Version: oscam-1.20_svn-r11704

    Compiler: armv7-linux-gnueabihf

    Box type: vuduo4k (generic)

    PID: 1258

    TempDir: /tmp/.oscam

    ConfigDir: /var/tuxbox/config/

    WebifPort: 17001


    Web interface support: yes

    LiveLog support: yes

    jQuery support intern: yes

    Touch interface support: no

    SSL support: no

    DVB API support: yes

    DVB API with AZBOX support: no

    DVB API with MCA support: no

    DVB API with COOLAPI support: no

    DVB API with COOLAPI2 support: no

    DVB API with STAPI support: no

    DVB API with STAPI5 support: no

    DVB API with NEUTRINO support: no

    DVB API read-sdt charsets: yes

    Irdeto guessing: yes

    Anti-cascading support: no

    Debug mode: yes

    Monitor: yes

    Loadbalancing support: yes

    Cache exchange support: no

    Cache exchange AIO support: no

    CW Cycle Check support: no

    LCD support: no

    LED support: no

    Clockfix with realtime clock: no

    IPv6 support: no


    camd 3.3x: no

    camd 3.5 UDP: yes

    camd 3.5 TCP: yes

    newcamd: yes

    CCcam: yes

    CCcam share: yes

    gbox: no

    radegast: no

    scam: no

    serial: no

    constant CW: no

    Pandora: no

    ghttp: no


    Reader support: yes


    Nagra: yes

    Nagra CAK7 (Merlin/Cameleon/Cayman): yes

    Irdeto: yes

    Conax: yes

    Cryptoworks: yes

    Seca: yes

    Viaccess: yes

    NDS Videoguard: yes

    DRE Crypt: yes

    TONGFANG: yes

    Bulcrypt: yes

    Griffin: yes

    DGCrypt: yes


    cardreader_phoenix: yes

    cardreader_drecas: no

    cardreader_internal_azbox: no

    cardreader_internal_coolapi: no

    cardreader_internal_coolapi2: no

    cardreader_internal_sci: yes

    cardreader_sc8in1: no

    cardreader_mp35: no

    cardreader_smargo: yes

    cardreader_pcsc: no

    cardreader_smartreader: yes

    cardreader_db2com: no

    cardreader_stapi: no

    cardreader_stapi5: no

    cardreader_stinger: yes

    Quote from Pit28

    post #22 includes only the bin file and must be renamed to oscam.bin?

    Code
    no - rename the Oscam Binary from #22 to the name of the Oscam you have installed

    Hi,


    I have a Tivusat 4K black card with oscam, it woks fine BUT, it does not update. If I reactivate it, it is updated until it expires, at the moment my situation is:


    Every minute (circa) in the log I can see EMM-g are received and processed:

    Code
    dvbapi emmtype=global, len=139 (hex: 0x8B), cnt=1: written (91 ms)


    BUT, no "emmtype=shared" are ever logged/received!


    My oscam.server is:


    Keys are fine, it was working yesterday. In oscam.user I do have au=1.

    oscam.dvbiapi is:

    P:1856:000000


    What can be wrong? I really would like to avoid to reactivate (from website) every couple of months!

OSCam Support Forum

Configs, discussion, downloads and guides for OSCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login