Ncam 10.4 compiled and patched by READ

**fairbird** · Aug 19th 2019

Ncam 10.4 compiled and patched READ

Code

[dvbapi] Rewritten the CA PMT parsing code
Some key notes for this revision:
* The CA PMT and PMT parsing code is split into separate functions. Additional functionality is also moved to different functions.
* The previous CA PMT parsing logic is retained (written by theparasol), but the code is much simpler, easier to maintain and a bit faster.
* The CA PMT message is not completely parsed now if there is no need for it (e.g. no change is made to the channel).
* The PMT is now parsed only if it's necessary (e.g. for powervu channels, when no streams are present in CA PMT, etc).
* Added preliminary support for reading the "ca_pmt_cmd_id" value. A future update (in oscam and enigma2) will allow using multiple oscam instances simultaneously.
* Added support for a new descriptor with tag 0x87 in the CA PMT message, used exclusively for sending the ca device information.
* Added detailed information for the private CA PMT descriptors supported by oscam in the readme (for dvbapi client developers).
[dvbapi] Fixed previous commit when WITH_EXTENDED_CW is enabled
[dvbapi] Fixed 'ca_pmt_cmd_id' value for PMT files
For CA PMT messages received via PMT files, set the "ca_pmt_cmd_id" to a proper value (ok_descrambling) instead of zero.
Also made few cosmetic changes.
[dvbapi] Reworked 'ca_pmt_cmd_id' skipping logic
According to the spec (https://www.dvb.org/resources/public/standards/En50221.V1.pdf), the "ca_pmt_cmd_id"
value shall be present inside the ES info loop. Unfortunately, each dvbapi client does each own thing. The
only reliable way to detect when this info is present in the CA PMT is to actually check its value, like it
was done in the old code.
Most boxes always send the typical value of 0x01 (ok_descrambling) and the above check works fine because
there is no descriptor_tag 0x01 to get confused with. On the contrary, for enigma2, values like 0x03 (query),
0x04 (not_selected) are possible (not yet, but soon). Skipping these higher values the same way will not work,
because descriptors with such tags can exist, so a different check is implemented for enigma2.
In practice, this commit fixes the VDR dvbapi plugin, as well as the enigma2 boxes with wrong dvbapi boxtype
setting ('none' instead on the correct 'dreambox' - the setting is irrelevant now, but will make a difference
in the future, so make sure you set it correctly).
[dvbapi] Added option to enable/disable ecm.info file creation
[nemu] Switched to oscam's function for getting the section length
[biss] Clean up and bug fixes in Mode 1

Display More

_{Download link}

Ncam-Images-MIPS-IPK (All Mipsel devices ipk install file)

NCam-Images-OSDreambox-DEB (All ARM devices deb install file)

*************

Here are Only Bin file ..

(build-mips (Gigablue-Dream-VU+-Xtrend-Formuler

(build-sh4 (Golden Media-Galaxy innovations-Amiko

(cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT

(aarch64-ARM (VU+4K Duo4K + osmio4k

(build-x86-Linux-pc (32bit-i686

(build-x86-Linux-pc (64bit

(build-mips (Tiviar plus and similar

(build-mipszrouter (Routers Mipsel DD-WRT

************** Bin files to support OpenSSL 1.1.1 **************

(build-mips (Gigablue-Dream-VU+-Xtrend-Formuler

(build-sh4 (Golden Media-Galaxy innovations-Amiko

(cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT

(aarch64-ARM (VU+4K Duo4K + osmio4k

kommer · Aug 19th 2019

After installing ipk it show in reader ncam 10.3

**Antepenultim8** · Aug 19th 2019

i replaced the bin

b3cbc013dbe019d458.jpg

**atlas35** · Aug 19th 2019

please compile for the following platforms

ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).

ncam.router-openwrt-ar71xx.mips Mips (Routers openwrt ar71xx).

ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx)

thanks

**fairbird** · Aug 19th 2019

Quote from atlas35

please compile for the following platforms

ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).

ncam.router-openwrt-ar71xx.mips Mips (Routers openwrt ar71xx).

ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx)

thanks

Display More

If you have toolchain for those device send it I will compile it ..

Because what I have it give me error compile on my ubuntu 18.10 .. I will upgrade it to 19 and I will test to compile it again

(Routers openwrt brcm47xx) error compile

Code

/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm47xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mipsel_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mipsel-openwrt-linux-uclibc/4.8.3/../../../../mipsel-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm47xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mipsel_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mipsel-openwrt-linux-uclibc/4.8.3/../../../../mipsel-openwrt-linux-uclibc/lib/crt1.o: file format not recognized; treating as linker script
/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm47xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mipsel_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mipsel-openwrt-linux-uclibc/4.8.3/../../../../mipsel-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm47xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mipsel_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mipsel-openwrt-linux-uclibc/4.8.3/../../../../mipsel-openwrt-linux-uclibc/lib/crt1.o:1: syntax error
collect2: error: ld returned 1 exit status
make[2]: *** [Makefile:449: ncam-router-OpenWrt-brcm47xx.mips.debug] Error 1
make[1]: *** [Makefile:421: all] Error 2
make: *** [Makefile.extra:163: cross-mipsel-routerwrtbrcm47xx-linux-uclibc] Error 2

(Routers openwrt ar71xx) error compile

Code

/home/raed/NCam/cross/OpenWrt-SDK-15.05-ar71xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-ar71xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/lib/crt1.o: file format not recognized; treating as linker script
/home/raed/NCam/cross/OpenWrt-SDK-15.05-ar71xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-ar71xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/lib/crt1.o:1: syntax error
collect2: error: ld returned 1 exit status
make[2]: *** [Makefile:449: ncam-router-openwrt-ar71xx.mips.debug] Error 1
make[1]: *** [Makefile:421: all] Error 2
make: *** [Makefile.extra:207: cross-mips-routerwrtar71xx-linux-uclibc] Error 2

(Routers openwrt brcm63xx) error compile

Quote

LINK ncam-router-openwrt-brcm63xx.mips.debug

/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm63xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm63xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/lib/crt1.o: file format not recognized; treating as linker script

/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm63xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm63xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/lib/crt1.o:1: syntax error

collect2: error: ld returned 1 exit status

make[2]: *** [Makefile:449: ncam-router-openwrt-brcm63xx.mips.debug] Error 1

make[1]: *** [Makefile:421: all] Error 2

make: *** [Makefile.extra:185: cross-mips-routerwrtbrcm63xx-linux-uclibc] Error 2

Display More

**atlas35** · Aug 20th 2019

Quote from fairbird
Quote from atlas35

please compile for the following platforms

ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).

ncam.router-openwrt-ar71xx.mips Mips (Routers openwrt ar71xx).

ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx)

thanks

Display More
If you have toolchain for those device send it I will compile it ..
Because what I have it give me error compile on my ubuntu 18.10 .. I will upgrade it to 19 and I will test to compile it again

(Routers openwrt brcm47xx) error compile
Code
/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm47xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mipsel_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mipsel-openwrt-linux-uclibc/4.8.3/../../../../mipsel-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm47xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mipsel_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mipsel-openwrt-linux-uclibc/4.8.3/../../../../mipsel-openwrt-linux-uclibc/lib/crt1.o: file format not recognized; treating as linker script
/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm47xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mipsel_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mipsel-openwrt-linux-uclibc/4.8.3/../../../../mipsel-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm47xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mipsel_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mipsel-openwrt-linux-uclibc/4.8.3/../../../../mipsel-openwrt-linux-uclibc/lib/crt1.o:1: syntax error
collect2: error: ld returned 1 exit status
make[2]: *** [Makefile:449: ncam-router-OpenWrt-brcm47xx.mips.debug] Error 1
make[1]: *** [Makefile:421: all] Error 2
make: *** [Makefile.extra:163: cross-mipsel-routerwrtbrcm47xx-linux-uclibc] Error 2
(Routers openwrt ar71xx) error compile
Code
/home/raed/NCam/cross/OpenWrt-SDK-15.05-ar71xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-ar71xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/lib/crt1.o: file format not recognized; treating as linker script
/home/raed/NCam/cross/OpenWrt-SDK-15.05-ar71xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-ar71xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/lib/crt1.o:1: syntax error
collect2: error: ld returned 1 exit status
make[2]: *** [Makefile:449: ncam-router-openwrt-ar71xx.mips.debug] Error 1
make[1]: *** [Makefile:421: all] Error 2
make: *** [Makefile.extra:207: cross-mips-routerwrtar71xx-linux-uclibc] Error 2
(Routers openwrt brcm63xx) error compile

Quote

LINK ncam-router-openwrt-brcm63xx.mips.debug

/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm63xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm63xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/lib/crt1.o: file format not recognized; treating as linker script

/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm63xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm63xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/lib/crt1.o:1: syntax error

collect2: error: ld returned 1 exit status

make[2]: *** [Makefile:449: ncam-router-openwrt-brcm63xx.mips.debug] Error 1

make[1]: *** [Makefile:421: all] Error 2

make: *** [Makefile.extra:185: cross-mips-routerwrtbrcm63xx-linux-uclibc] Error 2

Display More
Display More

unfortunately I do not have the material you want

In previous versions of ubuntu or debian

Is not possible if possible

of course thanks ..

**atlas35** · Aug 22nd 2019

Quote from fairbird
Quote from atlas35

please compile for the following platforms

ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).

ncam.router-openwrt-ar71xx.mips Mips (Routers openwrt ar71xx).

ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx)

thanks

Display More
If you have toolchain for those device send it I will compile it ..
Because what I have it give me error compile on my ubuntu 18.10 .. I will upgrade it to 19 and I will test to compile it again

(Routers openwrt brcm47xx) error compile
Code
/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm47xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mipsel_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mipsel-openwrt-linux-uclibc/4.8.3/../../../../mipsel-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm47xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mipsel_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mipsel-openwrt-linux-uclibc/4.8.3/../../../../mipsel-openwrt-linux-uclibc/lib/crt1.o: file format not recognized; treating as linker script
/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm47xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mipsel_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mipsel-openwrt-linux-uclibc/4.8.3/../../../../mipsel-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm47xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mipsel_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mipsel-openwrt-linux-uclibc/4.8.3/../../../../mipsel-openwrt-linux-uclibc/lib/crt1.o:1: syntax error
collect2: error: ld returned 1 exit status
make[2]: *** [Makefile:449: ncam-router-OpenWrt-brcm47xx.mips.debug] Error 1
make[1]: *** [Makefile:421: all] Error 2
make: *** [Makefile.extra:163: cross-mipsel-routerwrtbrcm47xx-linux-uclibc] Error 2
(Routers openwrt ar71xx) error compile
Code
/home/raed/NCam/cross/OpenWrt-SDK-15.05-ar71xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-ar71xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/lib/crt1.o: file format not recognized; treating as linker script
/home/raed/NCam/cross/OpenWrt-SDK-15.05-ar71xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-ar71xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/lib/crt1.o:1: syntax error
collect2: error: ld returned 1 exit status
make[2]: *** [Makefile:449: ncam-router-openwrt-ar71xx.mips.debug] Error 1
make[1]: *** [Makefile:421: all] Error 2
make: *** [Makefile.extra:207: cross-mips-routerwrtar71xx-linux-uclibc] Error 2
(Routers openwrt brcm63xx) error compile

Quote

LINK ncam-router-openwrt-brcm63xx.mips.debug

/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm63xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm63xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/lib/crt1.o: file format not recognized; treating as linker script

/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm63xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm63xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/lib/crt1.o:1: syntax error

collect2: error: ld returned 1 exit status

make[2]: *** [Makefile:449: ncam-router-openwrt-brcm63xx.mips.debug] Error 1

make[1]: *** [Makefile:421: all] Error 2

make: *** [Makefile.extra:185: cross-mips-routerwrtbrcm63xx-linux-uclibc] Error 2

Display More
Display More

my device USR Robotics 9108 brcm63xx

good working

**bcity** · Aug 22nd 2019

For me work OK.

OpentATV 6.3, Mutant HD51

**fairbird** · Aug 23rd 2019

Quote from atlas35
Quote from fairbird
Quote from atlas35

please compile for the following platforms

ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).

ncam.router-openwrt-ar71xx.mips Mips (Routers openwrt ar71xx).

ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx)

thanks

Display More
If you have toolchain for those device send it I will compile it ..
Because what I have it give me error compile on my ubuntu 18.10 .. I will upgrade it to 19 and I will test to compile it again

(Routers openwrt brcm47xx) error compile
Code
/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm47xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mipsel_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mipsel-openwrt-linux-uclibc/4.8.3/../../../../mipsel-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm47xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mipsel_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mipsel-openwrt-linux-uclibc/4.8.3/../../../../mipsel-openwrt-linux-uclibc/lib/crt1.o: file format not recognized; treating as linker script
/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm47xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mipsel_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mipsel-openwrt-linux-uclibc/4.8.3/../../../../mipsel-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm47xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mipsel_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mipsel-openwrt-linux-uclibc/4.8.3/../../../../mipsel-openwrt-linux-uclibc/lib/crt1.o:1: syntax error
collect2: error: ld returned 1 exit status
make[2]: *** [Makefile:449: ncam-router-OpenWrt-brcm47xx.mips.debug] Error 1
make[1]: *** [Makefile:421: all] Error 2
make: *** [Makefile.extra:163: cross-mipsel-routerwrtbrcm47xx-linux-uclibc] Error 2
(Routers openwrt ar71xx) error compile
Code
/home/raed/NCam/cross/OpenWrt-SDK-15.05-ar71xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-ar71xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/lib/crt1.o: file format not recognized; treating as linker script
/home/raed/NCam/cross/OpenWrt-SDK-15.05-ar71xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-ar71xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/lib/crt1.o:1: syntax error
collect2: error: ld returned 1 exit status
make[2]: *** [Makefile:449: ncam-router-openwrt-ar71xx.mips.debug] Error 1
make[1]: *** [Makefile:421: all] Error 2
make: *** [Makefile.extra:207: cross-mips-routerwrtar71xx-linux-uclibc] Error 2
(Routers openwrt brcm63xx) error compile

Quote

LINK ncam-router-openwrt-brcm63xx.mips.debug

/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm63xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm63xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/lib/crt1.o: file format not recognized; treating as linker script

/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm63xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm63xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/lib/crt1.o:1: syntax error

collect2: error: ld returned 1 exit status

make[2]: *** [Makefile:449: ncam-router-openwrt-brcm63xx.mips.debug] Error 1

make[1]: *** [Makefile:421: all] Error 2

make: *** [Makefile.extra:185: cross-mips-routerwrtbrcm63xx-linux-uclibc] Error 2

Display More
Display More
my device USR Robotics 9108 brcm63xx

good working
Display More

AS I wrote in my last replay ...

On ubuntu 18.10 I can not built files to those devices (brcm47xx or ar71xx or brcm63xx)

I have got error because toolchain not work probable with ubuntu 18 ..

Whaen I have free time I will try to upgrade my ubuntu to 19 and try again to build files to almost platform devices.

**atlas35** · Aug 23rd 2019

my device free space 1000 or 1200 kb

thanks..

MBI · Aug 25th 2019

I Have tested but it is not 10.4 NCam

************** Bin files to support OpenSSL 1.1.1 **************

(build-mips (Gigablue-Dream-VU+-Xtrend-Formuler

(build-sh4 (Golden Media-Galaxy innovations-Amiko

(cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT

(aarch64-ARM (VU+4K Duo4K + osmio4k

see here in my sat Dreambox 920 whit Open Vision 9.1 > that is version 10.2-r1

NCAM Admin Control

Access from: 192.168.178.19 | Run as: root

NCam Run Time: 00:01:11 | Process ID: 3128 | Server Uptime 00:14:56

Version NCAM: 10.2-r1 Build: 18-06-2019 Compiler: arm-unknown-linux-gnueabi-ssl

**fairbird** · Aug 25th 2019

Sorry ...

I have fixes download link ....

**odem2014** · Aug 25th 2019

Can Ncam be compiled for stapi based android box?

**fairbird** · Aug 25th 2019

All ncam files to be possible to compile are in the first post (Until now)...

kingcccam6028 · Sep 1st 2019

ncam not working on ubantu 18.10

cengizkartal · Sep 1st 2019

merhaba arkadaşlar NCam ubuntu'da OScam gibi neden çalışmıyor Oscam devre dışı bıraktım Ncam çalıştırdım ama sayfayı kaydetmek istiyorum kaydetmiyor neden acaba bu konuda yardımlarınızı bekliyorum

Display Spoiler

2019-09-01 21:17:35 00000000 s >> NCAm << cardserver log switched, version 10.3, revision r1 build 16-07-2019 (x86_64-linux-gnu-ssl)
2019-09-01 21:17:35 00000000 s (main) System name = Linux
2019-09-01 21:17:35 00000000 s (main) Host name = star
2019-09-01 21:17:35 00000000 s (main) Release = 5.0.0-25-generic
2019-09-01 21:17:35 00000000 s (main) Version = #26~18.04.1-Ubuntu SMP Thu Aug 1 13:51:02 UTC 2019
2019-09-01 21:17:35 00000000 s (main) Machine = x86_64
2019-09-01 21:17:35 00000000 s (main) creating pidfile /tmp/.ncam/ncam.pid with pid 3687
2019-09-01 21:17:35 00000000 s (emu) NCam version 788
2019-09-01 21:17:35 00000000 s (main) signal handling initialized
2019-09-01 21:17:35 00000000 s (config) ERROR: Cannot create file "/var/tuxbox/config/ncam.srvid2.tmp" (errno=2 No such file or directory)
2019-09-01 21:17:35 00000000 s (reader) emulator [emu] creating thread for device emulator
2019-09-01 21:17:35 00000000 s (main) waiting for local card init
2019-09-01 21:17:35 604D6B2D r (emu) Stream key delayer initialized
2019-09-01 21:17:35 604D6B2D r (emu) Stream relay server initialized
2019-09-01 21:17:35 604D6B2D r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2019-09-01 21:17:35 00000000 (emu) INFO: FFDecsa parallel mode = 128
2019-09-01 21:17:35 6443F231 h (webif) webif: decompressed 195841 bytes back into 448648 bytes
2019-09-01 21:17:35 6443F231 h (webif) HTTP Server running. ip=0.0.0.0 port=8181
2019-09-01 21:17:36 604D6B2D r (reader) emulator [emu] card detected
2019-09-01 21:17:37 604D6B2D r (reader) emulator [emu] found card system emu
2019-09-01 21:17:37 604D6B2D r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
2019-09-01 21:17:37 604D6B2D r (emu) Cannot open key file path: /var/tuxbox/config
2019-09-01 21:17:37 604D6B2D r (emu) Cannot open key file path: /var/keys
2019-09-01 21:17:37 604D6B2D r (emu) Total keys in memory: W:0 V:0 N:0 I:0 F:0 G:0 P:0 T:0 A:0
2019-09-01 21:17:37 00000000 s (main) init for all local cards done
2019-09-01 21:17:37 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2019-09-01 21:17:37 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2019-09-01 21:17:37 34D2B801 c (client) plain dvbapi-client granted (anonymous, au=off)
2019-09-01 21:17:37 34D2B801 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0 maximum number of filters is 64 (ncam limit is 64)
2019-09-01 21:17:37 34D2B801 c (dvbapi) Detected /dev/dvb/adapter1/demux0 Api: 0, userconfig boxtype: 0 maximum number of filters is 64 (ncam limit is 64)
2019-09-01 21:17:37 34D2B801 c (dvbapi) ERROR: Can't open device /dev/dvb/adapter0/ca0 (errno=2 No such file or directory)

**fegol** · Sep 3rd 2019

Quote from fairbird
Quote from atlas35

please compile for the following platforms

ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).

ncam.router-openwrt-ar71xx.mips Mips (Routers openwrt ar71xx).

ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx)

thanks

Display More
If you have toolchain for those device send it I will compile it ..
Because what I have it give me error compile on my ubuntu 18.10 .. I will upgrade it to 19 and I will test to compile it again

(Routers openwrt brcm47xx) error compile
Code
/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm47xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mipsel_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mipsel-openwrt-linux-uclibc/4.8.3/../../../../mipsel-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm47xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mipsel_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mipsel-openwrt-linux-uclibc/4.8.3/../../../../mipsel-openwrt-linux-uclibc/lib/crt1.o: file format not recognized; treating as linker script
/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm47xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mipsel_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mipsel-openwrt-linux-uclibc/4.8.3/../../../../mipsel-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm47xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mipsel_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mipsel-openwrt-linux-uclibc/4.8.3/../../../../mipsel-openwrt-linux-uclibc/lib/crt1.o:1: syntax error
collect2: error: ld returned 1 exit status
make[2]: *** [Makefile:449: ncam-router-OpenWrt-brcm47xx.mips.debug] Error 1
make[1]: *** [Makefile:421: all] Error 2
make: *** [Makefile.extra:163: cross-mipsel-routerwrtbrcm47xx-linux-uclibc] Error 2
(Routers openwrt ar71xx) error compile
Code
/home/raed/NCam/cross/OpenWrt-SDK-15.05-ar71xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-ar71xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/lib/crt1.o: file format not recognized; treating as linker script
/home/raed/NCam/cross/OpenWrt-SDK-15.05-ar71xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-ar71xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/lib/crt1.o:1: syntax error
collect2: error: ld returned 1 exit status
make[2]: *** [Makefile:449: ncam-router-openwrt-ar71xx.mips.debug] Error 1
make[1]: *** [Makefile:421: all] Error 2
make: *** [Makefile.extra:207: cross-mips-routerwrtar71xx-linux-uclibc] Error 2
(Routers openwrt brcm63xx) error compile

Quote

LINK ncam-router-openwrt-brcm63xx.mips.debug

/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm63xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm63xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/lib/crt1.o: file format not recognized; treating as linker script

/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm63xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm63xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/lib/crt1.o:1: syntax error

collect2: error: ld returned 1 exit status

make[2]: *** [Makefile:449: ncam-router-openwrt-brcm63xx.mips.debug] Error 1

make[1]: *** [Makefile:421: all] Error 2

make: *** [Makefile.extra:185: cross-mips-routerwrtbrcm63xx-linux-uclibc] Error 2

Display More
Display More

Example: OpenWrt

Code

wget -c https://downloads.openwrt.org/chaos_calmer/15.05.1/ar71xx/generic/OpenWrt-SDK-15.05.1-ar71xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64.tar.bz2

tar -jxf OpenWrt-SDK-15.05.1-ar71xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64.tar.bz2

dir_openwrt=$(pwd)/OpenWrt-SDK-15.05.1-ar71xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir
export STAGING_DIR="$dir_openwrt/target-mips_34kc_uClibc-0.9.33.2"
export CROSS="$dir_openwrt/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-0.9.33.2/bin/mips-openwrt-linux-uclibc-";

svn checkout https://github.com/OpenVisionE2/NCam/trunk ncam
cd ncam
./config.sh -g
make USE_LIBCRYPTO=1 USE_UTF8=1 CONF_DIR=/etc/config/ncam

Display More

try it...

cengizkartal · Sep 4th 2019

Hi friends NCam tvheadend why not run what I need to do waiting for your help on this

cengizkartal · Sep 4th 2019

how do I load this?

Checked out revision 10463.
root@star:~# cd ncam
root@star:~/ncam# ./config.sh -g
Please install dialog package.

root@star:~/ncam#

cengizkartal · Sep 4th 2019

https://youtu.be/SFcrPWn2Xb0

please can you help me out

Ncam 10.4 compiled and patched by READ

master G Aug 19th 2019

NCam Support Forum

Participate now!

Share