![](https://www.linuxsat-support.com/cms/images/avatars/e0/6247-e0470c50fea138db0ef8c25fc21f44937f488fd1.png)
FreeServer Enigma2 Plugin by Mino60 - v8.3.8 py2 py3
-
- FreeServer
- ahmed gazye
- Thread is marked as Resolved.
There are 3,573 replies in this Thread which was already clicked 1,509,605 times. The last Post () by Clement Chiwaya.
-
-
It does not work I had previously tried.
If you don't know the folder to make the changes, it will be difficult to solve.
Who can help us
Thank you
C'è qualcuno che mi può aiutare.
Vorrei fare in modo che nell'aggiornare la CCcam con le nuove Cline partisse da una CCcam.cfg di base predeterminata.
Dove la trovo?
There is someone who can help me.
I would like to make sure that when updating the CCcam with the new Clines it started from a predetermined basic CCcam.cfg.
Where can I find it?
Forse ho trovato già la soluzione. Bisogna modificare il file CCcam.cfg che si trova in :
\usr\lib\enigma2\python\Plugins\Extensions\FreeServer\config
Qualcuno può darmi una conferma?
It does not work I had previously tried.
If you don't know the folder to make the changes, it will be difficult to solve.
Who can help us
Thank you
-
It does not work I had previously tried.
If you don't know the folder to make the changes, it will be difficult to solve.
Who can help us
Thank you
C'è qualcuno che mi può aiutare.
Vorrei fare in modo che nell'aggiornare la CCcam con le nuove Cline partisse da una CCcam.cfg di base predeterminata.
Dove la trovo?
There is someone who can help me.
I would like to make sure that when updating the CCcam with the new Clines it started from a predetermined basic CCcam.cfg.
Where can I find it?
Forse ho trovato già la soluzione. Bisogna modificare il file CCcam.cfg che si trova in :
\usr\lib\enigma2\python\Plugins\Extensions\FreeServer\config
Qualcuno può darmi una conferma?
It does not work I had previously tried.
If you don't know the folder to make the changes, it will be difficult to solve.
Who can help us
Thank you
With this plugin your CCcam.cfg will always be overwritten in /etc so I think you'd better have another cam (oscam or else) where you'll put your line
Questo plugin ti sovrascriverà sempre la CCcam.cfg con la tua linea in /etc , credo sia meglio per te installare in aggiunta un'altra cam (oscam o altro) dove puoi mettere la tua linea ...e cambiare quando ne hai bisogno
-
It does not work I had previously tried.
If you don't know the folder to make the changes, it will be difficult to solve.
Who can help us
Thank you
C'è qualcuno che mi può aiutare.
Vorrei fare in modo che nell'aggiornare la CCcam con le nuove Cline partisse da una CCcam.cfg di base predeterminata.
Dove la trovo?
There is someone who can help me.
I would like to make sure that when updating the CCcam with the new Clines it started from a predetermined basic CCcam.cfg.
Where can I find it?
Forse ho trovato già la soluzione. Bisogna modificare il file CCcam.cfg che si trova in :
\usr\lib\enigma2\python\Plugins\Extensions\FreeServer\config
Qualcuno può darmi una conferma?
It does not work I had previously tried.
If you don't know the folder to make the changes, it will be difficult to solve.
Who can help us
Thank you
With this plugin your CCcam.cfg will always be overwritten in /etc so I think you'd better have another cam (oscam or else) where you'll put your line
Questo plugin ti sovrascriverà sempre la CCcam.cfg con la tua linea in /etc , credo sia meglio per te installare in aggiunta un'altra cam (oscam o altro) dove puoi mettere la tua linea ...e cambiare quando ne hai bisogno
I thank you for the answer.
My problem is that in the main decoder, H9 combo, I also have a TV Sat card that I need to see the 4K channels and the other channels when the program doesn't work.
With modified cccam I send the signal to another decoder, H2H, to watch the tvsat channels and it works.
When I reload Freeserver it overwrites cccam and I have to change it every time. As asked by another user, if I knew the folder and the basic file of Cccam, where the program then adds the servers, I could modify it so in the replacement the modification would remain.
It is possible
Thank you
-
Why do I keep getting this error: login failed, usr/pwd invalid?
Thanks
-
Hi ,
are there problems with downloading the freeserva ??
I am getting this errors all other server are ok
have vu+ solo2 freeserver 7.02
thanks
-
Why do I keep getting this error: login failed, usr/pwd invalid?
Thanks
When you open Webif you will notice that many servers do not work. All these servers change usr/pwd several times a day.
These error means that you need a new one user/password for cline.
-
Hi ,
are there problems with downloading the freeserva ??
I am getting this errors all other server are ok
have vu+ solo2 freeserver 7.02
thanks
This is not problem with downloading. Some servers ( or most ) they never work, but are on the list.
-
thanks for the info ,
here is one other thing I trying to do , I am looking to run more then 1 auto update in the timer.txt I tried to put more the 1 time in , at the moment 08:00 but it doesn't work , I do not know the syntax also if you know what are the " Cronies " can I run those autoupdate via Cron? also checked some *.py but could find anything about it
thanks for any advice
-
-
Hi guys.Just a question.Every time I use FreeServer,my reader is deleted (card, and softcam.key)Hw can i fix it?Tnx in advance
-
Hi guys.Just a question.Every time I use FreeServer,my reader is deleted (card, and softcam.key)Hw can i fix it?Tnx in advanceThe easiuer
The easier is to use a cam for your line and another one for freeserver (ex: Oscam-Stable and Oscam-Emu) or it will always be overwritten
-
Hi guys.Just a question.Every time I use FreeServer,my reader is deleted (card, and softcam.key)Hw can i fix it?Tnx in advanceThe easiuer
The easier is to use a cam for your line and another one for freeserver (ex: Oscam-Stable and Oscam-Emu) or it will always be overwritten
Many tnx m8😉
-
Hello. Freeserver dont work in openpli7.2 with my decore ocragon enigma 2. No oscam or cccam ipk installation
-
Do you get a message that it needs to be installed, or missing some pythons after installing ipk file?
-
installation is ok. freeserver generates ok the files. but freeserver cannot install oscam in openpli 7.2.
i installed oscam from openpli iamge but oscam installed in a folder oscam stable not in the directory where freeserver generates the files.
-
Maybe you should install oscam-emu, not a oscam stable, or press blue button on freeserver (Menu), and install Last Oscam/Ncam update IPK/DEB .
-
installation is ok. freeserver generates ok the files. but freeserver cannot install oscam in openpli 7.2.
i installed oscam from openpli iamge but oscam installed in a folder oscam stable not in the directory where freeserver generates the files.
You'll have to copy manually "oscam.server" from the directory (/etc/tuxbox/config) to the OscamStable folder wherever it is.
-
for all who use personal cards and clines to avoid that at every start of the freeserver plugin then they must then manually add the data in cccam.cfg if they use cccam or in ecd / tuxbox / emu / if they use oscam or ncam or other emus
two methods can be used
the first and edit the free server.sh file located at / usr / lib / enigma2 / python / Plugins / Extensions / FreeServer
like this if you use cccam:
create a ccam file in .txt format register on https://archive.org/
create my own library and load the cccam.txt by writing down the link
with zilla client or dcc e2 programs enter the box open following the path indicated above the file freeserver.sh
go to line 23 and change:
HTTPSERV1 = "http://ia601509.us.archive.org/5/items/dreamosat/CCCAM.txt"
with the new path es:
HTTPSERV1 = "http: //ia............us.archive.org/../items/miofile /CCCAM.txt"
to save
for those who use ncam and oscam the procedure and the same only the lines to be modified are 683 for ncam and 641 for oscam
or you can upload the txt oscam or ncam files with your data to the archive library
another method and create a script
with the command cat
every time you start the freeserver, immediately start the script with cat
which joins your .txt files that you created with the cccam.cgf or with ncam.server or oscam, server
es
cd file path
cat mio.txt >> ccam.cfg (or ncam.server)
-
installation is ok. freeserver generates ok the files. but freeserver cannot install oscam in openpli 7.2.
i installed oscam from openpli iamge but oscam installed in a folder oscam stable not in the directory where freeserver generates the files.
You'll have to copy manually "oscam.server" from the directory (/etc/tuxbox/config) to the OscamStable folder wherever it is.
its boring doing it every day , i need freserver to do it automatically
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!