MultiCS r82 by hellboy - All Versions

not release for vu zero 4k older box dm800se have compatible with r82

MultiCS r82-hellboy-V30

## r82-hellboy-V30

- [FIX] Solved BIG memory leak in web interface (upgrade recommended)
- [FIX] Show correct CACHE TIMEOUT of each profile in the show config page
- [ENH] Add country flags to source ip address on failban page. Source ip address is now clickable and you can go to What Is My IP Address? IP Address Tools and More directly to get more information on that IP
- [ENH] Add button to close all open alerts
- [ENH] Generate alerts for more situations related to bad authentication of users when it's available for the specific cs protocol:
* Good username but bad password
* Multiple connections, with indication of the following cases:
+ Multiple connections in more that 60 seconds (Already connected)
+ Multiple connections in less that 60 seconds (Just connected)
+ Multiple connections from different IP
* This information was already in the logs of multics. We are only adding it to alerts so people that never look logs can take care of it.
- [ENH] New feature to add cccam and mgcamd users from web interface. To enable it modify the INCLUDE of the file that will hold the new users like the following:
// File that will hold the users
INCLUDE: "/var/etc/users.cfg", USERFILE
New users will be added at the end of the defined USERFILE.
Only one USERFILE definition can be used.
Once enabled the web interface will show a new form in the CCCAM and MGCAMD pages to allow adding new users.
Only username and password, no more is included in the web interface. If you need to add other things to the users you use the normal editor.
- [ENH] Allow disable/enable cacheex clients and servers from cacheex page on web interface
- [ENH] Include HTTPALLOWEDIP and HTTPALLOWEDHOST parameters in configuration to restrict http web interface access to specific sources.
* All sources not included here will not have access to http web interface.
* If none of this new parameters HTTPALLOWEDIP and HTTPALLOWEDHOST is defined source access control will be disabled.
* HTTPALLOWEDIP will hold a comma separated list of IP addresses or IP ranges like in these examples:
HTTPALLOWEDIP: 127.127.127.127, 127.0.0.1-127.0.0.255
HTTPALLOWEDIP: 0.0.0.0-255.255.255.255 ### This would be equivalent to disabling access control
* HTTPALLOWEDHOST will hold a comma separated list of hostnames. Your server SHOULD be able to DNS resolve those hostnames.
* There's a proccess inside multics that tries resolve those hostnames at certain intervals, but it's not running continuosly. So when multics starts allow sometime (at least one minute) for this process to execute and when the DNS is updated (dynamic DNS) allow also at least one minute too plus the DNS propagation time that is out of multics control.
* Example of HTTPALLOWEDHOST:
HTTPALLOWEDHOST: yourwork.no-ip.org, yourhouse.no-ip.org* Note that there's no single (') or double (") quotes for hostnames and for IP address. You'll get an error if you use them.

* Note that spaces are not allowed inside IP ranges.
- [ENH] Include NOIPFAILBAN and NOHOSTFAILBAN parameters in configuration to allow specifiying sources that won't be included in failban.
* If none of this new parameters NOIPFAILBAN and NOHOSTFAILBAN there will be no exceptions for failban.
* 127.0.0.1 ip address will be added if not included in the configuration.
* Syntax is equivalent to HTTPALLOWEDIP and HTTPALLOWEDHOST.

Download: https://www.mediafire.com/file…a2cp/hellboy-V30.zip/file

Quote

Code

## Changelog
## r82-hellboy-V32

## r82-hellboy-V31
- [ENH] Compute the worst profiles in three cases: worst profile in cache, worst profile in cacheex and worst profile in servers - [FIX] Fixed SMS Message from cache page, will not refresh the content till you focused in textbox (beware: if you focus out and you wrote a big text it will be deleted so stay focused till you send the message). - [ENH] Show link to whatismyipaddress.com in failban page for source addresses in case there's no ip2country file configured in multics.
- [SEC] Don't send referrer to whatismyipaddress.com when clicking on links to that site (security)
- [SEC] Don't send referrer to when clicking on link to mutics.club site in index page (security)
- [FIX] Solve BUS ERROR message on arm-dream binary 

if your using multics hellboy

on an ARM box please update to this version

r82-hellboy-V32

- [ENH] Show CPU usage average for multics process in index page (using ps -p <PID> -o %cpu)

- [ENH] Show different colors for last used share depending on where did the CW came from:

CW from CACHE -> "#0d98ba"; // blue-green

CW from SERVER -> "#3300aa"; // blue special

CW from NEWCAMD/MGCAMD CLIENT -> "#ffae42"; // yellow-orange

CW from CACHEEX -> "#9acd32"; // yellow-green

- [ENH] Add hyperlink to IP information for remote clients and servers. The hyperlink is on the IP address string. The change is added in the following pages:

+ Cache

+ Cacheex

+ Servers: it means also separating hosts and IP address in two different columns so that each of them have their own link (to server detail page and to ip information respectively)

+ Newcamd

+ Mgcamd

+ Cs378x

+ Camd35

+ Cccam

please help

Error in Profile [ADD 0604] ! Nagravision,Irdeto,Conax,Videoguard(NDS),Bulcrypt other else PROVID 000000 is invalid !

Why long time not release multics hellboy r82 v33 ?

have problem failban in v32

iptables V1.6.2 installed enigma2 vusolo 2

ERROR - Error: Cannot run IPTABLES, FAILBAN could not started!

any sugestions ?

Quote from hbm2010

please help

Error in Profile [ADD 0604] ! Nagravision,Irdeto,Conax,Videoguard(NDS),Bulcrypt other else PROVID 000000 is invalid !

[ART - 0604]

===============================================

PORT: +

ONID: 0800

CAID: 0604

PROVIDERS: 000000

SID LIST: 02BF 02C1 02C2 02C4 02C5

==============================================

to add to above post

NOTE: this version of multics will not let you start with invalid PROFILES!

Hellboy version's of Multics you have to correct your PROFILES to able to run.

IE

0100 (seca) as PROVID should not contain 000000

0500 (via) as PROVID should not contain 000000

0DXX (cryptoworks) as PROVID should not contain 000000

18XX (nagra) as PROVID should have only 000000 ,

EXCEPTION all tunneled Nagra cards like ( 1811,1863,1883 etc. )

0BXX (conax) as PROVID should have only 000000

09XX (nds) as PROVID should have only 000000

06XX (irdeto) as PROVID should have only 000000

4AXX (bulcrypt) as PROVID should have only 000000

NOTE: this version of multics will not let you start with invalid PROFILES!

First time users should start it manually with putty and check the output if there are ERROR Message(s).

All first users should correct their PROFILES before put it in your start scripts,

the ERROR Message will contains the PROFILE name and the ERROR what should be corrected.

multics-r82-hellboy-v33

## r82-hellboy-V33

- [FIX] added 1801 to able to set provid

- [ENH] you can now exclude from crccwcheck with DISABLECRCCWS_ONLY_FOR: 0500:030B00,032830,043800,043820,050F00 (same syntax like oscam caid:provider,provider;caid;caid), to show the REMOTE DISABLED CWC CAIDS in correct format with provid and caid UPDATE RECOMENDED.

- [FIX] 1708,1709 half nulled DCW fix for lines

- [FIX] 1708,1709 for cache lines too, please don't forget to skip checksum test for this caid

- [CLN] Removed the club link because no more online support

- [FIX] all input field's like <select text input textarea> the whole page by refresh will not be updated till they on focus

- [ENH] added favicon to webif so no more error in console of browser because of missing

- [ENH] added search funtion to all the Pages where could be useful

- [FIX] Fix the username and password for cacheex now it can contains #$%^& and other chars as well ( please read the multics.cfg file for more Info )

- [ENH] if you move your mouse over the Debug Log Window, the Update of Log will stop, until you move your mouse out of Log area (like in Oscam)

- [FIX] cs378x keepalive fixed CS378X KEEPALIVE: YES after port

This version ist problem with v13 sky de 09C4 Cards

DISABLECRCCWS_ONLY_FOR: 1811:003311,023311,003315,003341,00331B,000007,000107;0500:030B00,032830,041950,043800,043820,050F00;1817:000000,00006A;1818:000000,00006C,000007;1819:00006D,000007;098C:000000;09C4:000000;098D:000000;0E00:000000;1884:000000;1708:000000;1841:000000

why again no fix maxtv caid 1830 for test only!

## Changelog

## r82-hellboy-V34

- [FIX] If there someone not use the right new syntax for DISABLECRCCWS_ONLY_FOR: , the server won't start.

- [FIX] Show current Config ============ DISABLECRCCWS ============= will show the right values now.

- [FIX] If there is no DISABLECRCCWS option defined in config then it will take palce a default hardcoded list with these caids 098C:000000, 09C4:000000, 098D:000000, 1811:003311, 1811:023311, 1811:003315, 1811:003341, 1811:00331B, 1811:000007, 1811:000107, 0500:030B00, 0500:050F00, 1817:00006A, 1818:00006C, 1818:000007, 1819:00006D, 1819:000007, 0E00:000000, 1884:000000, 1708:000000, 1709:000000, 1841:000000

- [CLN] removed complete cacheex module not to have problems with oscam.

still many freeze with sky de can someone send please default setting and 09c4 profile

Thanks.

what is the difference between r82 and HB r82 version and which were more smooth and error free ?

How do I run this on zgemma running Wooshbuild without telnet/putty? I think it needs emu file?

yes need emu file

where can I find emu file? Mipsel file is not the same?