Yeah, install PurE2, then it will have only the specific plugins in its feeds - not an "all round one" - and it should open whatever can be opened at the moment...
That is, IF your box can open it, which I do not know...
Yeah, install PurE2, then it will have only the specific plugins in its feeds - not an "all round one" - and it should open whatever can be opened at the moment...
That is, IF your box can open it, which I do not know...
Ok I will try
thanks
Display MoreHi gorski can you help me please,
I have a problem that I try hard to resolve but I cant.
I do have a DM800SE (Clone sim 2.1) with this image openpli-9.3-sim2.1-dm800se_20200524 and this Oscam enigma2-softcams-oscam-all-images_11.579-emu-r798-arm+mips_all,
I do open some Powervu Channels with emu but can open the Disc***** Networks on the Astra 4 (4,8 E) all the others on the same satellite on Powervu no problem.
I do have the same Oscam on the DM900 4K enigma2 image and works ok
what am i doing wrong on the DM800HD SE :unhappy:
The config file,
CodeDisplay More[global] logfile = /tmp/oscam.log #logfile = stdout nice = -1 maxlogsize = 1024 waitforcards_extra_delay = 100 preferlocalcards = 1 readerrestartseconds = 3 block_same_ip = 0 block_same_name = 0 ecmfmt = P: c:p:s:d:i: #ECM_L:l #CW=w HOP:j disablecrccws_only_for = 098C:000000;09C4:000000;098D:000000;0500:030B00,032830,041950,042800,042820,050F00,051A00;1811:003311,003315;1819:00006D;1884:000000 disablecrccws = 1 [cs378x] port = 13001 suppresscmd08 = 1 [newcamd] port = 12121@0000 key = 0102030405060708091011121314 mgclient = 1 [cccam] port = 12000 nodeid = 24D5EF28108C14E0 version = 2.3.0 reshare = 0 #reshare_mode = 0 #stealth = 1 [streamrelay] stream_relay_enabled = 0 [dvbapi] enabled = 1 au = 1 pmt_mode = 0 delayer = 60 ecminfo_type = 1 user = dreamosat read_sdt = 1 write_sdt_prov = 1 extended_cw_api = 2 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ] boxtype = dreambox [webif] httpport = 8888 httprefresh = 10 httpallowed = 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1 httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255 Display More
My Oscam.server
CodeDisplay More[reader] label = xxxxxxxxxxx enable = 1 protocol = cccam device = xxxxxxxxxxx user = xxxxxxxxxxx password = xxxxxxxxxxx services = !powervu_fake,!tandberg_fake,!biss_fake,!afn_fake inactivitytimeout = 30 disablecrccws_only_for = 098C:000000;09C4:000000;098D:000000;0500:030B00,032830,041950,042800,042820,050F00,051A00;1811:003311,003315;1819:00006D;1884:000000 group = 1 emmcache = 1,1,3,1 dropbadcws = 1 disablecrccws = 1 cccversion = 2.1.2 ccckeepalive = 1 cccreshare = 0 [reader] label = xxxxxxxxxxxx protocol = cccam device = xxxxxxxxxxxx user = xxxxxxxxxxxx password = xxxxxxxxxxxx services = !powervu_fake,!tandberg_fake,!biss_fake,!afn_fake inactivitytimeout = 30 disablecrccws_only_for = 098C:000000;09C4:000000;098D:000000;0500:030B00,032830,041950,042800,042820,050F00,051A00;1811:003311,003315;1819:00006D;1884:000000 group = 1 emmcache = 1,1,3,1 dropbadcws = 1 disablecrccws = 1 cccversion = 2.1.2 ccckeepalive = 1 cccreshare = 0 [reader] label = xxxxxxxxxxx protocol = cccam device = xxxxxxxxxxx user = xxxxxxxxxxx password = xxxxxxxxxxx services = !powervu_fake,!tandberg_fake,!biss_fake,!afn_fake inactivitytimeout = 30 disablecrccws_only_for = 098C:000000;09C4:000000;098D:000000;0500:030B00,032830,041950,042800,042820,050F00,051A00;1811:003311,003315;1819:00006D;1884:000000 group = 1 emmcache = 1,1,3,1 dropbadcws = 1 disablecrccws = 1 cccversion = 2.1.2 ccckeepalive = 1 cccreshare = 0 [reader] label = constant.cw enable = 0 protocol = constcw device = /etc/tuxbox/config/constant.cw caid = 2600,0B00,0B02,0500,0963,06AD,0940 group = 1 [reader] label = emulator protocol = emu device = emulator disablecrccws_only_for = 0E00:000000 caid = 0500,0604,0E00,1010,1801,2600,2602,2610 detect = cd ident = 0500:000000,007400,007800,021110,023800;0604:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000 group = 1 emmcache = 2,1,2,1 emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000
Can any one give me an help to resolve this,
Best Regards
:thumbup:
Ok I will try
thanks
Hi guys fixed wrong Softcam.Key
Thanks for the help
goodmorning, when can i find the config file for oscam at edition os mio 4k
When? Now. If only you read this thread a bit....
I am totally lost here,checked my line info and I have 3 different ones that I use on openbox so how do I get this info into my hd61 with pure
Let me answer with a little actual story...
I was once asked to paint a brick wall, as a part of my job routine and I have never painted in my life...
Bewildered, I turned to a colleague, who was asked to do the same - and who looked like he did this before - and asked "how do you do this"?
He smiled and looked at me, with some understanding, then said: "Brick by brick".
Never have I been taught a quick and more useful lesson in such a benevolent manner. Patience, step-by-step. You will get there in the end, even if it looks a bit overwhelming right now. One foot before the other, you will learn and get better at it...
Read and do as you read. My posts are very detailed and they will guide you to success. Then you will know what to do and you will be able to help others, too...
So, go back to the beginning of this thread, read my posts and do as you read, step-by-step....
Good luck!
sorry my fault I thought it was a support and help forum,I have gone through step by step and tbh not clear to me at all.
I guess pure2 isn’t for me after all,maybe I should have gone zgemma box and got the wooshbuild as support and help was endless on that build,once I done one box it was a doddle to sort
finally worked out how I can access the box via the laptop using FileZilla and sent my oscamserver file to the box not sure how the details enter tho as I have 3 different lines from my euro sat supplier I get it in the following format so not 100% sure what goes where
C: Xxxxxxxx.xxxxxx.xx 55555 bloggs joe
C: Xxxxxxxx.xxxxxx.xx 44444 bloggs joe
C: xxxxxxxx.xxxxxx.xx 33333 bloggs joe
put your data in where xxxx is
[reader]
label=Xxxxxxxx.xxxxxx.xx
enable=1
protocol=cccam
device=Xxxxxxxx.xxxxxx.xx,55555
user=bloggs
password=joe
cccversion=2.1.2
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccmaxhops=10
ccckeepalive=1
cccwantemu=0
[reader]
label=Xxxxxxxx.xxxxxx.xx
enable=1
protocol=cccam
device=Xxxxxxxx.xxxxxx.xx,44444
user=bloggs
password=joe
cccversion=2.1.2
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccmaxhops=10
ccckeepalive=1
[reader]
label=xxxxxxxx.xxxxxx.xx
enable=1
protocol=cccam
device=xxxxxxxx.xxxxxx.xx,33333
user=bloggs
password=joe
cccversion=2.1.2
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccmaxhops=10
ccckeepalive=1
Done that but not clearing the channels tho,something must be wrong somewhere
what to do is described from post # 1 to post # 51, please read
gone through this secton dont no how many tmes and something just isnt rght,been in touch wth my supplier got details ect
i am getting cannot find emu info on the epg guide?
left it a while as it does state could take 5 minutes to clear but been over 10 and still no joy at all,connected my open box up and lines are working fine
If works well in openbox, why you not copy these lines, and add in oscam.server in other box . Did you add well and properly
your lines as is suggested @teak-won-do in post #51. Somethings is not good or "missing". Try to check again.
because he dont know how to enable OSCAM
because he dont know how to enable OSCAM
but he can read, i hope. all information is here in posting us i wrote already
been telling him through PM
im lost
hes got no idea how to
openbox and Zgemma are a million miles apart
i gave up
i allways thought u could train an old dog a new trick
i found out
you can't
Don’t have an account yet? Register yourself now and be a part of our community!