Posts by xsony_ngux

Quote from KiddaC

There is no openvix version of the tabs anymore. They changed all their epg code, so it no longer works.
Hence why the only file on that post says openatv.

Is it possible for something to add please for openvix?

Or would I have to flash to openatv? Which openatv version would it work with if not? Because i saw a few yesterday there so many releases like 7.1, 6.4 and another can't remember.

Is wooshbuild still a thing to flash to or better to flash from the image on the open atv site?

Hi, I can't seem to get the EPG tabs working on the latest openvix build not sure why (have a zgemma h9 se). I was trying on sly Q skin by kiddac but also vskin and even after installing it just wont update with tabs. Please can this be looked into or advice what needs to be done for the latest sly Q skin.

Version of skin i got is here and the steps -> *UPDATED* Slyk Q 1080 (Install - FAQs) - Enigma2 KiddaC - Linux Satellite Support Community (linuxsat-support.com)

I followed this part ->

"

EPG Buttons / Tabs Mod

(See Graphical EPG Picture in the Gallery Below.)

OpenATV - enigma2-plugin-extensions-openatv-epgselection-mod_3.1_all.ipk Post Nov 2019

This skin will only work on newer builds due to the new button codes being used."

Trying to get the part highlighted red pasted-from-clipboard.png

pasted-from-clipboard.png

Hi BBC Iplayer is not finding all the episodes for a show.

Quote from master G

Code

hi,




After a not participate in the "original" Airplayer plugin so devoid of actual source code is really possible, I've decided to build its own version.




I summarize just briefly summarize the main points:




     Video and pictures (preferably double twist) NO audio with Apple's devices, with Android and audio
     Jump & progress indicator (thanks to the XMBC project)
     (hopefully) compatible with all versions of IOS with iTunes AirPlay and tested primarily with iTunes and its own lack of DoubleTwist for Android device i *
     with Buggarantie: p
     You can set the buffer size in the plugin menu when you want, at low speed network connections can help it.
     To make it work properly a new version (after the 1.03.) Of the Bonjour plugin is required. If not used, the whole thing works only with old IOS versions and iTunes.
     Source is in the ipk, under the license of the original Pascal Airplayers Widdershoven the license accordingly.

Display More

penair_0.5.4

Code

Changelog:
* 0.5.4
** Fix crash on shutdown when plugin has been disabled in plugin-setup
** Fix previous service not restoring / plugin not closing when reaching the end of the media played




* 0.5.3 - minor bugfix

MasterG, please could it be updated to iOS 13?

Quote from marcmcw

Hi Guys,

Just came across this i gave this a try on my vusolo2 and it did show up on allconnect but wouldn't work. I have been using SiftemAirplay (.ipk attached) since 2013 and has worked flawless for casting links from titanium morpheus ect just select play with and allconnect(playstore). i have tested on black hole, openATV and if i remember correctly worked on openpli.

kindest regards,

Marchttps://mega.nz/#!zB52VJKS!E5E…EJ1S8dMFSWtENYcMFx9FIr0go

Thanks for sharing, is that the latest version?

Say if you had a full season of paw patrol and wanted to make a bouquet in the favourites list and copy all the shows in that bouquet is it possible?

I know there the way of going on file list but was thinking something more organised on the favourites list?

Thanks

Quote from abu baniaz

I have just tried cross EPG on a different receiver using pure2, no crash.

Hopefully your crash log will show problem

It happens when i press go onto settings > CrossEPG

I figured the issue just now to be with the skin.xml i overwrit before from OpenVix Mods i did and replaced the original and its now loading .

Thanks for the help guys!

Quote from abu baniaz

I have just tried cross EPG on a different receiver using pure2, no crash.

Hopefully your crash log will show problem

Hope it's not skin related but uploaded.

Quote from tromo

It works just fine, except for aarch64 boxes (osmio4k, A5), where epgimporter works fine, as well as on other boxes.

I get a crash on mutant HD51 with a log in home/root/logs

Any work around?

I downloaded 0.8.6 from the feeds.

As title suggests, please can someone share a working version please?

Thank you.

So my question is how they made it work?

I hope someone can answer.

Thanks.

Quote from gorski

No, actually: you are wrong on EVERYTHING you have written and yet you are LOL-ing here, dismissing things before you have studied the issues even minimally and so on and so forth. I hate the "LOL thang" but I'll make an exception in your case: LOL indeed!:tongue1:

MastaG is not just any old "user" here and neither am I, we know what we are saying and we have really good reasons why we say things!!! We put some time and effort into it and it's not like we're without any talents... but OK....

PurE2 and everything connected with it is more or less pretty darn well supported - in some detail, step-by-step type of support, especially by yours truly... Unless you have mislaid your spectacles on top of your head again... You don't even have to search beyond this forum FCOL... but OK...

CrossEPG is nothing to do with PurE2 team - it always was full of bugs and that's just how it is... There seems to be no helping it, despite some valiant efforts to improve it... I have given up on EPG plugins generally, to be honest. Whatever EPG comes with the provider is fine by me... But OK... (Jens might help you out on this one, I gave up on this plugin long ago...)

OSCam EMU works fine in our machine (as in "yours and mine", since I have the same OEM => H7S)! Lately there was a wobble with the German package but it's being worked on... Otherwise, the best of the lot, period! But OK, you have it all figured out so these superficial "judgements" keep flying...

MGcamd as well - tested, the same as all of the other CamDs! All you need to do is - KISS strategy - put your C-lines in (cccamd.list - you even get an example of this file with MGcamd settings files, so it's really easy... but OK...) - and basta! Nothing else! No need to mess around with any of the other files. The author is like that, he sorts it all out, regardless of the settings file, whatever they are like, you just put in the C-lines... I have written about it on this forum, too...

d2e85a74.jpg

a6e2f3cea5dad539f.jpg

35efe998263e2860642dbc49c.jpg

"PurE2 is experimental build" - don't you have any self-control, no reflective capability, to at least know that one is NOT to pass a high-handed judgement like that WITHOUT having made ANY REAL EFFORT regarding its structure, how it functions with the major plugins you mention etc.?:eye roll: Honestly, would you wanna be dismissed out of hand as a person or as a professional, without the person judging knowing you at all?!? Would you deem this to be a fair assessment of you and/or your capabilities, without even minimally establishing basic facts?!?:quiet:

Jesus Marx wept...:wtf1:

Display More

Thanks for the info but you didn't mention anything about N lines on mgcamd, so the setup still remains a mystery.

Quote from gorski

Who is "we"? The brainless, spiritually lazy, disinterested lot? This is not for you, fanboy. Travel well...

NO, i actually was getting on well with the image, though there is a few issues i started to get on the near end of the set up.

There isn't much documentation or tutorials which you could help me with.

I also googled for solutions and found very little support for the image.

We need more details on setting it up imo.

CrossEPG requires modification from what i been told and this just causes complication.

So no everything is not supported properly.

Hi Kiddacs, what file am i looking at to change the channel selection whats on now color?

(code line please)

To be precise this is the part i mean: http://prntscr.com/nfwpuf

Quote from s3n0

I didn't write anything about copying. Find and edit as needed.

I might as well do a word search quiz, we need a pre-configured build xD

Quote from s3n0

But I have already mentioned in the code TAG, in the post above, what to change in the Mgcamd configuration. OMG.

I copied and pasted that fragment of code and restarted cam had same issue.

Nevermind, user who told me to try PurE2 i would say its still an experimental build.

Couldn't even get CrossEPG to work it crashes and mgcamd requires modification upon installing it.

It probably has something to do with the mg_conf and there's not even a clear tutorial i can find for it.

Quote from s3n0

Quote from xsony_ngux

Quote from gorski

Have fun, fanboy... ;)

I am struggling to get mgcamd to work, i put my line in usr/keys in newcamd.list but when i start the 1.35 cam its not activating?

U got a tutorial??

I activated it as well in pmanager

Display More

After installing Mgcamd you should have default config files with comments included, in the folder "/usr/keys" but with some strange extension. Remove the extension if there is any and edit then configuration as needed. Of course, the neccessary files are:

"mg_cfg":

Code

# box type
#    00 autodetect, change only if you think wrong type detected.
#    01 dbox2
#    02 dreambox
#    03 triple-dragon
#    04 relook
#    05 openbox
#    06 enigma2
B: { 06 }

# network mode, use summ for several clients
#    00 no network (default)
#    01 newcamd netclient
#    02 radegast netclient
#    04 camd3 netclient
#    08 gbox netclient
G: { 01 }

Display More

Of course, you can also turn off EMM in your mg_cfg file as you do in your Oscam config. Find this EMM option and edit because EMM is probably enabled by default (I don't know for sure). Find and edit to:

A: {00}

"newcamd.list":

(if you use the newcamd protocol - what you're using)

Code

CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = hostname-or-ip-addr port username userpwd 01 02 03 04 05 06 07 08 09 10 11 12 13 14

Display More

Thanks for the reply, this is everything that is in the mg_cfg

I dont understand what you mean by 'extension'

Quote

Please advice further:

# EMM messages

# 00 don't show any EMMs (default)

# 01 show only valid EMMs

# 02 show valid and bad EMMs with complete data display

M: { 01 }

# ECM messages

# 00 don't show anything about ecm

# 01 normal mode, show pids processed, decoded ecm and cw

# 02 verbose mode, show valid and bad ECMs with data

C: { 01 }

# AU

# 00 disable, no emm pids processed

# 01 enable, emm pids always processed for soft-au and shared cards

# 02 auto, emm started only if channel cant be decoded

# 03 process emm pids for network cards update only

A: { 01 }

# key update (sum 01 or 02 with 04)

# 01 update only new keys, default setting

# 02 update all keys (used for valid PMK checking)

# 04 enable TPS au

# + tps SID, which pmt pid contains au pid

U: { 05 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)

# 00 files in /var/keys

# 01 files in /tmp

T: { 00 }

# network mode, use summ for several clients

# 00 no network (default)

# 01 newcamd netclient

# 02 radegast netclient

# 04 camd3 netclient

# 08 gbox netclient

# 32 cccamd netclient, card list saved as /tmp/cccamd.info

# (ECM only, supported server version up to 2.1.1, later not work)

G: { 33 }

# network retry, use summ for several options

# 00 disable

# 01 retry every new ecm

# 02 try to connect to offline shares every Q: seconds

# 04 try to detect and fast reconnect to lost (and not used atm) server

# + XX messages number and YY seconds to reconnect

# mg will reconnect to server, if no answer to last XX ecm/keepalive or

# if no answer for last ecm or keepalive sent for YY seconds

# set to 0 to disable

N: { 07 } 5 30

# network ecm timeout in seconds

K: { 05 }

# newcamd dead routes connect retry, sec

Q: { 600 }

# network shares priority

# 00 gbox, newcamd, cccamd, radegast, camd3 (default)

# 01 camd3, radegast, cccamd, gbox, newcamd

# 02 cccamd, newcamd, camd3, gbox, radegast

P: { 02 }

# on screen display type

# 00 No OSD (default)

# 01 neutrino

# 02 enigma

# 03 relook

# + user password for http auth

O: { 00 } username password

# on screen display Options, summ of:

# 01 show emu ecm

# 02 show network shares messages

# 04 show decoding failed / fta

# 08 show emm keys update

# + web port to use for osd

S: { 03 } 80

# Log option, summ of:

# 00 off

# 01 network udp log

# 02 log to console

# 04 file, appended ! delete it by yourself, before it eat all your hdd

# + IP udp-port log-file-name

L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds

# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,

# for openbox/elanvision users with remote shares make sense to set it higher than default value,

# to not hammer cards while timeshifting or playing crypted recordings.

E: { 15 }

# cache option, summ of:

# 00 Off (default)

# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list

# 02 Ecm data cache, remember CW for (E:) time

# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart

H: { 07 }

# reread files, summ of:

# 00 No (default)

# 01 reread config file on channel change (including priority and ignore, but not replace/cache)

# 02 reread SoftCam.Key on channel change

# 04 reread SoftCam.Key if file changed

R: { 04 }

# debug, summ of

# 00 off (default)

# 01 debug ecm

# 02 debug emm

# 04 debug network ecm

# 08 debug network emm

# 16 debug network login

# 32 show mem/cpu stats every 1 min

# 64 add timestamp to log messages

D: { 00 }

# box type

# 00 autodetect, change only if you think wrong type detected.

# 01 dbox2

# 02 dreambox

# 03 triple-dragon

# 04 relook

# 05 openbox

# 06 dreambox/mips

# 08 stapi/kathrein

# 09 stapi/ipbox

# 11 stapi/openbox

B: { 06 }

# map all 180x nagra caids to 1801

# default is 01

F: { 00 }

# 00 don't show any EMMs (default)

# 01 show only valid EMMs

# 02 show valid and bad EMMs with complete data display

M: { 01 }

# ECM messages

# 00 don't show anything about ecm

# 01 normal mode, show pids processed, decoded ecm and cw

# 02 verbose mode, show valid and bad ECMs with data

C: { 01 }

# AU

# 00 disable, no emm pids processed

# 01 enable, emm pids always processed for soft-au and shared cards

# 02 auto, emm started only if channel cant be decoded

# 03 process emm pids for network cards update only

A: { 01 }

# key update (sum 01 or 02 with 04)

# 01 update only new keys, default setting

# 02 update all keys (used for valid PMK checking)

# 04 enable TPS au

# + tps SID, which pmt pid contains au pid

U: { 05 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)

# 00 files in /var/keys

# 01 files in /tmp

T: { 00 }

# network mode, use summ for several clients

# 00 no network (default)

# 01 newcamd netclient

# 02 radegast netclient

# 04 camd3 netclient

# 08 gbox netclient

# 32 cccamd netclient, card list saved as /tmp/cccamd.info

# (ECM only, supported server version up to 2.1.1, later not work)

G: { 33 }

# network retry, use summ for several options

# 00 disable

# 01 retry every new ecm

# 02 try to connect to offline shares every Q: seconds

# 04 try to detect and fast reconnect to lost (and not used atm) server

# + XX messages number and YY seconds to reconnect

# mg will reconnect to server, if no answer to last XX ecm/keepalive or

# if no answer for last ecm or keepalive sent for YY seconds

# set to 0 to disable

N: { 07 } 5 30

# network ecm timeout in seconds

K: { 05 }

# newcamd dead routes connect retry, sec

Q: { 600 }

# network shares priority

# 00 gbox, newcamd, cccamd, radegast, camd3 (default)

# 01 camd3, radegast, cccamd, gbox, newcamd

# 02 cccamd, newcamd, camd3, gbox, radegast

P: { 02 }

# on screen display type

# 00 No OSD (default)

# 01 neutrino

# 02 enigma

# 03 relook

# + user password for http auth

O: { 00 } username password

# on screen display Options, summ of:

# 01 show emu ecm

# 02 show network shares messages

# 04 show decoding failed / fta

# 08 show emm keys update

# + web port to use for osd

S: { 03 } 80

# Log option, summ of:

# 00 off

# 01 network udp log

# 02 log to console

# 04 file, appended ! delete it by yourself, before it eat all your hdd

# + IP udp-port log-file-name

L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds

# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,

# for openbox/elanvision users with remote shares make sense to set it higher than default value,

# to not hammer cards while timeshifting or playing crypted recordings.

E: { 15 }

# cache option, summ of:

# 00 Off (default)

# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list

# 02 Ecm data cache, remember CW for (E:) time

# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart

H: { 07 }

# reread files, summ of:

# 00 No (default)

# 01 reread config file on channel change (including priority and ignore, but not replace/cache)

# 02 reread SoftCam.Key on channel change

# 04 reread SoftCam.Key if file changed

R: { 04 }

# debug, summ of

# 00 off (default)

# 01 debug ecm

# 02 debug emm

# 04 debug network ecm

# 08 debug network emm

# 16 debug network login

# 32 show mem/cpu stats every 1 min

# 64 add timestamp to log messages

D: { 00 }

# box type

# 00 autodetect, change only if you think wrong type detected.

# 01 dbox2

# 02 dreambox

# 03 triple-dragon

# 04 relook

# 05 openbox

# 06 dreambox/mips

# 08 stapi/kathrein

# 09 stapi/ipbox

# 11 stapi/openbox

B: { 06 }

# map all 180x nagra caids to 1801

# default is 01

F: { 00 }

Display More

Quote from meong

0e255428.png

Where is it saved at?

Quote from gorski

Have fun, fanboy... ;)

I am struggling to get mgcamd to work, i put my line in usr/keys in newcamd.list but when i start the 1.35 cam its not activating?

U got a tutorial??

I activated it as well in pmanager