No, oe 2.0
Try this image (Dream-Elite-4.1) and let me know if it works for you. RE: OPENBH-4.4.001-DM800SE-SIM2-15092020-PGS
EDIT
Fyi, I haven't dealt with this box for a long time. If it works for you, I'll try it again.
There are 85 replies in this Thread which was already clicked 14,635 times. The last Post () by frank087234.
No, oe 2.0
Try this image (Dream-Elite-4.1) and let me know if it works for you. RE: OPENBH-4.4.001-DM800SE-SIM2-15092020-PGS
EDIT
Fyi, I haven't dealt with this box for a long time. If it works for you, I'll try it again.
k i'm gonna try it tomorrow and let you know.
Display MoreNo, oe 2.0
Try this image (Dream-Elite-4.1) and let me know if it works for you. RE: OPENBH-4.4.001-DM800SE-SIM2-15092020-PGS
EDIT
Fyi, I haven't dealt with this box for a long time. If it works for you, I'll try it again.
with the "manual" method works fine on my dm800se clone (sunray triple tuner) sim 2.10
i have 2 partitions on the usb (mbr), 1st fat16, 2nd ext3.
i've restored the nfi image on the 2nd partition, copied kernel on the fat partition (and edited the autoexec) and it boots just fine.
i would say is a good image, but it miss openvpn that is a must have for me...
Yes, but I would like you to install DreamElite on a logical partition.
As I mention in my post #73, I have it installed in primary partition (Slot-01) and it works normally.
I'll try later to install it on a logical partition, although I've had no success in the past I've tried.
Well, I finished my trials and here is the result:
The old DreamElite image works normally in Slot-01 (primary) while it does not boot in Slot-49 and Slot-50 (logical).
Also, the 12 images I have in MultiMiniBoot do not boot into logical partitions.
The spin-sign runs continuously and the indicator screen on the front of the box goes in circles (fills and empties).
But no problem, I run them from multi-boot.
.
Don’t have an account yet? Register yourself now and be a part of our community!