Hi Everyone, I had just flash my Dm7020Hdv2 with image,” openesi-8.6-dm7020hdv2-20190520.nfi” and done an automatic scan for Dvb-C & T2 channels. It is able to receive all channels of Dvb-C & T2. However in the T2 channels, none could be display. My box is installed with the Dvb-C/T2 dual tuner and the original Dvb-C tuner. Any help please?
Dm7020Hdv2-Image Could Not Display T2 Channels
- bumperbee
- Thread is marked as Resolved.
-
-
T2 H265 or H264... the DM7020HD is only H264 and cannot do H265 channels (you probably will get only the audio, but no video)...
Emo
-
Hi Emosim, thank you for your reply. When I try with images from Dreammultimedia and Newnigma, the T2 channels are working fine.
-
Ok, then it means the channels DVB-T2 you have are not H265, and there is some issue on the image or DVB-T2 drivers,
Emo
-
Please tell me how to fix this?
-
If image is "buggy" or doesn't support something, then your only solution would be to use another image as the image can be fixed only by the Team who developped it (try to contact the image team and tell them your problem, they could fix the image for you and with your help).
Emo
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!