Latest NCam Emu for ALL IPK & sh4 spark v15.7 compiled and patched by RAED

Thanks fairbird
Ncam 11.4 compiled and patched READ as at 31/10/2020

The ncam support now just some sites which give free c: line (Beta Test)

So You can find it inside /etc/tuxbox/config/CCcam.cfg file

All sites are disable (default settings) If you Enable and site just remove # from the beginning of the line the restart ncam

                                                    -New (Exclusive) feature on Ncam                
                                                                *(Searching, Fetching, Reading and running Free C: line server from net)                                                                                -Small fix for (lg) detection                                                                                    -Fixed unode_id (...)                
                                                            -Fix prevent buffer overflow                            
                                                                -Fix cl->reader->cacheex.maxhop_lg > max never used                                                                                -Need PIN on 092F and 091F caid's fixe
                                                                                    -Updated aio
                                                                                                -patch for common bugs reported by scan-build
                                                                                    -fix typos move debug logoutput to debug                            
                                                                -small fix for ecm-whitelist
                                                                                        -Updated: Android stapi, CW type
                                
                                                                -small correction (do not have the same user and pass)                            

Note the following

Installing the emu in the old way by uploading it to the Extension / var supply and running it by plugin alternative softcam manager Suitable for old versions only

But modern versions must Installing through ipk extension

IPK  for MIPS Valid for devices spark SH4 for enigma2

In ncam.conf

pmt_mode = 0 #[ Use 6 the Best value for (opensource) images only ]

extended_cw_api = 1 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ] boxtype

= dreambox #[ For enigma2 use (dreambox) And spark and neutrino use (duckbox) ]

config_ SH4-Only for spark and neutrino

Ncam-config_ for enigma2

Thanks fairbird

Enjoy & Good luck

Thanks fairbird

Update ...
Ncam 11.5 compiled and patched READ as at 03/11/2020

Code

1. -A lot of Fixes
2. -Change CCcam.cfg free server (You need to update CCcam.cfg) New config file from first post

Now the Free servers name inside CCcam.cfg Should be like this

Code

1. #SERVER1
2. #SERVER2
3. #SERVER3
4. #SERVER4
5. #SERVER5
6. #SERVER6

Note the following

Installing the emu in the old way by uploading it to the Extension / var supply and running it by plugin alternative softcam manager Suitable for old versions only

But modern versions must Installing through ipk extension

IPK  for MIPS Valid for devices spark SH4 for enigma2

In ncam.conf

pmt_mode = 0 #[ Use 6 the Best value for (opensource) images only ]

extended_cw_api = 1 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ] boxtype

= dreambox #[ For enigma2 use (dreambox) And spark and neutrino use (duckbox) ]

config_ SH4-Only for spark and neutrino

Ncam-config_ for enigma2

Thanks fairbird

Enjoy & Good luck

Thanks fairbird

Update ...
Ncam 11.6 compiled and patched READ as at 24/11/2020

Code

1. -Fix some bugs
2. -Update/Add some Free seever sites
3. -Now ncam can be downlaod and read softcam.key direct from net (see ncam.server)
4. -Add New file ncam.fs for free server works same as CCcam.cfg
5. (All Free Servers you can enable/disable from ncam.fs, And CCCam.cfg keep it for the private buy C Lines)

Note the following

Installing the emu in the old way by uploading it to the Extension / var supply and running it by plugin alternative softcam manager Suitable for old versions only

But modern versions must Installing through ipk extension

IPK  for MIPS Valid for devices spark SH4 for enigma2

In ncam.conf

pmt_mode = 0 #[ Use 6 the Best value for (opensource) images only ]

extended_cw_api = 1 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ] boxtype

= dreambox #[ For enigma2 use (dreambox) And spark and neutrino use (duckbox) ]

config_ SH4-Only for spark and neutrino

Ncam-config_ for enigma2

Thanks fairbird

Enjoy & Good luck

Thanks fairbird

Update ...
Ncam 11.7 compiled and patched READ as at 22/2/2021

Code

1. -Update URL for Free Servers
2. -[powervu] Fixed emm algo
3. -Add emu BISS2 (Best Test)
4. -repeat to ask all gbox readers again during fallback time (Thank's chimpie232)
5. -Fix: read the SoftCam.Key file in the url and the SoftCam.Key file in the configuration folder
6. -Fix: cccam cfg path
7. -Add TotalTV Serbia (0911) ATR to reader-videoguard-common
8. -Adding CAID 0961 & CAID 09BB Sky Uk and Airtel India

Note the following

Installing the emu in the old way by uploading it to the Extension / var supply and running it by plugin alternative softcam manager Suitable for old versions only

But modern versions must Installing through ipk extension

IPK   Valid for devices spark SH4 for enigma2

In ncam.conf

pmt_mode = 0 #[ Use 6 the Best value for (opensource) images only ]

extended_cw_api = 1 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ] boxtype

= dreambox #[ For enigma2 use (dreambox) And spark and neutrino use (duckbox) ]

config_ SH4-Only for spark and neutrino

Ncam-config_ for enigma2

Thanks fairbird

Enjoy & Good luck

Quote from ghibli1969

is it also good for ARM?

Ncam-Images-IPK (For All devices that use ipk system)

Thanks fairbird

Update ...
Ncam 11.8 compiled and patched READ as at 25/3/2021

:

-update URL (25.02.2021)"
-Fixed SoftCam.Key (url) cut file name"
-fixind srvid on Radegast Module by Adding srvid because ECM contains0000"
-webif-cacheex-client.reader-description-fix v1"
(add else conditions)"
-[biss] Changed tsid-onid combo validation"
-[gbx] - add dynamic card update/exchange"
* rearrange hello scheme
* add peer specific ccc reshare ident filter
* fix major bug in send hello msg
* correct checkcode calculation
* change some default settings
* add optional send msg Here? to selected peers"
-Fix need pin for 0961"
(reader) 0961_sky [videoguard2] classD3 ins54: no cw --> Card needs pin)"
-[dvbapi] Updated extension descriptor tags"
(In accordance with ETSI EN 300 468 V1.16.1, table 109.)"
-[powervu] Added some missing hash modes"
-[streamserver] Synced extension descriptor tags with the dvbapi code"

Note the following

Installing the emu in the old way by uploading it to the Extension / var supply and running it by plugin alternative softcam manager Suitable for old versions only

But modern versions must Installing through ipk extension

IPK   Valid for devices spark SH4 for enigma2

In ncam.conf

pmt_mode = 0 #[ Use 6 the Best value for (opensource) images only ]

extended_cw_api = 1 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ] boxtype

= dreambox #[ For enigma2 use (dreambox) And spark and neutrino use (duckbox) ]

config_ SH4-Only for spark and neutrino

Ncam-config_ for enigma2

Thanks fairbird

Enjoy & Good luck

Ncam 11.8 +Supcam +REvcam 4/4/2021 by linuxsat25 for all & sh4

Thanks Linuxsat25

Enjoy & Good luck

Thanks fairbird

Update ...
Ncam 11.9 compiled and patched READ as at 5/04/2021

Code

1. -Fix compile error (undefined-reference-to-'_binary_SoftCam_Key_start')
2. -powervu sharing is blocked (Not Services)
3. (Add this reader into the ncam.services file)
4. *My Config files updated already (no need to add it again)
5. *After this fix should be Ncam read powervu and update keys direct from softcam,key no need to read it from (ncam.fs or CCcam.cfg). So more fast to update keys
6. ...
7. [emulator]
8. caid = 0E00
9. provid =
10. srvid =
11. ...
12. -dvbapi FBC Tuner fix (oscam@11691)

Note the following

Installing the emu in the old way by uploading it to the Extension / var supply and running it by plugin alternative softcam manager Suitable for old versions only

But modern versions must Installing through ipk extension

IPK   Valid for devices spark SH4 for enigma2

In ncam.conf

pmt_mode = 0 #[ Use 6 the Best value for (opensource) images only ]

extended_cw_api = 1 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ] boxtype

= dreambox #[ For enigma2 use (dreambox) And spark and neutrino use (duckbox) ]

config_ SH4-Only for spark and neutrino

Ncam-config_ for enigma2

Thanks fairbird

Enjoy & Good luck

Thanks fairbird

Update ...

Powervu Sharing is blocked (Not Services)

If you do not use the attached Config modified settings in In the former post

Paste Add this reader into the ncam.services file:
[emulator]

caid = 0E00

provid =

srvid =

Enjoy & Good luck

Thanks fairbird

Update ...

Enjoy & Good luck

Thanks fairbird

Update ...

Enjoy & Good luck

Thanks fairbird

Update ...
Ncam 12.0 compiled and patched READ as at 6/10/2021

Code

1. -Update some Free servers url
2. -Camd35 src-data is frees
3. -fix webif aio proto
4. -[gbx] - enhance 'ignore peer' feature
5. -*thx to @chimpie232 for providing the patch
6. *improve ccc reshare
7. *code cosmetic
8. -[nagra] Tivusat Silver Rainbow - Show Entitlements thx opti

Note the following

Installing the emu in the old way by uploading it to the Extension / var supply and running it by plugin alternative softcam manager Suitable for old versions only

But modern versions must Installing through ipk extension

IPK   Valid for devices spark SH4 for enigma2

In ncam.conf

pmt_mode = 0 #[ Use 6 the Best value for (opensource) images only ]

extended_cw_api = 1 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ] boxtype

= dreambox #[ For enigma2 use (dreambox) And spark and neutrino use (duckbox) ]

config_ SH4-Only for spark and neutrino

Ncam-config_ for enigma2

Thanks fairbird

Enjoy & Good luck

Thanks fairbird

Ncam V12.2 compiled and patched READ as at 8/10/2021

Ncam V12.1

Code

1. -Remove libcurl4 from ncam

Ncam V12.2

Code

1. -Add libcurl4 to ncam compile
2. -Upgrade curl version to 7.79.1

Note the following

Installing the emu in the old way by uploading it to the Extension / var supply and running it by plugin alternative softcam manager Suitable for old versions only

But modern versions must Installing through ipk extension

IPK   Valid for devices spark SH4 for enigma2

In ncam.conf

pmt_mode = 0 #[ Use 6 the Best value for (opensource) images only ]

extended_cw_api = 1 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ] boxtype

= dreambox #[ For enigma2 use (dreambox) And spark and neutrino use (duckbox) ]

config_ SH4-Only for spark and neutrino

Ncam-config_ for enigma2

Thanks fairbird

Enjoy & Good luck

Thanks fairbird

Ncam V12.2 compiled and patched READ as at 12/10/2021

bin files were missing in ipk and deb . file

file ipk correction

Ncam V12.1

Code

1. -Remove libcurl4 from ncam

Ncam V12.2

Code

1. -Add libcurl4 to ncam compile
2. -Upgrade curl version to 7.79.1

Note the following

Installing the emu in the old way by uploading it to the Extension / var supply and running it by plugin alternative softcam manager Suitable for old versions only

But modern versions must Installing through ipk extension

IPK   Valid for devices spark SH4 for enigma2

In ncam.conf

pmt_mode = 0 #[ Use 6 the Best value for (opensource) images only ]

extended_cw_api = 1 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ] boxtype

= dreambox #[ For enigma2 use (dreambox) And spark and neutrino use (duckbox) ]

config_ SH4-Only for spark and neutrino

Ncam-config_ for enigma2

Thanks fairbird

Enjoy & Good luck

Thanks fairbird

Ncam V12.3 compiled and patched READ as at 17/10/2021

Ncam V12.3

-CMake - Update minimum required version
(trac.streamboard.tv/oscam/changeset/11698)
-Fix some GCC 11 warnings
-(trac.streamboard.tv/oscam/changeset/11699)
-Fix some typos and cosmetics
-(trac.streamboard.tv/oscam/changeset/11700)

Note the following

Installing the emu in the old way by uploading it to the Extension / var supply and running it by plugin alternative softcam manager Suitable for old versions only

But modern versions must Installing through ipk extension

IPK   Valid for devices spark SH4 for enigma2

In ncam.conf

pmt_mode = 0 #[ Use 6 the Best value for (opensource) images only ]

extended_cw_api = 1 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ] boxtype

= dreambox #[ For enigma2 use (dreambox) And spark and neutrino use (duckbox) ]

config_ SH4-Only for spark and neutrino

Ncam-config_ for enigma2

Thanks fairbird

Enjoy & Good luck

Quote from AHMED LEILA

is there an apk file for android 7 non stapi (magicsee400)

This topic is for Spark devices, search here

Ncam Emu compiled and patched by READ

Enjoy & Good luck

Thanks fairbird

Ncam V12.4 compiled and patched READ as at 26/10/2021

Ncam V12.4

Code

1. -Fix read Biss keys from Softcam.key

Note the following

Installing the emu in the old way by uploading it to the Extension / var supply and running it by plugin alternative softcam manager Suitable for old versions only

But modern versions must Installing through ipk extension

IPK   Valid for devices spark SH4 for enigma2

In ncam.conf

pmt_mode = 0 #[ Use 6 the Best value for (opensource) images only ]

extended_cw_api = 1 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ] boxtype

= dreambox #[ For enigma2 use (dreambox) And spark and neutrino use (duckbox) ]

config_ SH4-Only for spark and neutrino

 Ncam-config-OE2.0 for enigma2

Thanks fairbird

Enjoy & Good luck