Posts by toysoft

For DM8000HD, install this and before booting replace the SSL, and after boot replace the bcm driver file,

TS

DM8000HD : OpenPLi 8.xStar 20240319 GSt 1.20.5 (Japhar)

openpli-enigma2-8xstar-dm8000_20240319_Japhar

OpenPLi Release by OpenPLi Team, March 19th, 2024

- Python 3.9.9

- GStreamer 1.20.5

- FFMpeg 5.1.2 and Exteplayer3, ServiceApp (Dash Support)

- EPGImport Built-in

- AC3+/DDP/EAC3 support

- Feeds online (For Wifi/DVB-T Dongles)

- DVB-T USB, Trial Tuner, from JAM (Hauppauge, A867, etc)

- Wifi Realtek, Ralink, Mediatek Supported

- IPTV Support with Built-in

1300 Free To Air FREE IPTV Channels from their broadcaster

100+ VoD Free To Air Public Domain Movies and more coming soon (Charlot, Keaton, etc)

- Japhar Sim required

DM8000HD :

http://openpli8xstar.japhar.net/OpenPLi8xstar/openpli-enigma2-8xstar-dm8000.nfi

Patch from Japhar to Original :

http://openpli8xstar.japhar.net/OpenPLi8xstar/Patch_Original_DM8000HD.rar

Try this image (for v1 or v2), all working,

TS

DM7020HD : OpenPLi 8.xStar 20240319 GSt 1.20.5 (Japhar)

openpli-enigma2-8xstar-dm7020hd

OpenPLi Release by OpenPLi Team, March 19th, 2024

- Python 3.9.9

- GStreamer 1.20.5

- FFMpeg 5.1.2 and Exteplayer3, ServiceApp (Dash Support)

- EPGImport Built-in

- AC3+/DDP/EAC3 support

- Feeds online (For Wifi/DVB-T Dongles)

- DVB-T USB, Trial Tuner, from JAM (Hauppauge, A867, etc)

- Wifi Realtek, Ralink, Mediatek Supported

- IPTV Support with Built-in

1300 Free To Air FREE IPTV Channels from their broadcaster

100+ VoD Free To Air Public Domain Movies and more coming soon (Charlot, Keaton, etc)

DM7020HD :

http://openpli8xstar.japhar.net/OpenPLi8xstar/openpli-enigma2-8xstar-dm7020hd.nfi

DM7020HDv2 : OpenPLi 8.xStar 20240319 GSt 1.20.5

openpli-enigma2-8xstar-dm7020hdv2

OpenPLi Release by OpenPLi Team, March 19th, 2024

- Python 3.9.9

- GStreamer 1.20.5

- FFMpeg 5.1.2 and Exteplayer3, ServiceApp (Dash Support)

- EPGImport Built-in

- AC3+/DDP/EAC3 support

- Feeds online (For Wifi/DVB-T Dongles)

- DVB-T USB, Trial Tuner, from JAM (Hauppauge, A867, etc)

- Wifi Realtek, Ralink, Mediatek Supported

- IPTV Support with Built-in

1300 Free To Air FREE IPTV Channels from their broadcaster

100+ VoD Free To Air Public Domain Movies and more coming soon (Charlot, Keaton, etc)

DM7020HD :

http://openpli8xstar.japhar.net/OpenPLi8xstar/openpli-enigma2-8xstar-dm7020hdv2.nfi

In the Webif, but connected to the IP of the box with Telnet,

TS

Try to flash this one, but first do,

1) Reboot your router/modem

2) If you can, reset your BIOS (of the DM820HD)

3) Then Flash the image .tar.xz below,

TS

DM820HD : OpenPLi 8.xStar 20240319 GSt 1.20.5

openpli-enigma2-8xstar-dm820.root.tar.xz

OpenPLi Release by OpenPLi Team, March 19th, 2024

- Python 3.9.9

- GStreamer 1.20.5

- FFMpeg 5.1.2 and Exteplayer3, ServiceApp (Dash Support)

- EPGImport Built-in

- AC3+/DDP/EAC3 support

- Feeds online (For Wifi/DVB-T Dongles)

- DVB-T USB, Trial Tuner, from JAM (Hauppauge, A867, etc)

- Wifi Realtek, Ralink, Mediatek Supported

- IPTV Support with Built-in

1300 Free To Air FREE IPTV Channels from their broadcaster

100+ VoD Free To Air Public Domain Movies and more coming soon (Charlot, Keaton, etc)

DM820HD :

http://openpli8xstar.japhar.net/OpenPLi8xstar/openpli-enigma2-8xstar-dm820.rootfs.tar.xz

Quote from service1

Mine is v2 too (no modem card)

The above image is for v2,

TS

Quote from service1

Of course is not, is the image OpenPli 12.3 custom build, i've just change the bootlogo like your image.

Hardware data are same like your DM7020HDv2 ?

No, v2 is not same as v1.

TS

Quote from pappagone2000

Quote from toysoft

You can install images via the USB Stick, I would do that way... an image that has support of Wifi (most of them), using a good Wifi Dongle (Ralink/Mediatek or Realtek chipsets are the most supported).

Code

Flash any image on Dreambox (DM900),


1- Format USB with Fat-32
2- Label usb "DREAMFLASH"
3- Copy image to USB Drive
4- Rename image "dreambox-image-dm900.tar.xz"
5- Insert USB to receiver
6- Now from standby menu select Recovery Mode
or Shut Down your receiver and then press and hold touch button of receiver
or from telnet give any one of below commands


to-the-rescue
or
echo "rescue" >> /proc/stb/fp/boot_mode
reboot

Display More

The OpenPLi below has a last variety of USB Wifis compatible,

TS

DM900UHD : OpenPLi 8.xStar 20240319 GSt 1.20.5 (Original)

openpli-enigma2-8xstar-dm900.root.tar.bz2

OpenPLi Release by OpenPLi Team, March 19th, 2024

- Python 3.9.9

- GStreamer 1.20.5

- FFMpeg 5.1.2 and Exteplayer3, ServiceApp (Dash Support)

- EPGImport Built-in

- AC3+/DDP/EAC3 support

- Feeds online (For Wifi/DVB-T Dongles)

- DVB-T USB, Trial Tuner, from JAM (Hauppauge, A867, etc)

- Wifi Realtek, Ralink, Mediatek Supported

- IPTV Support with Built-in

1300 Free To Air FREE IPTV Channels from their broadcaster

100+ VoD Free To Air Public Domain Movies and more coming soon (Charlot, Keaton, etc)

DM900UHD :

Code

http://openpli8xstar.japhar.net/OpenPLi8xstar/openpli-enigma2-8xstar-dm900_web.zip

Display More

You say to rename "Rename image "dreambox-image-dm900.tar.xz"". How do I rename a file that has another extension?

http://openpli8xstar.japhar.ne…gma2-8xstar-dm900_web.zip

Display More

Open the zip file, inside you have a tar.xz or tar.gz, rename into dreambox-image-dm900.tar and what it is (xz or gz). Use then that file for the flashing with USB Memory stick.

TS

Quote from service1

Attached the receiver configuration, if can help to understand something more about it.

P.S.
I've change the bootlogo and bootlogo wait by Dream Logo Generator (a exe from 2010 still working today )

2023 July, that's doesn't look like my image,

TS

You can install images via the USB Stick, I would do that way... an image that has support of Wifi (most of them), using a good Wifi Dongle (Ralink/Mediatek or Realtek chipsets are the most supported).

Flash any image on Dreambox (DM900),


1- Format USB with Fat-32
2- Label usb "DREAMFLASH"
3- Copy image to USB Drive
4- Rename image "dreambox-image-dm900.tar.xz"
5- Insert USB to receiver
6- Now from standby menu select Recovery Mode
or Shut Down your receiver and then press and hold touch button of receiver
or from telnet give any one of below commands


to-the-rescue
or
echo "rescue" >> /proc/stb/fp/boot_mode
reboot

The OpenPLi below has a last variety of USB Wifis compatible,

TS

DM900UHD : OpenPLi 8.xStar 20240319 GSt 1.20.5 (Original)

openpli-enigma2-8xstar-dm900.root.tar.bz2

OpenPLi Release by OpenPLi Team, March 19th, 2024

- Python 3.9.9

- GStreamer 1.20.5

- FFMpeg 5.1.2 and Exteplayer3, ServiceApp (Dash Support)

- EPGImport Built-in

- AC3+/DDP/EAC3 support

- Feeds online (For Wifi/DVB-T Dongles)

- DVB-T USB, Trial Tuner, from JAM (Hauppauge, A867, etc)

- Wifi Realtek, Ralink, Mediatek Supported

- IPTV Support with Built-in

1300 Free To Air FREE IPTV Channels from their broadcaster

100+ VoD Free To Air Public Domain Movies and more coming soon (Charlot, Keaton, etc)

DM900UHD :

http://openpli8xstar.japhar.net/OpenPLi8xstar/openpli-enigma2-8xstar-dm900_web.zip

Quote from service1

I tried once again to install the OpenPLi 8.xStar 20240319 GSt 1.20.5 image, as per previous it writes to the memory but then doesn't start. I think the problem is on this decoder, so I would like to try it on another DM7020v2 with this image.

Meanwhile I tried Exteplayer3 updated to the latest version (also serviceapp updated to the latest version)

the video stream is perfect, but not the audio. With mpeg audio everything is fine, while with AAC sometimes it works and sometimes it doesn't.

At the moment I have not changed the default settings.

HDBITT on the other hand works perfectly.
(image OpenPli 12.3 custom build)

Display More

Here it works fine on my DM7020HDv2 that I bought to test the image before it's publication to confirm it was ok,

TS

Quote from service1

Unfortunately I have to say that I didn't make any changes to the image.

I doubt the problem is the receiver though. I bought this DM7020HDv2 for a few euros, to do some tests and to expand the points to the stream in the home network.

The receiver has two BCM4505 tuners that work partialy, do not execute diseqc commands well and do not receive all frequencies correctly.

I have not investigated whether it is a power supply problem on the motherboard or whether the previous owner damaged them for example by connecting live sources to the tuners themselves.

Anyway, I decided to leave the 2021 newnigma2 and use the OpenPli 12.3 custom build, a truly excellent job was done, congratulations to the developer.

I did this due to the presence of GStreamer 1.22.6 which, however, despite having installed all the additional components, the media player cannot correctly read the streams coming from the master dreambox, but instead correctly decode an HDBITT multicast encoder present into the network (see picture below).

I'll get another receiver in a few weeks and then I'll be back here.

B.R.

Screenshot 2024-04-22 212037.png

Display More

Use Exteplayer3... works MUCH better. Try this one below that has it built-in, as well as iCam and Dash IPTV,

TS

DM7020HDv2 : OpenPLi 8.xStar 20240319 GSt 1.20.5

openpli-enigma2-8xstar-dm7020hdv2

OpenPLi Release by OpenPLi Team, March 19th, 2024

- Python 3.9.9

- GStreamer 1.20.5

- FFMpeg 5.1.2 and Exteplayer3, ServiceApp (Dash Support)

- EPGImport Built-in

- AC3+/DDP/EAC3 support

- Feeds online (For Wifi/DVB-T Dongles)

- DVB-T USB, Trial Tuner, from JAM (Hauppauge, A867, etc)

- Wifi Realtek, Ralink, Mediatek Supported

- IPTV Support with Built-in

1300 Free To Air FREE IPTV Channels from their broadcaster

100+ VoD Free To Air Public Domain Movies and more coming soon (Charlot, Keaton, etc)

DM7020HD :

http://openpli8xstar.japhar.net/OpenPLi8xstar/openpli-enigma2-8xstar-dm7020hdv2.nfi

There is NO password,

TS

Quote from portinho

I have transfer channel list with dreamboxedit, but in this image happens what i say before.

When i install GigaBlue 800se : OpenPLi 8.0Star 20210720 1.18.3 works OK.

I have no issue with my channel lists, try latest DreamSet,... also check if your transfer doesn't fail (for example because you have not enough Flash memory available).

Also, after such channellist update, reboot your box.

TS

There is no passwords on openpli for telnet/ftp, and ssh you must set one if you want to use ssh,

You need to transfer the channel list with tools such as latest DreamSet (that supports streams) and DreamBoxEdit, with the correct parameters, all working good here. Otherwise, just do a scan of the satellites if it concerns the dvb channels.

TS

Quote from haldborg

recommends Blackhole

it is the best images you can find on the internet

kudos to those behind Blackhole

also tried opensimages it is also okay

DR1 and DR2 work fine

there are more options in Blackhole

it is a matter of taste what to use

all skins work in blackhole

use only these skins as made for this images

Display More

Blackhole and OpenTSimage is built by Fairbird, so it's same image/code/software.

TS

Quote from humaxdriver

Hi I have dmone but since mounth Alan Touring plugin from Gutemine panel not working Ghost Rider is apearing and not let me to install other images in multiboot . I installed clean fresh image from dreamboxupdate and newnigma2 on flash but same after installing Gutemine panel and Alan Turing ghost rider apear again ,can somebody help me how to make it work ? what should I do, which plugins should I install or uninstall from image to make Alan Touring to work normally ? Thanks I will apreceate your help.

Scrap anything related to Gutemine,... use the multiboot if you really want one, from OpenATV Team.

TS

iCam uses streamrelay (it takes control of Tuner), so the protocol icam is normally blocking the tuner... if you don't want it to happen, don't use iCam channels.

You need to understand that any provider you watch that is going thru iCam, will give you the same behavior, and any SoftCam that emulates iCam as well.

TS

Quote from johnvucz

Hello, after using a customize busquets for sky i saw that its IPTV Streamrelay and after switching back to tuner channels it says no free tuner and i have to swithc to another channel after that it works, also the channels are greyed out when im using iptv channels and want to go back to satelite cahnnels, how do i fix that? Im using Vuzero+ and blackhole image + OSCAM. Thank you

It's normal behavior if you use iCam, if you don't want to see this, don't use iCam,

TS

Quote from smoky

Some iptv streams were in hevc format... I could just get the audio but not the picture... Any fix to this?

Thanks.

HEVC=H265 = UHD = DM9x0/DreamOne/DreamTwo...

H264=HD = DM8000HD, DM800HD, DM800HDse, DM500HD, etc.

The DM8000 is NOT H265/HEVC/UHD, so you will never get a picture for that codec.

H265 is supported on UHD boxes (and DM52xHD, but low level only).

TS

Quote from smoky

I have just added an iptv list for testing...

On my pc very little interruptions using VLC player but through image it freezes after few seconds and have to change channel.

Is there a setting to fix this?

Thanks

Display More

Generally this is a problem of the IPTV provider/server, on VLC on PC, it should work perfectly.

TS