Stored Position Tuner Setup

Discussion of article Stored Position Tuner Setup:

Quote

This guide sets up stored satellite positions on a motorised dish using DiSEqC 1.2 — first configuring the tuner and satellite (Stage 1), then using the satfinder and positioner to physically move the motor and store each position (Stage 2). You'll repeat both stages once per satellite you want the motor to remember.
Stage 1: Configure the tuner and satellite
Go to Main Menu \ Setup \ Service Searching \ Tuning and press OK on TUNER A.
http://img338.imageshack.us/my.php?image=40440488.png
Use…

Discussion of article Stored Position Tuner Setup:

Quote

STAGE 1. GOTO Main Menu \ Setup \ Service Searching \ TuningPress "OK" on "TUNER A" Use L/R keys to change Configuration Mode to "advanced"Move down to "SATELLITE"Use L/R keys to select the satellite you want to add Go down to "LNB"Use L/R keys to select "LNB 1"Next ensure "Diseqc Mode" is " 1.2"(I left the others at the default setting's)Scroll further down to "LOF" and set it to "Universal LNB" using the L/R keys Underneath that set "Use USALS" for this satellite to "no" using L/R…