Posts by toysoft

Its all built-in and working, as it is, latest versions support since few months Dash IPTV/Streaming, but also iCam,

So you should just install and configure, all should work (no need of taking an oscam from any other souce, built-in is ok)

TS

Quote from Marty2000

Hi, I have installed OpenPLi 9.0 on my Zgemma H9 Twin (first version) and now I'm struggling to run my Xbox USB tuner. I have installed ct2-usb-xbox-one-tuner 1.1 from plugin feed, however in the tuner section of the menus my first tuner Si2166D is shown as a combined DVBcT tuner which is incorrect. Basically third tuner which is usually added is missing.

In the drivers section of the plugin feed there are the following related entries,

ct2-usb-xbox-one-tuner 1.1-r0.0

dvb-usb-dib0700 1.1-r0.0

The following is not on the feed,

dvb-usb-mn8847x 1.0-r0

I also tried following commands on another occasion but with the same result as above,

Code

opkg install firmware-mn8847x
opkg install kernel-module-mn88472
opkg install firmware-dvb-demod-mn88472-02
opkg install kernel-module-tda18250
opkg install firmware-dvb-usb-dib0700-1.20
opkg install kernel-module-dvb-usb-dib0700

Any feedback on where can i find the right drivers would be appreciated.

Display More

First thing to check is the USB PID VID... to find out exactly which driver you need for the chipset inside the USB Dongle,

TS

The FBC dual tuner offers the function of 8 individual DVB-C single tuners without an additional loopthrough cable. The signal applied to the RF-IN is passed on internally to the 8 built-in demodulators.

Brand new DVB-C FBC dual tuner from VU+ you can expand your VU+ Uno/Duo/Ultimo 4K/4Kse into a DVB-C octo-tuner receiver.

Supported VU+ set-top boxes:

VU+ 4k/4kse boxes (Uno, Duo, Ultimo)

Price 50 Euro + shipping

pasted-from-clipboard.jpg

pasted-from-clipboard.jpg

Quote from Settings21

Quando un canale non ha segnale va in crash

enigma2_crash_1714730129.log

Traceback (most recent call last):

File "/usr/lib/enigma2/python/Navigation.py", line 88, in dispatchEvent

File "/usr/lib/enigma2/python/Components/ServiceEventTracker.py", line 82, in event

File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 3728, in __tuneFailed

File "/usr/lib/enigma2/python/Tools/Notifications.py", line 66, in AddPopup

File "/usr/lib/enigma2/python/Tools/Notifications.py", line 37, in AddNotificationWithID

File "/usr/lib/enigma2/python/Tools/Notifications.py", line 20, in __AddNotification

File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 3231, in checkNotificationsIfExecing

File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 3265, in checkNotifications

File "/usr/lib/enigma2/python/StartEnigma.py", line 248, in instantiateDialog

return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)

File "/usr/lib/enigma2/python/StartEnigma.py", line 272, in doInstantiateDialog

dlg.applySkin()

File "/usr/lib/enigma2/python/Screens/Screen.py", line 249, in applySkin

File "/usr/lib/enigma2/python/Screens/Screen.py", line 278, in createGUIScreen

File "skin applet", line 43, in <module>

File "/usr/lib/enigma2/python/enigma.py", line 1249, in __init__

TypeError: in method 'new_ePoint', argument 1 of type 'int'

[ePyObject] (CallObject(<bound method Navigation.dispatchEvent of <Navigation.Navigation object at 0xb0dc5538>>,(3,)) failed)

Quote from Looking4Info

It's all over my head to be honest, but think he just wants a shiny new one. 😊

DM900UHD, DM920UHD, DreamOne or DreamTwo...

TS

Quote from Looking4Info

Hi, my husband is looking to upgrade our old dreambox (17years old) and I am doing research trying to find the best available. I found the DM900 but my husband is asking questions about it and my answer is 🥴🤯 so I have come to satellite forums for help and guidance because I am lost at the questions so lost for the answers!

Are the cards swappable in them, can you have up to 4 cards, a mix of satellite and cable?

Which box do you have ? Why not upgrade it to the lastest OpenPLi ?

Perhaps only the upgrade of the software would get your box at the highest level / functionnalities of today,

TS

The v2 will load only on v2, if your sticker with serial number has no v2, then you have v1,

TS

For DM8000HD, install this and before booting replace the SSL, and after boot replace the bcm driver file,

TS

DM8000HD : OpenPLi 8.xStar 20240319 GSt 1.20.5 (Japhar)

openpli-enigma2-8xstar-dm8000_20240319_Japhar

OpenPLi Release by OpenPLi Team, March 19th, 2024

- Python 3.9.9

- GStreamer 1.20.5

- FFMpeg 5.1.2 and Exteplayer3, ServiceApp (Dash Support)

- EPGImport Built-in

- AC3+/DDP/EAC3 support

- Feeds online (For Wifi/DVB-T Dongles)

- DVB-T USB, Trial Tuner, from JAM (Hauppauge, A867, etc)

- Wifi Realtek, Ralink, Mediatek Supported

- IPTV Support with Built-in

1300 Free To Air FREE IPTV Channels from their broadcaster

100+ VoD Free To Air Public Domain Movies and more coming soon (Charlot, Keaton, etc)

- Japhar Sim required

DM8000HD :

http://openpli8xstar.japhar.net/OpenPLi8xstar/openpli-enigma2-8xstar-dm8000.nfi

Patch from Japhar to Original :

http://openpli8xstar.japhar.net/OpenPLi8xstar/Patch_Original_DM8000HD.rar

Try this image (for v1 or v2), all working,

TS

DM7020HD : OpenPLi 8.xStar 20240319 GSt 1.20.5 (Japhar)

openpli-enigma2-8xstar-dm7020hd

OpenPLi Release by OpenPLi Team, March 19th, 2024

- Python 3.9.9

- GStreamer 1.20.5

- FFMpeg 5.1.2 and Exteplayer3, ServiceApp (Dash Support)

- EPGImport Built-in

- AC3+/DDP/EAC3 support

- Feeds online (For Wifi/DVB-T Dongles)

- DVB-T USB, Trial Tuner, from JAM (Hauppauge, A867, etc)

- Wifi Realtek, Ralink, Mediatek Supported

- IPTV Support with Built-in

1300 Free To Air FREE IPTV Channels from their broadcaster

100+ VoD Free To Air Public Domain Movies and more coming soon (Charlot, Keaton, etc)

DM7020HD :

http://openpli8xstar.japhar.net/OpenPLi8xstar/openpli-enigma2-8xstar-dm7020hd.nfi

DM7020HDv2 : OpenPLi 8.xStar 20240319 GSt 1.20.5

openpli-enigma2-8xstar-dm7020hdv2

OpenPLi Release by OpenPLi Team, March 19th, 2024

- Python 3.9.9

- GStreamer 1.20.5

- FFMpeg 5.1.2 and Exteplayer3, ServiceApp (Dash Support)

- EPGImport Built-in

- AC3+/DDP/EAC3 support

- Feeds online (For Wifi/DVB-T Dongles)

- DVB-T USB, Trial Tuner, from JAM (Hauppauge, A867, etc)

- Wifi Realtek, Ralink, Mediatek Supported

- IPTV Support with Built-in

1300 Free To Air FREE IPTV Channels from their broadcaster

100+ VoD Free To Air Public Domain Movies and more coming soon (Charlot, Keaton, etc)

DM7020HD :

http://openpli8xstar.japhar.net/OpenPLi8xstar/openpli-enigma2-8xstar-dm7020hdv2.nfi

In the Webif, but connected to the IP of the box with Telnet,

TS

Try to flash this one, but first do,

1) Reboot your router/modem

2) If you can, reset your BIOS (of the DM820HD)

3) Then Flash the image .tar.xz below,

TS

DM820HD : OpenPLi 8.xStar 20240319 GSt 1.20.5

openpli-enigma2-8xstar-dm820.root.tar.xz

OpenPLi Release by OpenPLi Team, March 19th, 2024

- Python 3.9.9

- GStreamer 1.20.5

- FFMpeg 5.1.2 and Exteplayer3, ServiceApp (Dash Support)

- EPGImport Built-in

- AC3+/DDP/EAC3 support

- Feeds online (For Wifi/DVB-T Dongles)

- DVB-T USB, Trial Tuner, from JAM (Hauppauge, A867, etc)

- Wifi Realtek, Ralink, Mediatek Supported

- IPTV Support with Built-in

1300 Free To Air FREE IPTV Channels from their broadcaster

100+ VoD Free To Air Public Domain Movies and more coming soon (Charlot, Keaton, etc)

DM820HD :

http://openpli8xstar.japhar.net/OpenPLi8xstar/openpli-enigma2-8xstar-dm820.rootfs.tar.xz

Quote from service1

Mine is v2 too (no modem card)

The above image is for v2,

TS

Quote from service1

Of course is not, is the image OpenPli 12.3 custom build, i've just change the bootlogo like your image.

Hardware data are same like your DM7020HDv2 ?

No, v2 is not same as v1.

TS

Quote from pappagone2000

Quote from toysoft

You can install images via the USB Stick, I would do that way... an image that has support of Wifi (most of them), using a good Wifi Dongle (Ralink/Mediatek or Realtek chipsets are the most supported).

Code

Flash any image on Dreambox (DM900),


1- Format USB with Fat-32
2- Label usb "DREAMFLASH"
3- Copy image to USB Drive
4- Rename image "dreambox-image-dm900.tar.xz"
5- Insert USB to receiver
6- Now from standby menu select Recovery Mode
or Shut Down your receiver and then press and hold touch button of receiver
or from telnet give any one of below commands


to-the-rescue
or
echo "rescue" >> /proc/stb/fp/boot_mode
reboot

Display More

The OpenPLi below has a last variety of USB Wifis compatible,

TS

DM900UHD : OpenPLi 8.xStar 20240319 GSt 1.20.5 (Original)

openpli-enigma2-8xstar-dm900.root.tar.bz2

OpenPLi Release by OpenPLi Team, March 19th, 2024

- Python 3.9.9

- GStreamer 1.20.5

- FFMpeg 5.1.2 and Exteplayer3, ServiceApp (Dash Support)

- EPGImport Built-in

- AC3+/DDP/EAC3 support

- Feeds online (For Wifi/DVB-T Dongles)

- DVB-T USB, Trial Tuner, from JAM (Hauppauge, A867, etc)

- Wifi Realtek, Ralink, Mediatek Supported

- IPTV Support with Built-in

1300 Free To Air FREE IPTV Channels from their broadcaster

100+ VoD Free To Air Public Domain Movies and more coming soon (Charlot, Keaton, etc)

DM900UHD :

Code

http://openpli8xstar.japhar.net/OpenPLi8xstar/openpli-enigma2-8xstar-dm900_web.zip

Display More

You say to rename "Rename image "dreambox-image-dm900.tar.xz"". How do I rename a file that has another extension?

http://openpli8xstar.japhar.ne…gma2-8xstar-dm900_web.zip

Display More

Open the zip file, inside you have a tar.xz or tar.gz, rename into dreambox-image-dm900.tar and what it is (xz or gz). Use then that file for the flashing with USB Memory stick.

TS

Quote from service1

Attached the receiver configuration, if can help to understand something more about it.

P.S.
I've change the bootlogo and bootlogo wait by Dream Logo Generator (a exe from 2010 still working today )

2023 July, that's doesn't look like my image,

TS

You can install images via the USB Stick, I would do that way... an image that has support of Wifi (most of them), using a good Wifi Dongle (Ralink/Mediatek or Realtek chipsets are the most supported).

Flash any image on Dreambox (DM900),


1- Format USB with Fat-32
2- Label usb "DREAMFLASH"
3- Copy image to USB Drive
4- Rename image "dreambox-image-dm900.tar.xz"
5- Insert USB to receiver
6- Now from standby menu select Recovery Mode
or Shut Down your receiver and then press and hold touch button of receiver
or from telnet give any one of below commands


to-the-rescue
or
echo "rescue" >> /proc/stb/fp/boot_mode
reboot

The OpenPLi below has a last variety of USB Wifis compatible,

TS

DM900UHD : OpenPLi 8.xStar 20240319 GSt 1.20.5 (Original)

openpli-enigma2-8xstar-dm900.root.tar.bz2

OpenPLi Release by OpenPLi Team, March 19th, 2024

- Python 3.9.9

- GStreamer 1.20.5

- FFMpeg 5.1.2 and Exteplayer3, ServiceApp (Dash Support)

- EPGImport Built-in

- AC3+/DDP/EAC3 support

- Feeds online (For Wifi/DVB-T Dongles)

- DVB-T USB, Trial Tuner, from JAM (Hauppauge, A867, etc)

- Wifi Realtek, Ralink, Mediatek Supported

- IPTV Support with Built-in

1300 Free To Air FREE IPTV Channels from their broadcaster

100+ VoD Free To Air Public Domain Movies and more coming soon (Charlot, Keaton, etc)

DM900UHD :

http://openpli8xstar.japhar.net/OpenPLi8xstar/openpli-enigma2-8xstar-dm900_web.zip

Quote from service1

I tried once again to install the OpenPLi 8.xStar 20240319 GSt 1.20.5 image, as per previous it writes to the memory but then doesn't start. I think the problem is on this decoder, so I would like to try it on another DM7020v2 with this image.

Meanwhile I tried Exteplayer3 updated to the latest version (also serviceapp updated to the latest version)

the video stream is perfect, but not the audio. With mpeg audio everything is fine, while with AAC sometimes it works and sometimes it doesn't.

At the moment I have not changed the default settings.

HDBITT on the other hand works perfectly.
(image OpenPli 12.3 custom build)

Display More

Here it works fine on my DM7020HDv2 that I bought to test the image before it's publication to confirm it was ok,

TS

Quote from service1

Unfortunately I have to say that I didn't make any changes to the image.

I doubt the problem is the receiver though. I bought this DM7020HDv2 for a few euros, to do some tests and to expand the points to the stream in the home network.

The receiver has two BCM4505 tuners that work partialy, do not execute diseqc commands well and do not receive all frequencies correctly.

I have not investigated whether it is a power supply problem on the motherboard or whether the previous owner damaged them for example by connecting live sources to the tuners themselves.

Anyway, I decided to leave the 2021 newnigma2 and use the OpenPli 12.3 custom build, a truly excellent job was done, congratulations to the developer.

I did this due to the presence of GStreamer 1.22.6 which, however, despite having installed all the additional components, the media player cannot correctly read the streams coming from the master dreambox, but instead correctly decode an HDBITT multicast encoder present into the network (see picture below).

I'll get another receiver in a few weeks and then I'll be back here.

B.R.

Screenshot 2024-04-22 212037.png

Display More

Use Exteplayer3... works MUCH better. Try this one below that has it built-in, as well as iCam and Dash IPTV,

TS

DM7020HDv2 : OpenPLi 8.xStar 20240319 GSt 1.20.5

openpli-enigma2-8xstar-dm7020hdv2

OpenPLi Release by OpenPLi Team, March 19th, 2024

- Python 3.9.9

- GStreamer 1.20.5

- FFMpeg 5.1.2 and Exteplayer3, ServiceApp (Dash Support)

- EPGImport Built-in

- AC3+/DDP/EAC3 support

- Feeds online (For Wifi/DVB-T Dongles)

- DVB-T USB, Trial Tuner, from JAM (Hauppauge, A867, etc)

- Wifi Realtek, Ralink, Mediatek Supported

- IPTV Support with Built-in

1300 Free To Air FREE IPTV Channels from their broadcaster

100+ VoD Free To Air Public Domain Movies and more coming soon (Charlot, Keaton, etc)

DM7020HD :

http://openpli8xstar.japhar.net/OpenPLi8xstar/openpli-enigma2-8xstar-dm7020hdv2.nfi

There is NO password,

TS

Quote from portinho

I have transfer channel list with dreamboxedit, but in this image happens what i say before.

When i install GigaBlue 800se : OpenPLi 8.0Star 20210720 1.18.3 works OK.

I have no issue with my channel lists, try latest DreamSet,... also check if your transfer doesn't fail (for example because you have not enough Flash memory available).

Also, after such channellist update, reboot your box.

TS