I'm waiting for another review brother, whether the image gets sharper and lighter on the remote
amiko8900-PurE2-6.5 - 30/05/2023 for Spark devices sti7111
-
- Spark 7111 PurE2
- ahmed gazye
- Thread is marked as Resolved.
There are 215 replies in this Thread which was already clicked 74,910 times. The last Post () by ahmed gazye.
-
-
I'm waiting for another review brother, whether the image gets sharper and lighter on the remote
My brother / abdulrois
This is not the defect of the version, but it is a defect of Spark devices that contain a weak and old hard ware in order to
meet modern enigma, emus plugins In order to make things more clear, the biggest problem with the Spark
devices at present is the weakness of the RAM, which causes heavy and stuck to device Even with trying to remedy this problem, we only succeed in reducing its damages, but we cannot fully address it because it needs to be changed and we
do not have it The size of the RAM currently needed for copying is not less than one GB ( 1024 MB), while the Spark RAM devices devoted to copying the enigma does not exceed 138 MB. You notice the difference is very large.In order to deal with that copy of the team in an acceptable manner, you must do the following
The basic skin of the copy changed with a lighter skin, as it consumed a large amount of ram
Installing the CacheFlush or ClearMem plugin, or both, and setting it to work every 5 minutes automatically, And when you feel the heavy of the version, use the Clear now in CacheFlush or ClearMem, by pressing the blue button on the remote when you turn them on.
in addition to doing swap at least 256 MB, so the swap is better to have twice the size of the RAM.
Turn off the emus if you do not see encrypted channels and play them only when needed
And install the necessary plugins and channels file only
-
</s> </s> </s> </s> </s> </s> </s> </s> </s> </s> </s> </s> </ s> </s> </s> </s> </s> </s> </s> </s> </s> </s> </s> </s> </s> </s> orang </s>
Saya tunggu tinjauan lagi sob, apakah gambar menjadi lebih tajam dan ringan di remote
Kakak saya / abdulrois
Ini bukan cacat dari versinya, tetapi ini adalah cacat dari perangkat Spark yang berisi perangkat keras yang lemah dan lama untuk
memenuhi teka-teki modern, plugin emu Untuk memperjelas, masalah terbesar dengan Spark
Perangkat saat ini adalah kelemahan RAM, yang menyebabkan berat dan menempel di perangkat bahkan memperbaiki masalah ini, kami hanya berhasil mengurangi kerusakannya, tetapi kami tidak dapat menentukan mengatasinya karena perlu diubah dan kami
tidak punya Itu Ukuran RAM yang saat ini dibutuhkan untuk menyalin tidak kurang dari satu GB (1024 MB), sedangkan perangkat RAM Spark yang dikhususkan untuk menyalin teka-teki tidak melebihi 138 MB. Anda perbedaannya sangat besar.Untuk mengetahui tim tersebut dengan cara yang dapat diterima, Anda harus melakukan hal berikut
Kulit dasar berubah dengan kulit yang lebih terang, karena banyak ram
Menginstal plugin CacheFlush atau ClearMem, atau membimbingnya agar bekerja setiap 5 menit secara otomatis, Dan ketika Anda merasakan berat versi, gunakan Clear now di CacheFlush atau ClearMem, dengan menekan tombol biru pada remote saat Anda mematikannya mereka di.
Selain melakukan swap minimal 256 MB, jadi lebih baik swap mempunyai ukuran RAM dua kali lipat.
Matikan emu jika Anda tidak melihat saluran terenkripsi dan putar hanya saat diperlukan
Dan instal file plugin dan saluran yang diperlukan saja
thank you for the advice my brother ... and we understand that RAM is in my spark. and God willing, I will try it and hopefully feel at home in this image.
-
-
in pure2 6.5 you cannot change the skin. Please help
-
My brother / abdulrois
Do not delete the main skin, but download a new skin from the server version
to change the skin
system / user interface / skin setup
-
after downloading the skin in the plugin's feed and then applying it, it didn't work for the skin we downloaded earlier but instead returned to the standard skin
-
-
ok thanks brother .. I am waiting for the next step
-
Quote
Friends,
Cant install on Truman 1+. Freezes on loading.
Any hint of the installation process.
-
Quote
Friends,
Cant install on Truman 1+. Freezes on loading.
Any hint of the installation process.
you can write to the version team on the next page of the forum if you want it, it is dedicated to member comments on the new version
-
ahmed gazye
Changed the title of the thread from “New Spark devices sti 7111 for amiko8900-PurE2-6.5 for test 03/09/2020” to “New Spark devices sti 7111 for amiko8900-PurE2-6.5 for test 01/10/2020”. -
My friends
new Spark devices sti7111 for amiko8900-PurE2-6.5 for test as at 01/10/2020
You can write to the version team on the next page of the forum if you want it, it is dedicated to member comments on the new version
New PurE2 v. 6.5 to test - your feedback, please...
Download from official website ...
http://www.pur-e2.club/OU/images/index.php?dir=6.5/fulan/
-
ahmed gazye
Changed the title of the thread from “New Spark devices sti 7111 for amiko8900-PurE2-6.5 for test 01/10/2020” to “New Spark devices sti 7111 for amiko8900-PurE2-6.5 for test 12/10/2020”. -
My friends
new Spark devices sti7111 for amiko8900-PurE2-6.5 for test as at 12/10/2020
You can write to the version team on the next page of the forum if you want it, it is dedicated to member comments on the new version
New PurE2 v. 6.5 to test - your feedback, please...
Download from official website ...
http://www.pur-e2.club/OU/images/index.php?dir=6.5/fulan/
-
My friends Ahemed Spark devices sti7162 for amikoalien-PurE2-6.5 for test as at 11/10/2020, found boot problem: after installation of freeccam 7.0.5 at full boot it remains in load 5, when restarting it remains in perennial boot. Installatazion new installed freeccam version 7.0.4 and everything ok, greetings
-
4eb41d98ec5707b6b05c1706.jpg04d512fa1b2d2147bbd22b5c5.jpg4eb41d98ec5707b6b05c1706.jpg04d512fa1b2d2147bbd22b5c5.jpg4eb41d98ec5707b6b05c1706.jpgOke, sukses untuk sti7111
Terima kasih banyak tuan.
-
link
-
-
Thanks my friend
-
ahmed gazye
Changed the title of the thread from “New Spark devices sti 7111 for amiko8900-PurE2-6.5 for test 12/10/2020” to “New Spark devices sti 7111 for amiko8900-PurE2-6.5 for test 29/10/2020”. -
My friends
new Spark devices sti7111 for amiko8900-PurE2-6.5 for test as at 29/10/2020
You can write to the version team on the next page of the forum if you want it, it is dedicated to member comments on the new version
New PurE2 v. 6.5 to test - your feedback, please...
Download from official website ...
http://www.pur-e2.club/OU/images/index.php?dir=6.5/fulan/
-
Thanks for your help
-
ahmed gazye
Changed the title of the thread from “New Spark devices sti 7111 for amiko8900-PurE2-6.5 for test 29/10/2020” to “New Spark devices sti 7111 for amiko8900-PurE2-6.5 for test 1/11/2020”.
Spark STI 7111 Images
Download Enigma2 Images and Spark Firmware for ADOH R1, Amiko Alien SHD 8900, Amiko Alien Mini, Goldmaster HD 1200, Golden Media 990 CR HD PVR Spark LX, Golden Media Spark Reloaded, Edision Argus Pingulux, Edision Argus Pingulux Plus, Galaxy Innovations GI S, SAB Unix F+ Solo, Dynavision Spark, Dynavision Spark Plus, Fulan Spark I+, Truman Premier 1+, Samsat Linux 1, Startrack SRT 2020 HD, FullHD FH 2020 HD, Yumatu Spark, Visionnet Hammer, Visionnet Fireball, Superbox S750, Sogno Spark Revolution Spark STI 7111 Receivers.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!