MultiCS r82 by hellboy - All Versions

it is same file this only works on open atv image 6.3v no tested on other images

Thank you! I'll try and test it out. I note the change log includes caid 1841 which I suspect is the one for VM UK?

multics-r82-hellboy-v35

thanks for update. Emu file the same or does that need updating too?

no

i done all config of v34 ssh command is Okay and says its runs multics. but when i go to browser and enter address its not located. page not found error. kindly help me. i do try even remove all profiles fix all errors but still ....

on your config

i'm guessing your trying to use existing config ie the one you used in HB-33

if

YOU READ POST 35 it tells you

if all else fails

remove

DISABLEGERMANPATCH: NO

DISABLECRCCWS_ONLY_FOR:

someone should have added this to the HB-35
- [ENH] Hellboy up v35, MultiCS Cache will be accepted only from Hellboy v35 and up

multics-r82-hellboy-v36

- [FIX] CS378X fixed, now working LG Cacheex from OSCAM ( here must be some more funtionalities to Implement because only connect and
      if LG active then no hits ) and CS378X Normal lines working again
- [ENH] Added sort to all important Fields like in: Cache ( HOST, IP, ADDRESS, PING, REQUESTS, REPLIES, SENT REQ, SENT REP, CACHE HITS, INSTANT HITS )
     and on Profiles( TOTALECM, ACCEPTEDECM, ECM OK ) and at least in CacheEX ( HITS, INSTANT HITS ). If you are with mouse over these Tables the update is
     working only on ROW where the mouse over situated, if you move the mouse out of table the refresh comes back like normal. For sort you have to click on
     these Fields from table, every click change the sort order Descending then Ascending

multics-r82-hellboy-v36.zip

multics-r82-hellboy-V37

- [FIX] Polaris fix, now you able to set POVID in Profile fort this CAID: 4AEE since the provider changed to 000001

- [ENH] you should now have better times on client side on every provider ex: 09C4 now between 110-130ms

multics-r82-hellboy-v37.zip

multics-r82-hellboy-v38.zip

r82-hellboy-V38

- [FIX] CAMD35 is fixed, here the users if they are inactive 90 seconds they appear like offline because Camd35 is UDP so there's no connection

- [ENH] If there a newer version of HB then it will popup a message (For your Info - There is a newer version of HB, please update for better compatibility.) on every page visit, in this case editor and restart menu will be disabled as well

multics-r82-hellboy-v39

- [ENH] New option SIDSWCRC, where you can add your SID'(s) list for those Profile'(s) where DISABLECRCCWS enabled but some of SID'(s) need CRCCheck like 48Bit by 09C4 and maybe other Provider'(s) as well, for syntax please read the multics.cfg inclulded in archive

- [APY] F, MGUSER, CAMD35 USER, CS378X USER all limited to 400, this is a hobby. All Cacheex capable users limited to how many normal and or cacheex setup you have Ex: 200 CS378X normal user - then you able to set 200 CS378X cacheex user till you reach the limit of 400 total

multics-r82-hellboy-v39.zip

r82-hellboy-V40

-

[FIX] With the new parameter SIDSWCRC you can now use DISABLEGERMANPATCH: NO, better not to disable, on client side neeed skip for all to work

- [ENH] SMS messege will be sent to Telegram if you have TELEGRAM enabled in your config, SMS size max 700 Chars

- [CLN] Expiredate removed ! this is a hobby

- [SEC] SMS send and receive message sanitized

- [ENH] Added new options for TELEGRAM module: Default option is to send you a message on every HB start so this no need param

TELEGRAM CCCAM: 1 - this will send you messages from CCcam

TELEGRAM CACHE: 1 - sale as the first one just for Cache ans so on till system

TELEGRAM MGCAMD: 1

TELEGRAM CS378X: 1

TELEGRAM NEWCAMD: 1

TELEGRAM CAMD35: 1

TELEGRAM SYSTEM: 1 - by this option you will get the message if someone tried to login to your webif but invalid credentials and also the SMS send Note: all line options except system, are only active if you have also the firewall (FAILBAN) active, because it would be too much messages and if a user would get banned trought FAILBAN then it comes only once.

r82-hellboy-V41

- [ENH] to get rid of all stupid ECM requests, there is a new option introduced. ECM HEADERWLST: 0102030405,0102030406 and this way we can filter ECM requests with wrong header. This options must be set on all profiles

- [ENH] added new field to Profiles on WEBIF to show how many ECM LENGTH and ECM HEADER was blocked

- [ENH] added ecm length to see in Debug log window id decode failed

- [FIX] pages refresh was fix by focused inputs and mousever events, removed not to refresh the whole page when it's not needed

r82-hellboy-V42

- [ENH] to get rid of all stupid ECM requests, there is a new option introduced. ECM HEADERWLST: 0102030405,0102030406 and this way we can filter ECM requests with wrong header. This options must be set on all profiles

- [ENH] added new field to Profiles on WEBIF to show how many ECM LENGTH and ECM HEADER was blocked

- [ENH] added ecm length to see in Debug log window if decode failed

- [FIX] pages refresh was fix by focused inputs and mousever events, removed not to refresh the whole page when it's not needed

- [FIX] fixed issue on index page what caused segfault wehn accessed the home page

r82-hellboy-V43

- [ENH] Added checksum for all NDS caid request, all failed checksum's will be flaged in Debug as "ECM Checksum Error"

- [FIX] Fix on Version blocking

- [SEC] all connections from HB Versions will be allowed only previous Versions, all older will be blocked

r82-hellboy-V44

- [ENH] Added to Editor page line numbers and current position, now you can better identify the errors from verbose mode and also overall view is better. The current position is same like the error show's in verbose mode

- [FIX] some HB connections was disabled by accident, this was fixed

- [LNK] by request of Admin from multics.info, added the webpage link to the first page

r82-hellboy-V45

## Changelog

##

- [FIX] Editor if not fullscreen the linenumbers was broken

- [ENH] Added filtering possibility on Debug, and the whole Debug Page was rebuild for better user experience

- [SEC] Up now will be generated md5 hash for all files and added to checklist.chk to able to identify if the HB original version is

- [ENH] Added some more info to debug by checksum errors

- [ENH] New profile option SIDSSKIPEXTRACRC, with this option you can skip CRC Check for CW if there on same caid,provid also same sid but different Provider

- [ENH] Added scroll to top in Editor Show current Config Page

- [ENH] Added global option to Disable peers with high ping CACHE MAXPING: 100 # value is in milliseconds (default = 100 max 200)

- [ENH] Enable 186D Caid to set Provid (003511) in Profiles

- [ENH] Now you can create separate profiles with same caid and provid and will identify on request by sid. If there no sid could be identified then will get the last founded profile with caid and provid

check the cfg it have 2 multcs.cfg and also check changelog as well

r82-hellboy-V46

- [FIX] separate profiles with the same caid and provid was fixed because when header white list was set, then was the logic broken
- [FIX] all 0500 caid's had low cache hits. Now it is fixed, but you have to put on your profile(s) SID list
- [SEC] HB version control fixed
- [FIX] if you add DISABLECRCCWS_ONLY_FOR new data in your .cfg then it will add to default hardcoded list and not just what you have in your config
- [FIX] CACHE MAXPING if is set, added to "Show current Config" page

                                                         r82-hellboy-V47

- [ENH] Added channel info to debug log

- [FIX] Fixed segfault caused by .cfg read

- [ENH] Added Gen.PASS Button to Editor, this way you can insert at current position of cursor a randomly generated password

- [ENH] Added Restart confirmation to prevent accidental restarts

- [FIX] arranged stats on profile page so you don't have to scroll one more page and now also the space is better used

- [FIX] DISABLECRCCWS_ONLY_FOR like DCW crc check is fixed because of race condition UPGRADE RECOMMENDED

- [APY] F, MGUSER, CAMD35 USER, CS378X USER all limited to 200

- [FIX] Fixed debug logging, was only every 2nd line printed now it prints all

- [ENH] Added second filter input and you can change back color and the color of filtered content

- [ENH] Optimized the whole code by compiling

Multi CardServer r82-hellboy-V47 based on the work by evileyes - Build date: Jul 26 2020 21:00:55

Segmentation fault

multics.64bt

and multics 32x no error but not http port not work in browser it mean not run