I hope this is in the right section and if not let me know and I will move it. I keep getting this error message when trying to connect to my WiFi and also doing a few other things after installing the new E2 image on my amiko alien 2.
Error Screen on E2
- Craigb89
- Thread is marked as Resolved.
-
-
What image is that your trying ?
I dont have an alien anymore but give pure2 a try, i have heard good things
-
Cheers pal I’ll give that a shot in the morning and I think it’s OpenATV or something like that on it at the minute. Do I just flash that image the same way I did the other one as I’m turning off the box and holding OK and selecting enigma and so on? Thanks for the help.
Craig
-
Tried flashing that PureE2 image but my box was just stuck saying boot for about 20 minutes so gave up and I’ll try again tomorrow. Also it shouldn’t take that long to boot up a new image should it?
-
how are you flashing, using spark or the front buttons, also usbs can be a bit funny, normally 2 gig usb, also spark is the best way to flash and fastest, must be honest not used the a2 for a long time.
there is a lot of info on here regards flashing the a2
-
how are you flashing, using spark or the front buttons, also usbs can be a bit funny, normally 2 gig usb, also spark is the best way to flash and fastest, must be honest not used the a2 for a long time.
there is a lot of info on here regards flashing the a2
Well I know the usb is working because I flashed my first e2 image using it yesterday and it worked perfect but wasn’t sure how to do it with e2 already running the second time so I booted back into spark using the front button on stb then inserted usb and went into plugins and ran the e2 upgrade plugin and then tried to boot up by holding down OK and selecting enigma from the box as I didn’t really know how else to do as yesterday was my first time ever flashing a new image so I’m a small bit clueless to it as of yet! is there another way to do it or was that right?
-
-
Cheers pal I’ll give that a bash now with the new Pure2 image I downloaded. Thanks again for the help.
-
spark is the best way, but it can be funny how you use it, also i would re format the usb to fat32, before you put the image on it.
then extract the files and placeuImage and e2jffs2.img.
on the root of the usb ( its different if using the button method as thats in a folder)
place the usb in front or back (try both)
open the e2update in sparkMake sure the Update path is showing as /storage/c/
(providing the two files where saved to the root of your USB stick)and then press RED (Enigma2 Update).
-
spark is the best way, but it can be funny how you use it, also i would re format the usb to fat32, before you put the image on it.
then extract the files and placeuImage and e2jffs2.img.
on the root of the usb ( its different if using the button method as thats in a folder)
place the usb in front or back (try both)
open the e2update in sparkMake sure the Update path is showing as /storage/c/
(providing the two files where saved to the root of your USB stick)and then press RED (Enigma2 Update).
I downloaded a new Pure2 image because I think the one I was using was wrong for the a2 box and loaded it through spark then booted it up and it seems to be installing fine now! Hopefully the WiFi works on it now as it was working perfect on spark but not thenold e2 image I was running and I kind of need it to ftp to the box for plugins and what not. Hopefully this one works out fine! Thanks for the help pal
-
Seems to be stuck on this now fml!
Spark STI 7162 Support
Support for Amiko Alien 2, Delta, Dynavision 7162, Galaxy Innovations Avatar 2, Galaxy Innovations Avatar 3, Golden Media Spark Triplex, Golden Media Spark One, Icecrypt S3700 CHD, SAB Unix Triple HD, Samsat Linux 2, Satcom 7162, Sogno Spark Triple, Startrack SRT 2020 HD Plus, Superbox Z500, Truman TOP-BOX, Truman TopBox 2 Tuner, Visionnet Falcon, Spark STI 7162 Receivers.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!