I have installed oscam using setup file and it's a older version how do i update this to the latest oscam version
This is a windows pc
How to Update Oscam in windows pc
- Seaker
- Thread is marked as Resolved.
-
-
Oscam is designed primarily for Linux-based systems. Not for Windows. If you don't have a serious reason to use Oscam on Windows, then you better run it on some Linux.
Many people run Linux-Oscam on Windows through the Linux emulator - https://www.cygwin.com/ . But this is not a good solution. It can, of course, cause problems. Occasionally, Oscam versions are compiled (with a modified code) for a Windows system, but it is also modified and may differ from the original (for example, accessing USB devices - external USB card reader).
I won't advise you because I have never tried to put Oscam and Windows together. Only very little information is also available on the Internet. Sorry.
I found this - https://ulozto.net/!gBsOet7c3M…-32bit-for-os-windows-zip . This is also the CygWin version of Oscam. So, check it please :). But I don't know more about it, because I really didn't try to run Oscam on Windows.
-
Oscam is designed ....
Can you guide me to install this on linux pc
I followed this guide and installed oscam and copied confg files to usr/local/etc directory
and i tried opening webif but it's not working. tried with 127.0.0.1:8888
where do i'm doing wrongPrepair for compile with installing new needed packs:
Code:Codesudo apt-get install build-essential@@@WCF_PRE_LINEBREAK@@@sudo apt-get install libssl-dev libpcsclite-dev@@@WCF_PRE_LINEBREAK@@@sudo apt-get install mercurial cvs subversion libncurses-dev@@@WCF_PRE_LINEBREAK@@@sudo apt-get install cmake
2) Oscam compile:
2.1 Download OSCam
Code:
2.2 Compile OSCam
Code:
2.3 Copy OSCam Compiled file
Code:3) Unused oscam compile directory delete:
Code:
4) Setting oscam to correct attribute:
Code:
5) Oscam automatic startup with bootup
EDIT RC.LOCAL FROM NORMAL WINDOW
Code:
add next line before the "exit0" line, /usr/local/bin/oscam -b -r2
in server edition type
Code:
PUT CONFIG FILES IN USR/LOCAL/ETC -
It depends on which Linux distribution you have. Ubuntu discussion thread is here:
Tutorial: Updating Oscam to latest SVN - Ubuntu & debian with Simplebuild
In this tutorial, some "simplebuild" script is used, which, if I'm not mistaken, can compile Oscam for multiple chipset architectures. However, I think Oscam should also be on the feed servers of every Linux system. Most Linux systems already have Oscam on feed servers, so just install it through the package manager (apt-get or other, depending on the type of Linux).
-
what linux distro are you using ?
and if i were you
id do a search on google
for
how to enable rc.local in ubuntu
if your planning to use it
as most of the latest distros dont use it
Enable-rclocal-startup-file-on-Debian-9
same for ubuntu
-
It depends on which Linux distribution you have. Ubuntu discussion thread is here:
Tutorial: Updating Oscam to latest SVN - Ubuntu & debian with Simplebuild
In this tutorial, some "simplebuild" script is used, which, if I'm not mistaken, can compile Oscam for multiple chipset architectures. However, I think Oscam should also be on the feed servers of every Linux system. Most Linux systems already have Oscam on feed servers, so just install it through the package manager (apt-get or other, depending on the type of Linux).
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=18.04
DISTRIB_CODENAME=bionic
DISTRIB_DESCRIPTION="Ubuntu 18.04.2 LTS"
NAME="Ubuntu"
VERSION="18.04.2 LTS (Bionic Beaver)"
ID=ubuntu
ID_LIKE=debian
PRETTY_NAME="Ubuntu 18.04.2 LTS"
VERSION_ID="18.04"
what linux distro are you using ?
and if i were you
id do a search on google
for
how to enable rc.local in ubuntu
if your planning to use it
as most of the latest distros dont use it
Enable-rclocal-startup-file-on-Debian-9
same for ubuntu
This is the version i have
-
a nice tut on running oscam in ubuntu or any other
oscam-stop-start-script-anti-crash-monitor
or google
systemd script for OSCam
it makes it simple
it doesnt use rc.local
-
a nice tut on running oscam in ubuntu or any other
oscam-stop-start-script-anti-crash-monitor
or google
systemd script for OSCam
it makes it simple
it doesnt use rc.local
after trying few times
This command make it run systemctl start oscam
so i plugged my reader to ubuntu pc mouse protocol Now the everything work fine
But i Don't know how to add user to this,
What i did was
I installed ddns updater to ubuntu pc and checked it
Then I add users to the oscam like this[account]
user = checkme
pwd = 123
caid = 0631
au = reader1
group = 1
Then i add[cccam]
port = 40000
reshare = 1
ignorereshare = 0
version = 2.2.1
keepconnected = 1
stealth = 1
this to Config file
and add to the server file[reader]
label = remote1
protocol = cccam
device = my no ip ccount address,40000
user = checkme
password = 123
inactivitytimeout = 30
caid = 0631
group = 1
cccversion = 2.1.2
Then i tried to connect to NOIPADDRESS+port+username+password from my receiver but nothing works
it shows like only shows connecting
How Do i add users to this -
[newcamd]
port = 551@1802:000000,004801,004901;552@098C:000000
key = 0102030405060708091011121314
keepalive = 1
[cccam]
port = 12068
nodeid = 12345678abcdef12
version = 2.2.0
reshare = 2
updateinterval = 30
have you something like this above in oscam.config
and oscam.user
[account]
user = rabbit
pwd = dual
group = 1
cccreshare = 2
NO-IP ADDRESS use only for outside your network ie to a good friend
inside you home id use the ip of ubuntu to cccam
C: 192.xxx.xxx.xxx.xxx 12068 rabbit dual
from ubuntu to oscam
[reader]
label = ubuntu
protocol = cccam
device = 192.xxx.xxx.xxx.xxx,12068
user = rabbit
password = dual
group = 1
disablecrccws = 1
cccversion = 2.2.0
audisabled = 1
-
I Setup configuration files as you say but still i can't connect a user in to this
can you look through my configuration files i sent you a PM -
from ubuntu
what else are you using
what are you connecting to ?
is it oscam in a box
is it cccam in a box
from what i see you trying to connect to ubuntu oscam from ubuntu oscam
put in
oscam.user in ubuntu
[account]
user = rabbit
pwd = dual
group = 1
cccreshare = 2
put in
oscam.server on a box
[reader]
label = ubuntu
protocol = cccam
device = 192.xxx.xxx.xxx.xxx,12068
user = rabbit
password = dual
group = 1
disablecrccws = 1
cccversion = 2.2.0
audisabled = 1
-
from ubuntu
what else are you using
what are you connecting to ?
is it oscam in a box
is it cccam in a box
from what i see you trying to connect to ubuntu oscam from ubuntu oscam
put in
oscam.user in ubuntu
[account]
user = rabbit
pwd = dual
group = 1
cccreshare = 2
put in
oscam.server on a box
[reader]
label = ubuntu
protocol = cccam
device = 192.xxx.xxx.xxx.xxx,12068
user = rabbit
password = dual
group = 1
disablecrccws = 1
cccversion = 2.2.0
audisabled = 1
i'm using oscam on my ubuntu laptop with smargo reader
i sent you the config files as a pm
kindly check that... -
i did
and im going to say
i've never used a smargo reader
so i cant answer you
but read here
reader settings for most readers in oscam
Oscam + All different settings for cardreaders (smargo, omnikey, etc.)
but you cant have user in ubuntu oscam and send to the same ubuntu oscam
-
i did
and im going to say
i've never used a smargo reader
so i cant answer you
but read here
reader settings for most readers in oscam
Oscam + All different settings for cardreaders (smargo, omnikey, etc.)
but you cant have user in ubuntu oscam and send to ubuntu oscam
it's not smargo it's use mouse protocol it's a copy of smargo as i see
but you cant have user in ubuntu oscam and send to ubuntu oscam
I don't understand this... can you explain a bit
i just need to add a user in to oscam and connect it
there is no issue with reader section as i see...
Don't angry with me i just new to this stuff if you can edit my configuration with Teamviewer it will be great
Thanks :) -
imagine its a phone
can you call yourself ?
-
imagine its a phone
can you call yourself ?
here what i need to Do.
I have Irdeto card and i need to create a server to share it with my friends
i Don't have a dreambox, so i just only have Ubuntu PC with oscam installed
I connect my smargo reader and irdeto card and it's works fine
now what i need to do is simply create a user and giving it to my friends
From your help... i understand that i can share without no ip in my local network
so i created an account as you posted earlier and connect tried to connect with My koqit receiver
but i cannot connect to the account that i have created
That why i send you the configuration file to looking any errors because i'm new to this stuff
yes i understand that you are telling me ubuntu oscam can't connect to ubuntu oscam
i'm asking where i'm doing wrong???
if you have a gun i'm pretty sure you will kill me :D :P
OSCam Support Forum
Configs, discussion, downloads and guides for OSCam Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!