Always the latest, yes...
New PurE2 v. 6.5 to test - your feedback, please...
-
- Image Download
- gorski
- Thread is marked as Resolved.
There are 1,315 replies in this Thread which was already clicked 138,022 times. The last Post () by krasnoludek123.
-
-
Reflash from beginning or update from inside the image?
-
It says do not update = from the beginning = from USB.
-
Drivers update for Zgemma (HiSilicon), Dinobots, Giga 4k (graphics/EGl)
-
Hello everyone
it may seems weird but ..
i wonder if u can pass me the site that being used to find channles broadcasting sports events
in wazzup plugin
-
you can check "liveonsat "
-
you can check "liveonsat "
thank you for the reply
but its not as accurate and precise as wazzup plugin
trust me
-
Well. I gave the Pure2 team feedback on a continuous reboot situation I have with the pure2 image. I waited patiently and things looked promising after downloading and installing "zgemmah7-PurE2-6.5-20200719_recovery_emmc.zip". I just did an update on my zgemma h7.ac and I'm back into the continuous 2 second reboot loop again. I have to go back to OpenPli again now. Hope this issue can be solved. Can't provide a log file because 2 seconds of reboot tine does not allow me to do that.
-
Further testing shows no reboot on IPTV or satellite channels. Only on terrestrial channels May have something to do with north America channels but wasn't an issue before.
-
Well. I gave the Pure2 team feedback on a continuous reboot situation I have with the pure2 image. I waited patiently and things looked promising after downloading and installing "zgemmah7-PurE2-6.5-20200719_recovery_emmc.zip". I just did an update on my zgemma h7.ac and I'm back into the continuous 2 second reboot loop again. I have to go back to OpenPli again now. Hope this issue can be solved. Can't provide a log file because 2 seconds of reboot tine does not allow me to do that.
hello,
test this for you stb please flash with USB clean without setting takeover, you can backup your setting manually. -
Thank you .atari. I'll give that a try on the weekend. Since the receiver doesn't reboot when tuned to satellite or IPTV, I was able to enter my email address in the log settings. I should be able to provide a copy of the log next time. Enigma2 has many features I still need to learn about.
-
Here is a debug log after my zgemmah7.ac rebooted when tuning to a terrestrial channel. I have zgemmah7-PurE2-6.5-20200729_usb installed.Enigma2-debug-20200801_07-19-54.log
-
You put in a finished/saved channels list or do you scan it manually?
-
I replace the satellites.xml file located in /etc/tuxbox using FileZilla with one generated by http://satellites-xml.org/ and scan satellite/terrestrial manually. The reboot still happens on terrestrial even if I don't replace the satellites.xml file.
-
There's something wrong there, then... But sorry, I am in EU... no idea...
I would do it without restoring settings, from scratch, manually scanning everything, one by one...
Then, test one at a time, removing all other cables etc. Process of elimination...
Good luck!
-
Yes, I did try without restoring settings. Basically started with a blank slate and didn't get too far before the reboot loop. Here is what I did.
I originally saw the problem after installing a plugin so I reflashed and just restarted the GUI while at the home screen to replicate the reboot problem after a plugin is installed, no problems. I then scanned terrestrial channels and watched for a few minutes, everything fine at this point. I then restarted the GUI while tuned to a terrestrial channel and the reboot loop started. I also tested OpenATV on my ZGemma H7.AC and had the same results described in this post. Front display shows 2537 after reboot.
So that test minimized the possible variables.
The log file I provided was generated after I tuned to a terrestrial channel inducing the reboot loop.
-
OpenPLi is a different branch - try that and tell, please...
Also, OPenViX - maybe... if you're lucky...
Don't restore settings!
Manually scan!
Good luck!
-
Hello everybody
🌹Many thanks to all the team🌹
✅Luckily,the latest version of PurE2 6.5 (19.7.2020) spark7111 is very wonderful and great.
❌Unfortunately; the same problem of remote volume circle (v +/ v -) changes channels.
👉 We hope to use neutrino settings for remote control to be perfect.
👍👍👍👍👍👍👍👍👍👍👍
-
Noooo....
Read a little, m8.... In Settings you can change that.
I wouldn't, I think our setting for that is much better (to me PurE2 settings combination is perfect!) - but if you are stuck on that....
-
Please give some details for this m8 ...settings to reach the perfect performance .
Thanks
PurE2 Team Images Support Forum ~ based on OE-Alliance
PurE2 Supported Models ~
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!