Advice for owners of the Spark box processor 7162 to take advantage of all images of the Spark devices 7111&7162
We all know that support for Spark 7111 is greater than support for Spark 7162 devices, and therefore you will find more images of Spark
7111 devices than available for Spark 7162 devices. So the only solution available for owners of Spark 7162 devices to benefit from this support is to work on external flash by plugin Nfr4X Multiboot of opennfr-5.3 Because The team open nfr has stopped supporting Spark devices since 30/5/2016 The latest version of the team for Spark 5.3 30/5/2016 and you must install the image on the Internal flash of device to work this plugin Because it is the only plugin that can install images of the 7111 processor on the boxes that holds the 7162 processor
and vice versabut disadvantage or problem in plugin Nfr4X Multiboot of opennfr-5.3. is it inability to make a Backup because it integrates all
the Partition and does not appear from it except the swap Partition This is because Partitions does not appear individually So it could not any plugin made backup to copy it
I have a Truman Top box spark7162 It is an old and poor device, but it is great in its performance I'm working On 2 number of external flash (This method was Created to solve this problem) Each flash is installed on it with a plugin or program different from the other to install with all known extensions such as Image extension zip, tar.Gz & all Image for spark Whether it is specific to the processor 7111 or 7162
Remember First you have to Divide your external flash with any program you like, and to which number you prefer a search that is one of the
Partition Swap fat 32 And the rest of Partition ext3 I divided the two flashes into 14 Partition For one flash by programs Admin_Tool_Morly and with that, I can install 13 imag per one flash
I am dedicated to the first flash to work with the plung Nfr4X Multiboot of opennfr-5.3
to Install versions for the 7111 processor
See this picture from my device for the first flash All copies installed on it plung to the processor 7111
The second external flash to work with the plung imagemanager & a program j00ztalator
to Install images for the 7162 processor
but you should know some of the following important information
Usually, we install the external flash panel by copying it to the internal flash of the device like our case, the version opennfr-5.3 was installed on the device and through it an external flash was made in the NFR4X multiboot But in this way, we will add and create a new external flash or say a second by copying his post to the first external flash,an external flash from an external flash
The plung NFR4X Multiboot works on the image opennfr and install copies with the extension img.zip compressed with the same extension, that is, you do not unzip the pressure from it install it compressed
The program j00ztalator works perfectly on all versions and infects copies with the tar.gz extension compressed with the same extension, that is, you do not unzip them, install them compressed
imagemanager works on most copies, infects copies with the img.zip extension, but after unzip it them, it will result in you after decompressing them with the folder called enigma2. Rename it as the version it is extracted from. It is recommended to do this to separate between copies, otherwise all copies will be called flash. The new foreign name is enigma2, and you have to rename it as the version also via it, because it is better to change the name so as to save time, rename the copy before installing it, otherwise you will have to do that after the installation.
To find out how to work on this plung, refer to my topic about it in the forum on this link
It should be noted that the device is called the first flash in the name of the sda and the second flash sdb so that no broadcast happens to you when dealing with each flash, it is recommended that the second flash be a brand and a different size than the first flash in order to ensure differentiation between them while dealing with them
To passing the copies installed on the first flash and installed by the famous NFR4X Multiboot for the image opennfr either from them or from the installed versions by means
of it. As for the copies installed on the other flash from the j00ztalator program or plung imagemanager, it is passing to copy them from the DuckBA-E2-plugin or plung imagemanager for any copies of the post on the flash
You must know and save a technique or the way to visit the front to return to the copies installed on the internal flash of the device because it is very important will save you from many problems and will use it a lot as you will see later and it is briefly as follows
- Lock the device from the back power button
- Remove the flash from the device, if the defect is in the new flash, remove it only, and if the defect is in the first flash, remove the two.
- Use the usual method to return to the spark from the front device buttons, but in our case we will return to the copy of the enigma2 that was installed on the internal flash of the device, which is the version opennfr Then delete the version with a problem and reinstall it if you like
When passing the opennfr version installed on the device, the second flash must be removed before entering it. Why because the copy sees the two flashes and messes them up between them and does not read the NFR4X Multiboot plugin the post on the first flash and asks where it can install the plugin again on any flash of the two even if it happened by mistake and entered it and when you entered To the plug-in you did not find a position on a simple flash. Restart the device. During the restart, remove the second flash. The copy will revert to reading NFR4X Multiboot. Each copy. This happens in this case only when entering the version installed on the internal flash. Outsourcing that it does not happen simply because they can not Albalijn inauguration but can only move between a copy because it is the focus of silent
Of courseYou can only work with one flash but have to install it by plugin Nfr4X Multiboot of opennfr-5.3 to take advantage of all images of the Spark devices 7111&7162 Or you can refer to a topic on the following link and implement what was stated in it
In conclusion, I hope that I have succeeded in displaying the information I have that may be sufficient for you to make the most of your device