Hi,
I keep getting freezes on a HD51 and been told by server guy fine his end.
Anyone know where i can download the correct OScam for a Mutant HD51 and the config file?
Thank you.
There are 41 replies in this Thread which was already clicked 4,288 times. The last Post () by abu baniaz.
Hi,
I keep getting freezes on a HD51 and been told by server guy fine his end.
Anyone know where i can download the correct OScam for a Mutant HD51 and the config file?
Thank you.
OscamEmu or Oscam ?
OscamEmu or Oscam ?
OscamEmu
Anything you want me to share here to check out for me?
Also i am using OpenVix latest image.
Keep your oscam configs as basic as possible, with minimal values, that way you can rule out a mis-configuration with oscam.
Check the oscam live log in the web-interface for errors while viewing any channels that are freezing.
If you have any of these values on the [reader] remove them to see if it helps:
Keep your oscam configs as basic as possible, with minimal values, that way you can rule out a mis-configuration with oscam.
Check the oscam live log in the web-interface for errors while viewing any channels that are freezing.
If you have any of these values on the [reader] remove them to see if it helps:
Thanks is this reader look ok to you:
[reader]
label = Cable
protocol = newcamd
device = server,port
key = 0102030405060708091011121314
user = name
password = pass
disableserver
filter = 1
fallback = 1
caid = 1841
ident = 1841:000000
audisabled = 1
inactivitytimeout = 60
group = 1
emmcache = 1,3,31
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
Display More
Keep your oscam configs as basic as possible, with minimal values, that way you can rule out a mis-configuration with oscam.
Check the oscam live log in the web-interface for errors while viewing any channels that are freezing.
If you have any of these values on the [reader] remove them to see if it helps:
I installed that oscam ipk but in a bootloop after restarting GUI any ideas what to do now.
I would start with minimal values. If the reader isn`t working, then add the caid = 1841:
label = Cable
protocol = newcamd
device = server,port
key = 0102030405060708091011121314
user = name
password = pass
group = 1
I installed that oscam ipk but in a bootloop after restarting GUI any ideas what to do now.
You will still have Telnet access.
Run this command opkg remove enigma2-softcams-oscam-all-images
But he wanted Oscam-Emu and not Oscam, though I don't know why, since I don't see any virtual reader defined in his configuration above.
But he wanted Oscam-Emu and not Oscam
The version posted above has the EMU patch included. It has been tested by many without issue, not sure why this has produced a loop.
Oh, OK, sorry then. I thought the EMU module wasn't included because the EMU module (patch) wasn't included in the IPK file name. :)
//// EDIT :
Oscam's functionality is better tested outside the IPK installation package by testing its launch. It must be copied to the "/usr/bin" directory (for example, using an FTP connection), then set the execute attribute "chmod +x /usr/bin/oscam" (via Shell) and finally try to start it directly in Shell: "/usr/bin/oscam --help" or "/usr/bin/oscam -V". If it does not start (if it freezes) then this binary is incorrect. If it starts, you need to add arguments (to run Oscam as a daemon, as well as other arguments such as specifying a configuration directory to be sure and set the restart level via OpenWebif).
I don't know for sure, but I think there's no need to place a binary file in the "/usr/bin" folder under Enigma to start it. I think it is enough to place the file in "/tmp" folder, set the attributes ("chmod +x /tmp/oscam") and then run it for the test.
Of course, if everything works, the Oscam automatic start is also possible with the init.d script. Here is my "softcam" bash script:
But he wanted Oscam-Emu and not Oscam
The version posted above has the EMU patch included. It has been tested by many without issue, not sure why this has produced a loop.
I removed it same issue, performing a flash now very odd.
So I don't deal with Oscam for CAID 1841 because I don't know this provider. Also in the past, someone wrote that he also had problems freezing on some CAID 1841 channels. Perhaps it would be a good idea to try Doscam client or Mgcamd client instead of Oscam. Well, unfortunately, I'm not going to advise you more.
So I don't deal with Oscam for CAID 1841 because I don't know this provider. Also in the past, someone wrote that he also had problems freezing on some CAID 1841 channels. Perhaps it would be a good idea to try Doscam client or Mgcamd client instead of Oscam. Well, unfortunately, I'm not going to advise you more.
Mgcamd not supported on arm receivers?
Quote from gorskiPurE2 has everything in the feeds...
Give PurE2 a try.
Quote from gorskiPurE2 has everything in the feeds...
Give PurE2 a try.
Any reason why?
It's a unique image which has it all, more than any other image, I would argue but of course - I'm biased...
So, check it out, please... and do tell... ;)
All you need is in PurE2 section!
Any reason why?
Mgcamd not supported on arm receivers?
If you want mgcamd that`s a reason.
It's a unique image which has it all, more than any other image, I would argue but of course - I'm biased...
So, check it out, please... and do tell... ;)
All you need is in PurE2 section!
Do Kiddacs skin support this image?
And also are you saying Mgcamd works on this image?
Don't change the skin and avoid needless problems... Give it a chance, enjoy something new...
We have it all - MGcamd, warts and all... ;)
Don't change the skin and avoid needless problems... Give it a chance, enjoy something new...
We have it all - MGcamd, warts and all... ;)
Sorry i am a kiddac fanboy tell me if it works or otherwise it doesn't have everything. :P
Don’t have an account yet? Register yourself now and be a part of our community!