OpenPLi 6.2 SSL84 DM800SE original sim SSL84

merci

WiFi seems not to work. I can see wireless networks but can not connect. Any solutions?

Quote from jasonbourne02

WiFi seems not to work. I can see wireless networks but can not connect. Any solutions?

same problem ....No wifi drivers ???

why not install Wifi driver from Feed

try this with FTP over Telent:

opkg update

opkg install kernel-module-r8712u

opkg install firmware-rtl8712u

opkg install kernel-module-rt2800usb

opkg install firmware-rt2870

opkg install kernel-module-arc4

opkg install kernel-module-aes-generic

reboot

if not work try this:

opkg update

opkg install kernel-module-rt2800usb

opkg install firmware-rt2870

opkg install kernel-module-arc4

opkg install kernel-module-aes-generic

reboot

Hi, Just installed the firmware in this thread for my DM 800se.

I could not access softcams through online feed..... looking for oscam that supports streamrelay.

Thanks

I have an issue with fan software.....

When going to deep standby from a streamrelay channel, the fan remains on. I have to switch off the box.

For the rest I am happy with this image.

Any help appreciated. Thanks.

if there are active feeds download fan control that you can modify its parameters as you like, but check if it is already in its menus...??

I did that already....

Is there a way to do it via telnet by opkg update && opkg install? May be there is a newer version. in the feed...

Thanks

FanControl2

download with DCC or other prog.

in usr/lib/enigma2/python/plugin/Extensions

give it 755 rights to all files and restart the box it's a test.

Actually when doing a deep standby from a streamrelay channel, the box will not shut down...it keeps shutting down and this explains why the fan stays on... So I do not see that it is an issue of fan software...

When I do deep standby from another channel it shuts down. The problem is only when doing a deep standby from a streamrelay channel.

Waw... you are right!

I did give attributes 755 to all and shut down as well from a streamrelay channel.

It did it once but now its keeping shutting down again...

Fan Control 2 has the ability to change the fan settings and try out various solutions.

then I think that you have to put a channel that is not encoded if you want it to work correctly, it's like if you start with a car in 3rd gear it's not a regular thing.

Thanks for your time....

After all it is not a big issue...

I programmed the 800se for a friend of mine so I inform him properly what to do....

On my 800se still have newenigma2 running... no complaints except for IPTV....but I can watch IPTV on my other receivers...

Quote from smoky

Thanks for your time....

After all it is not a big issue...

I programmed the 800se for a friend of mine so I inform him properly what to do....

On my 800se still have newenigma2 running... no complaints except for IPTV....but I can watch IPTV on my other receivers...

You can install this image for DM800HDse V1 (Original), OpenPLi 7 (Homebuild), for original boxes, it supports IPTV (GStreamer 1.14.4 Stable, Python 2.7.13)

MEGA : https://mega.nz/#!Cd51nIKD!_7u…xy0MJxIjfvMzCq_cxgUxuuurM

TS

Thanks Toysoft...

I will try that on mine someday...