Dm900 uhd 4k TP-Link TL-WN821N Wifi dongle how to?

There are 29 replies in this Thread which was already clicked 8,650 times. The last Post () by lunetoo.

    I see one of 2 drivers from above is the right one for your stick but i don't know if are the right one for Tp model... If i knew for sure one of them 2 are ok i would install them... But until then i'll have to wait... Unfortunatelly...

    Hello! I installed the above wifi drivers using DCC , I inserted one of the WIFI N black little stick on the front of the dm 900 usb, the little blue led light up but i can't find in network settings if the drivers are ok or not. Wifi settings doesen't appear on network settings.

    Can you , help?

    Thank's in advance!

    Quote from habib2535

    that's the point…

    ) i switched to OpenPLi 7.2

    2) I installed 2 drivers *.ipk, the one above and the one i found in this old thread both from Master G WiFi adaptor rtl8192eu drivers for dm900

    3) command usb-devices does not work on OpenPLI and command lsusb does not give any indication

    4) I plugged the stick and it worked… should be one of the 2 above drivers

    Hello! I installed the 2 drivers to. I inserted a WifiN stick in front of Dm900, blue led light on but i cannot find the wifi settings in Network, any ideeas? If stick light is on means the drivers are ok?

    This is what i know more or less about adding hw components

    - Led light ON means the usb device is powered

    - It also might mean that the motherboard of the DM recognizes the device from a hardware standpoint (normally lsusb should tell )

    - now if you still don't see Wlan icon appearing in Blue panel / system / … / Network / Setting, it means that the system still couldn't find a driver suitable for the usb device (conversely most OS are able to automatically associate an appropriate driver to a connected device provided that the appropriate driver is installed or at reach in the cloud. That's what happened to me by getting an old usb stick working in the machine by simply plugging it)


    Other point, I know you used DCC to install the driver - i personally prefer "apt-get / opkg install … " not knowing what the installer puts what and where !


    Now, regarding your topic, in another forum i have been told that there is no driver available for rtl8192eu chipset for enigma2 install !


    Hope that helps you

    Rtl8192eu is for the Tp link stick, i plugged another one i had little ine WIFIN 300mbs/ but not working, hopefully someone is going to find a suitable driver for the above stick.

    If you come across any info. about the above driver please let me know. 👍

Firmware, downloads and support for Dreambox DM900 UltraHD.

Your community resource for the Dreambox DM900 UltraHD satellite receiver — firmware images, channel lists, plugins and setup help.