Posts by toysoft

Quote from smoky

Hi Toysoft the above link for 7020 v1 is opening version 8.

Today the software stalled and when I install again it is becoming very slow to respond and freezes...

I think its a memory problem.. is there any software to check hardware issues?

Check the capacitors on the motherboard (near to the smartcard reader), just to be sure these are now EOL, with an hill on top I had one like that and the box was acting as you describe.

You can also just reflash the image and see if you have the same problems or not,

TS

Quote from Gugo111

OpenPLi-7.2rc-ssl84D-DM800SE-mod-by-Monja

There is OpenPLi 8.x and 9.x for the DM800HDse,

BUT you will need to have the right sim for these images (Japhar Team still supports your box, other team just vanished), as there is still support (these two use to have all extended IPTV support, an USB Memory dongle or the hdd in the box).

See here :

- OpenPLi 9.x for DM800HDse

UBB Message - Our Dreambox World - Japhar Sim Forum - http://www.japhar.com/ - SuperSim

- OpenPLi 8.x for DM800HDse

UBB Message - Our Dreambox World - Japhar Sim Forum - http://www.japhar.com/ - SuperSim

TS

Here, 7.4,

UBB Message - Our Dreambox World - Japhar Sim Forum - http://www.japhar.com/ - SuperSim

7.3,

UBB Message - Our Dreambox World - Japhar Sim Forum - http://www.japhar.com/ - SuperSim

TS

Only 8.0,

OpenATV Downloads

TS

Quote from saffet usta

4 adet ayrı ayrı usb ile denedim 1 gb 4 gb 8 gb 32 gb usb yi görmüyor ilgilendiğiniz için teşekkür ederi,m- 4 Gb'den küçük ve FAT/FAT32 formatlı küçük bir USB ile tekrar deneyin. denedim

Use the 1 Gb, formatted in FAT, and put the folder of the image (vuplus, and keep as it is on the .zip file subfolders),

Try this image : http://openpli9xstar.japhar.ne…pli-9xstar-vuzero_usb.zip

TS

Quote from saffet usta

vu zero hd usb yi görmüyor yazılım atamıyorum açılışta boot ekranında kaldı yardımcı olacak olan arkadaşlara şimden teşekkürler burda yazılanları uyguladım olmadı birtek rs232 kablosıyla olan yüklemesini yapamadım buna uygun kablo bulamadım

vu zero does not see HD USB, I cannot send the software, it remained on the boot screen at startup, thank you in advance to my friends who will help me, I applied what is written here, but it did not work, I could not install it with the rs232 cable, I could not find a suitable cable for it

Most probably you use a USB Stick not formatted properly or too large, try again with a small USB like less than 4 Gb, formatted in FAT/FAT32.

TS

Quote from smoky

Hi Toysoft,

In order to do a full backup for 8000HD which file I have to choose from the zip file?

For 7020HD, I chose backup_dm7020hd.sh

And after the backup should I delete the dreambox folder containing the extracted files from the zip file?

Thanks.

Display More

I already replied to you, you can use the ./backup.sh or the ./backup_original.sh

TS

The 9.x is a compile of the official version, the other is a version called openpli, which has huge differences from the original one. Any are good, but Japhar supports the 9.x, the other one you need the support from the conceptors.

TS

Quote from zudrick

I found out that the transmission was faulty not my system, since this i have found out the channel hash / universal hash had changed from the one i had in my softcam.key file and since correcting it the channels have come on infact there are now 5 and all are working, as for the images openpli (openpli-15.2-dm920-original-20260210) do a version 15.2 for mine so i'm going to try it.

One question i would like to ask is can i backup my present system to my hard drive, i can remember some years ago i could do it on my DM8000 think it was barry allen or something like that?

You have a cable tuner ? If yes, and using an Open images, it creates at the top of the list a channel list for the cable. On the setup of the Cable Tuner, you can deactivate the creation of such bouquet.

Remember that if you have it as well, and it's not cable, you will have as well to remove from the bouquets.tv, the link that calls that .tv file. The file is as well in /etc/enigma2

TS

FTP or Telenet/SSH to the box, into the folder /etc/enigma2 and remove the file,

TS

Quote from zudrick

For starters i have pure 7.6 installed on the above set ( i upgraded from an older DM8000 HD PVR) i have scanned Astra @ 19.2e and it has found 3 of the for-mentioned channels my cam (oscam) which works and my softcam keys are up to date, nothing on 1 and 2 but when i select Astra1M Service 3 i'm getting a buzzing sound and the picture flashes but mainly black. I have the correct softcam key and the universal hash for this channel does anyone know why this isn't displaying. TIA?

PurE2 is a good image, and you can import the DM8000HD List with DreamSet or DreamBoxEdit, then reload it to the image you installed on your DM920UHD.

If you want to try another image, you can always try the unofficial OpenPLi 9.x, which is available on the link below, and is from March 2026

OpenPLi 9xStar IPTV - Our Dreambox World - Japhar Sim Forum - http://www.japhar.com/ - SuperSim3

Let us know the result of your tests with PurE2 and OpenPLi, you can always load with the Setting tools your list from the DM8000HD, and then do a full rescan of the satellites, I would do that way (So you have for sure the right parameters for the H265/UHD channels supported by the DM920UHD and not by the DM8000HD).

TS

Quote from passata

more channels added

NetPlus package, userbouquet with 241 channels (subscription channels included but not work)

Only the Free channels work

You should try with the OpenPLi 9.x and Exteplayer3, Control with VLC the codecs needed.

TS

pasted-from-clipboard.png

pasted-from-clipboard.png

Quote from passata

My netplus.ch Free iptv userbouquet file (124 channels) /etc/enigma2/userbouquet.netplus.tv

It works on my box without a VPN. I live outside the geo-restricted zone.

I haven't added any EPG references. Maybe someone can do it.

Merci ! Grazie ! Danke !

TS

Quote from mpokeras

Quote from toysoft

On newer generation of boxes, after DM7020v2, etc, they use a TPM chip (you can see it on the DM800HDseV2, also DM900UHD),

TS

pasted-from-clipboard.png

As mentioned earlier, I'm waiting the new tuner for opening it again...but I can't recall a sim or a chip in that place!

Display More

That's a photo of the DM900UHD, on the DM7020HD the sim is if I remember well at the right of the smartcard reader.

TS

On newer generation of boxes, after DM7020v2, etc, they use a TPM chip (you can see it on the DM800HDseV2, also DM900UHD),

TS

pasted-from-clipboard.png

Quote from mpokeras

Help! this receiver is driving me crazy!

After disconnection of antennas and removing both (add in) slot tuners the receiver was rebooted and

1. both build in tuners are visible and operational.

2. then adding the dvb-t tuner in slot C, is fine!

3. then adding one more dvb-s2 tuner in slot B, still fine!

Note, this is with original Dreambox OS

(see pictures)

Now reinstalling the Openpli 9x, reverting with results but the thing is that I cant reproduce a situation, its random and chaotic!

Display More

Sometimes these could be due to the fact that the original drivers/image setup some microcode in the tuners/chipset, then you can install open images which use "standard drivers".

If you try openpli, can you let me know if the two smartcard readers work, or only the sci0, as on my box which I test with my openpli, I have only the sci0 and not the sci1 that works.

Thanks.

TS

Quote from jocke90s

Okey thanks. So useless with fbc tuner but only one CI slot basically.

There is "professional" CI+, which decode all the streams,... so you need to find one of these (generally for "Building sat TV distribution")

TS

Quote from mpokeras

Oh, man! I'm facing crazy situation with this box.

HDMI matter was related with HDCP, somehow cant talk to this monitor with that cable but same cable is perfectly fine with a newer TV!

For the time being is connected with a HDMI 2.0 cable to the TV of salon and the sound is passing through.

The problem with built in tuner reappeared on relocation and clean flash of openpli Jafar's version. Dismantled, inspected for loose contact but no luck.

Same situation with openATV 7.6....

Really, I have lost it! I can recall such mess only with DGS IP9000 long time ago...

Need ideas for testing

PS the present layout is 2 x build in tuners (not visible), 1x 4505, 1xTU1216 (DVB-T)

Display More

I installed on mine, 2 tuners, the DVB-C and the Combo one, see below, working good, the DVB-T (old one) was't recognized,

TS

pasted-from-clipboard.png

The worst scenario, would be to have the chipset burnt on the Audio HDMI output track... check all the other audio outputs as well,

TS

Setup to HDMI output, and not other

Generally the problem on older boxes with SCART + HDMI appears when you setup SCART and use the HDMI output, etc. Audio will come only if you set it to the DVI (HDMI)...

TS