Reflash a clean image, generally it gets your box back to "new".
TS
Posts by toysoft
-
-
You have to use the linux tools, such as fdisk / format tool / mount, etc. Naturally you have to find the partition first, here on example we use sda1
Codeumount /dev/sda1 mkdosfs -n hdd /dev/sda1 mkdir /media/hdd mount /dev/sda1 /media/hddTS
-
I have this one below, for mipsel32, from a recent compile,
TS
-
Hi, I need an os_11884 for a DM800SE receiver that will help me.
oscam is compiled for the image, and will depend of the libraries on that image, so it would fail if trying to run it with another image or version of image. Generally you need to update it thru the feeds.
TS
-
hi guys, this version has OpenPLi 9.xStar 20250328 + FFMpeg and GStreamer
openpli-enigma2-9xstar-dm800se_with_Full_Installation_on_HDD.zip has oscam or not help
Yes, there is on the image / feeds,
TS
-
-
OK, the wireless network plug-in was missing.
Another question: is there any way to use HDMI-CEC?
It's missing in the Audio/Video->HDMI-CEC menu.
Storm tried to implement it, but it's a no go on this image, try his latest images (OpenATV built with Captain, and the OBH) as he done some tries about the HDMI-CEC,
TS
-
DreamOne has bulit in Wifi
Correct, I was thinking to be on the DM920 image.
There is all Radio (Wifi, etc) drivers in the image, try the 8.xStar as well. Try the other connections (the active one is RJ45),
TS
-
why no support for internal wifi?
These DM920UHD have no Wifi, you add dongles and there is hundreds available, so you need to install via the Feeds for your Wifi Dongle and the driver for it's Chipset.
TS
-
Found this with google,
DM800 Remote Controler ?Hi, I am a new owner of a Gigablue HD Ultra UE. The previous owner lost the original Remote control, and gave me a Dreambox DM800 HD Remote controler instead.…world-of-satellite.com -
Which remote controls do you have for the DM800HD and for the DM920UHD,
https://dmm-tv.com/dreambox/RC20/
TS
-
If you don't use teh DM800HD, just put a paper where is the little square, where is the LED and the silver button.
If you use it, the DM920UHD could also support the BT Remote Control, so you could upgrade (little board + RT), then both will use different RC.
TS
-
la promo sur biss tv sur le 5 wouest et ouverte les chaine son gratuite jusquaux 7 octobre
BISS ou BiS
BIS / Fransat,
TS
-
What kind of language is it????Chinese??????
French, as this is the French section of the Forum, and... here you should post only in French !
---------
Français, car c'est la section française du Forum, et... ici vous ne devriez poster qu'en français !
TS
-
You probably corrupted some of the configuration files or the bin executable of the ftpd,...
In such cases I would backup the configuration files, and reinstall the clean image. as it could have caused also some libraries to be updated, etc, and so could have corrupted much more.
TS
-
Use WinSCP, with the SSH file transfer method,
If you can still connect to the box with Putty, it will do what you need,
TS
-
Thanks both.
You need to try and activate debug and log the activity of the plugin when using the remote tuner. The plugin only listens (and acts on) certain stream events, so if it's breaking things, it's because the remote tuner is raising those; a log would be most interesting to try and understand what's happening. I'll also ask some folks that might be using both remote tuner and QP if it's breaking for them or not, as it's the first I'm hearing about it.
Eventually, as a workaround, you can probably ignore some of the streams by matching on them in the plugin configuration (do this after you capture a debug log where the stream is broken, and then try to capture another debug log if that workaround fixes things).
I installed openpli on a DM7080, and on a DM520-T2/C, the DM520 takes from the DM7080 the Sat tuner, and the DM520 does these funny things, so it looks like to me that the plugin thinks the stream is down, as when I see it appearing after 1-2 seconds, it stops and stays black. Using the remote Tuner, I think on other open images, would have the same behavior as on my test. I had to reinstall the openpli without your plugin, and all is working fine on the DM7080 Remote Tuner streams feeded to the DM520.
TS
-
Display MoreDisplay MoreDisplay More
i know that exteplayer uses very little cpu power out of all the players so was just trying to confirm which one ziko recommends gstplayer is ext 5001 also. thanks guys.
you guys should also try the quarter pound ipk file it restarts the stream automatically if it stops or buffers etc if using exteplayer...very useful
i dont think quarter pounder stream restarter works on other players not sure though as i tested some time ago. 100% works on exteplayer though.
current latest version 6.2 OU
I would like to give a feedback, when the enigma2 box uses a remote tuner (so no hardware tuner is activated and you use a remote ox tuner), the video flux stays black, then appear, and then goes black immediately after.
Perhaps it try to restart the stream, but in that configuration this plugin is breaking the remote tuner on openpli (and other images I think),
Just to let you know,
TS
Good to hear your report but , why not actuall tag oottppxx and let him know not everyone is using remote tuner.
Thank you, I didn't know exactly who was the author, so I replied to the first post. Thank you a lot, now hopefully he knows about it.
TS
-
Display More
i know that exteplayer uses very little cpu power out of all the players so was just trying to confirm which one ziko recommends gstplayer is ext 5001 also. thanks guys.
you guys should also try the quarter pound ipk file it restarts the stream automatically if it stops or buffers etc if using exteplayer...very useful
i dont think quarter pounder stream restarter works on other players not sure though as i tested some time ago. 100% works on exteplayer though.
current latest version 6.2 OU
I would like to give a feedback, when the enigma2 box uses a remote tuner (so no hardware tuner is activated and you use a remote ox tuner), the video flux stays black, then appear, and then goes black immediately after.
Perhaps it try to restart the stream, but in that configuration this plugin is breaking the remote tuner on openpli (and other images I think),
Just to let you know,
TS
-
when will openpli 10star be available?
We will do, i cannot tell you a date, but definitely we will continue as we did also the 9.xStar, but only when the official version is out, not the betas or testing ones.
TS
