hey guys facing a little problem here I decided to update to 6.3 from 6.2 today because 6.3 is supported alot more, since updating I've lost all connection to my cable channels, I've checked to make sure the newcamd is the correct folders I just cant view any channels, soon as I revert back to 6.2 my channels come back on any idea as to why updating to 6.3 causes this issue?
News regarding PurE2 - updates, problems and so on...
-
- Latest News
- gorski
- Thread is marked as Resolved.
There are 837 replies in this Thread which was already clicked 75,980 times. The last Post () by electron112.
-
-
How about giving us the details of your setup? Perhaps we can help in that case...
-
i did try PLi-FullNightHD and pli full HD same problem
i didn't mention that my box went through boot (err ) problem Long ago and i fixed it by flashing the box with u-boot file ( spark 7111)
through the rs232 but it didnt effect on any other image i tried since then ( openatv gm990 / Openspa V5 Amiko 8900 / openesi-8.6-amiko8900 ...)
i hope anyone read this he has same box as i am ( golden media 990) could tell if he has same problem or not would be appreciate
Depending on your needs, Zgemma has cool and cheap boxes, like Broadcom based ones (H7) and HiSilicon (H9 Combo and Twin) SoCs.... ;)
-
my apologies I'm running this on a zgemma h7s what other info can help?
-
Strange, works fine in my case. Did you do backup of system settings from 6.2 and restore in 6.3 or a fresh start? Although, did never check mgcamd in 6.3... then again, oscamemu **should be** more than ok.
-
Better than MGcamD! As flawless as it can be, whereas MGcamD never was, in my experience...
-
I did both a fresh install and a update and restore none seemed to work
Your saying i should try oscam ? Where would I place the newcamd file if I was take this path?
-
Find OSCam EMu for PV in OSCam Emu section of this forum (my Sticky) and learn... It's simple, all is there...
-
Delfi:
- dm800se/500hd feeds updated
- 6.3 all feeds updated.
- for some yet unknown reason, osmio4* now has a swap partition (bloody not needed, unless I miss something:) ). To activate this surplus feature an USB reflash is needed.
- Netflix is updated for the relevant boxes.
- misc E2 fixes. -
Anybody have a problem with Kodi working on latest Pure2? I have 2 Zgemma’s, an H7S and an H9 Combo, and Kodi won’t load on Pure2 6.3 on either. Have done fresh flashes etc with no luck. It works on 6.2. I have friends running PurE2 6.3 on other boxes...Octagon, Amiko, etc...and Kodi seems to be fine.
-
FWIT, just in case somebody doesn't know this...
Any version in Zgemma H7/OEM 51 STBs has 2 modes: 1 and 12.
Mode 1 - Kodi works, PiP might not.
Mode 12 - PiP works, Kodi might not.
Mode 1:
V. 6.2 is OK, Kodi works
V. 6.3 - news just in: apparently Zgemma is testing new drivers and when it is all fine (probably Monday) they will publish the new SW.
I just saw new HD51 drivers for the same version, where Kodi is OK, allegedly.
As for the latest PurE2 v. 6.4 (testing phase, still...), our very own brew - we don't know as of now for sure when this will be available...
-
As for Kodi with PurE2 v. 6.3 in Twin/Combo: it works just fine! Something you have done must be wrong, sorry...
-
As for Kodi with PurE2 v. 6.3 in Twin/Combo: it works just fine! Something you have done must be wrong, sorry...
Thanks for the info on both boxes. Exciting if there will be an update from Zgemma for the H7. I'll reflash the Combo this weekend with the latest 6.3 and try running Kodi before installing any other plugins. See if that fixes it. Thanks again.
-
6.3 H7 Kodi ***could/should*** be ready next week. Still in testing phase. No need to test ti now as it fails. 6.2 is ok.
-
Actually, today drivers already in 6.3 image for Zgemma H7. So far all fine, Kodi works :)
-
OK, some E2iStream feedback, with my thanx to Codermik, once again!!! :thumbup:
Thanx to iStream/Codermik's link for compiling, E2iStream is now offered inside PurE2 > MENU > Plugins > green button > Extensions and it comes with almost everything that is required for it automatically installed, with only 3-4 additional files installed on first start. Do not worry if you can't update it, as it may be the latest version... Make sure you configure it so buffer and cache go to USB stick and downloading to HDD respectively.
If it isn't in PurE2 > MENU > Plugins > Extensions already, as in "after a SW update", please issue the following commands in PuTTy to get it:
opkg update
opkg upgrade
sync
reboot
Then, go to Plugins and install via remote controller...
Or manual install:
opkg install enigma2-plugin-extensions-e2istream
(latest version is 2019.10.24).
NOTA BENE - please, ignore the following error:
PurE2 - thanx to Delfi - now has FFmpeg 4.2.1 (the first in the world, as usual! :rasta2bigsmoke0gf1::hello ), so this test was doubly interesting to see what, if anything, would work with E2iStream, Kodi, Ciefp's channel list, incuding IPTV channels and some films, series etc. streaming (mkv, mp4 etc. links) etc. etc.
Prerequisites: Service App is installed and Exteplayer3 is active.
Results:
I.e. in E2iStream Exteplayer3 is not working with FFmpeg 4.2.1 but External gstplayer (no buffering needed most of the time) IS working, as you will see below! I tested lots of stuff and aplenty of those plugins offered are working just fine!
Here is my quick report to Delfi (just a few parts of our Skype conversation):
UK normal address - BBC iPlayer is working fully! ITV partially...
YouTube is cool:
With VPN active:
"Andrija & Andjelka" is working but with External Gstplayer
("Dom za vesanje" in Films is working! First time it stopped with ext gstplayer but then it worked!)
OK, in sports section some things are working...
"Our match", for instance.
"Red bull" is working in E2iStream.
"Laola" is working!
"TSiPlayer" has Bein etc.ESPN USA is opening... finally found valid links.... :P
Ha! "123Movies" is working inside TSiPlayer...
"Streamlord" is working there > "Joker" is going!
"Vidlink.org" in English section is working!
"Vumoo.to" is working.
Call me old-fashioned but these guys are active... ;)
"TSiPlayer" works in many places... ;)
"YIFY" inside E2iStream is working.
"18+" section (XXX) is working.
"Classic cinema" is working.
"Filmaon" is working.
"Filmativa.ws" is working!
"filmstreamhd.it" is working.
"Icefilms" seems OK, even.... :P I found "Flash" working...
"Movie4k.org" works!
"123Movies" works... Last 3 "kinda working" (fast test)...
And so on and on... Kodi is fine, too, hehe!
Codermik, again, thanx a bunch and keep up the good work!!! :)
-
Is there a way to get the Channel History to show EPG info in PurE2? It just displays the channel name, no program info, which can be problematic if you don't remember which channel you were on! lol
-
This is not problem of your image. The channel may not support or not send EPG. Install EPGImport plugin.
-
Checked on Zgemma H7 with PurE2 v. 6.2, 6.3 and 6.4.
Exteplayer in E2iStream is working in 6.2 and 6.3.
But not in 6.4, which has FFmpeg 4.2.1 - the latest version of FFMpeg only PurE2 has, so we must wait 'till that is sorted out on E2iPlayer/E2iSTream side...
-
mmm, where to download 6.4 ?
PurE2 Team Images Support Forum ~ based on OE-Alliance
PurE2 Supported Models ~
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!