oscam config files ?

**master G** · Feb 23rd 2020

Follow these steps:

Access the openwebif plugin by putting the ip address of the box into an internet browser.
Extras (left panel)
OSCam webinterface

Do you get access to this webinterface? If so OSCam is working and you don`t need to try a different version for now.

Its possibly a configuration issue, rather than OSCam itself.

Click the Files tab from the top. Then oscam.conf. Does it have the same details as in the configs i provided above? If not copy/paste/save them.

Now show us an example of how you have added this "line" to oscam.server (don`t post live server details, like passwords etc).

**s3n0** · Feb 23rd 2020

Radders58 :

All you need to do is back up your configuration files from the old Oscam, where everything worked !

You simply move these configuration files to a folder in your new installed Oscam, under another Enigma. How we can find out the path to the configuration files via OscamWebif, I've written to you before.

You don't need to install 10x new Enigma distributions to run Oscam ! Oscam must run correctly every time and everywhere ! It certainly must run in cases of all nearly identical Enigma2 that you are testing ! The differences are only in other chipset architectures such as SH_4 and AArch64. There are also differences when using different platforms such as Linux PC (x86 CPU) or WiFi router via an external reader, and other platforms. However, you always use the same Enigma - i.e. with the open source OE2.0 Enigma core. So, all your Enigmas are the same ! So, Oscam must always work the same everywhere, because the same Oscam compilation is used everywhere.

Besides, why do you need an EMU module ? This is more difficult to set up (Oscam has a module that emulates a physical card reader). If you don't need Oscam-Emu, use pure Oscam without EMU module instead.

OMG

Radders58 · Feb 23rd 2020

ok, could"nt access oscam webinterface

This is my oscam server file I use, it worked on open spa

[reader]

label = sky_irdeto_card

enable = 0

protocol = internal

device = /dev/sci0

key = 0102030405060708091011121314

caid = 1702,1833

detect = cd

group = 1

emmcache = 1,1,2

[reader]

label = sky_nagra_card

enable = 0

protocol = internal

device = /dev/sci0

key = 0102030405060708091011121314

caid = 1833

boxkey = A7642F57BC96D37C

rsakey = BA3894AD7659D65AB19272D34BD144CFDA4967F8A7C1BCCB633EE8C70557B89A6815741B3672E4BD60EED208A3DFF52BDD3A6D36383CDFF5E6FD254D9B834C79

detect = cd

group = 1

emmcache = 1,1,2

[reader]

label = sky_v13_card

enable = 0

protocol = internal

device = /dev/sci0

key = 0102030405060708091011121314

caid = 09C4

boxid = 12345678

detect = cd

group = 1

emmcache = 1,1,2

blockemm-unknown = 1

blockemm-s = 1

blockemm-g = 1

blockemm-u = 1

saveemm-u = 1

[reader]

label = sky_v14_card

enable = 0

protocol = internal

device = /dev/sci0

key = 0102030405060708091011121314

caid = 098C

boxid = 12345678

detect = cd

group = 1

emmcache = 1,1,2

blockemm-unknown = 1

blockemm-s = 1

blockemm-g = 1

blockemm-u = 1

saveemm-u = 1

[reader]

label = hdplus_card_white

enable = 0

protocol = internal

device = /dev/sci0

key = 0102030405060708091011121314

caid = 1830

boxkey = A7642F57BC96D37C

rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5

detect = cd

group = 1

emmcache = 1,1,2

[reader]

label = hdplus_card_black

enable = 0

protocol = internal

device = /dev/sci0

key = 0102030405060708091011121314

caid = 1843

boxkey = A7642F57BC96D37C

rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5

detect = cd

mhz = 368

cardmhz = 368

group = 1

emmcache = 1,1,2

[reader]

label = mtv_card

enable = 0

protocol = internal

device = /dev/sci0

key = 0102030405060708091011121314

caid = 0B00

detect = cd

group = 1

emmcache = 1,1,2

[reader]

label = hallotv_card

enable = 0

protocol = internal

device = /dev/sci0

key = 0102030405060708091011121314

caid = 0B02

detect = cd

group = 1

emmcache = 1,1,2

[reader]

label = viaccess_card

enable = 0

protocol = internal

device = /dev/sci0

key = 0102030405060708091011121314

caid = 0500

detect = cd

group = 1

emmcache = 1,1,2

[reader]

label = orf_card_cw

enable = 0

protocol = internal

device = /dev/sci0

key = 0102030405060708091011121314

caid = 0D05

detect = cd

group = 1

emmcache = 1,1,2

[reader]

label = orf_ice_card_cw

enable = 0

protocol = internal

device = /dev/sci0

key = 0102030405060708091011121314

caid = 0D95

detect = cd

group = 1

emmcache = 1,1,2

[reader]

label = orf_ice_card_irdeto

enable = 0

protocol = internal

device = /dev/sci0

key = 0102030405060708091011121314

caid = 0648

boxkey = 48454C4C4F4F5246

rsakey = 70FEA1692180154CD1C9777B2D7844927EE9B85D5EAF9FF0170B575E7BFE5D355FCBABFC6FE8667C281B853A03D12750270BB287C5756D9281F2CEF1D09AC219

force_irdeto = 1

detect = cd

cardmhz = 600

ident = 0648:000000

group = 1

emmcache = 1,1,2

[reader]

label = myconstantcw

enable = 0

protocol = constcw

device = /usr/keys/constant.cw

key = 0102030405060708091011121314

reconnecttimeout = 729867864

group = 5

[reader]

label = camd3_server

enable = 0

protocol = cs357x

device = blablabla.dyndns.org,20248

key = 0102030405060708091011121314

user = user

password = password

reconnecttimeout = 729867864

group = 4

[reader]

label = cccam_server

enable = 0

protocol = cccam

device = blablabla.dyndns.org,12000

key = 0102030405060708091011121314

user = user

password = password

inactivitytimeout = 1

reconnecttimeout = 729867864

group = 2

blockemm-unknown = 1

blockemm-u = 1

blockemm-s = 1

blockemm-g = 1

cccversion = 2.3.0

ccckeepalive = 1

[reader]

label = cable_uk

protocol = newcamd

device = 8+++++++++++++++++.org,32255

key = 0102030405060708091011121314

user = +++++++++++

password = ++++++++

group = 1

**master G** · Feb 23rd 2020

Quote from Radders58

ok, could"nt access oscam webinterface

Then OSCam isn`t running.

Go into the plugin download menu, softcams, then download OSCam from there. (menu > plugins > green button)

Reboot and try the webinterface again.

Keep the [reader] with label = cable_uk. You can safely remove all other readers from oscam.server.

The oscam configs on openpli image is usually /etc/tuxbox/config/oscam

I`ve attached a few other versions to try in case the image feed is down.

**Antepenultim8** · Feb 23rd 2020

enable = 0 ?

all of them are off

**master G** · Feb 23rd 2020

Quote from technodvl2

enable = 0 ?

all of them are off

I`m assuming they are all example readers that were already in the oscam.server file. The only one he is using is the [reader] with label = cable_uk.

**s3n0** · Feb 23rd 2020

Radders58 :

Probably not running Oscam service, as Mater G wrote it.

If you can use Shell or if you can connect to the set top box console (for example with PUTTY app), you can also use manual installation:

Code

### the script for detect and download the correct oscam binary file for your chipset architecture (file path = /usr/bin/oscam):
wget -q -O - --no-check-certificate "https://github.com/s3n0/e2scripts/raw/master/oscam-new-version-updater.sh" | bash

### download and install start-up "init.d" script file from my Github:
wget -O /etc/init.d/softcam --no-check-certificate https://github.com/s3n0/e2scripts/raw/master/softcam
chmod a+x /etc/init.d/softcam
update-rc.d softcam defaults 90

### Now, copy your Oscam configuration files into the folder "/etc/tuxbox/config/oscam/<your_cfg-files>" (using the FTP connection)

reboot     # to reboot your set-top box

Display More

For more information about the "/etc/init.d/softcam" shell script, you can read the contents of this script - at the beginning of it is brief information on how to install this "init.d" control script.

BTW ... in your oscam.server file cannot see a emulator card reader. So you need Oscam without EMU module (my script mentioned above, Oscam without EMU is downloaded as default Oscam - eventually you can change it by editing my script if you need OscamEmu instead of classic Oscam).

Radders58 · Feb 23rd 2020

ok master G, have downloaded the 2 files to try, I can access oscamwebif

Screen shot below

file:///home/Letmein/Desktop/Opera%20Snapshot_2020-02-23_183725_192.168.0.35.png

**Antepenultim8** · Feb 23rd 2020

as you have said it was working in OpenSPA

what oscam version

and the configs you used if sent to /etc/tuxbox/

should work too

i have just downloaded Openpli oscam from feed in plugins

and the it tells me files go into

/usr/bin/oscam --wait 0 --config-dir /etc/tuxbox/config/oscam

check you oscam script in /etc/init.d/

can you tell us what was working what were you able to view

as your server confg has caids that are no longer in use

i see you got it now

oscam config files ?

OSCam Support Forum

Participate now!

Share

Similar Threads

Trying to use Tivusat with Oscam on Zgemma 9H Combo

How to switch from Cccam to Oscam.

connected cards

AMIKO A4 and OSCAM files

Oscam blocking itself?

Tags