NFR4XBoot-opennfr-6.4 & OPDBoot-opendroid-7.0c

**gorski** · Mar 3rd 2020

Quote

NFR4XBoot-opennfr-6.4
OPDBoot-opendroid-7.0

Use only one of the two Plugins as per your choice. The two equals

After unzip One of the two files that you choose to use
Plugins Folder Named NFR4XBoot or OPDBoot transfer by program dcc to following the path
usr /lib/ engima2 / python / Plugin / extensions
And transport the two file to the path / sbin

Then Exit & restart your receiver
After the reboot , you will find Plugin in the main menu and Plugin list

Remember First you have to Divide your external flash with any program you like, and to which number you prefer a search that is one of the Partition Swap fat 32 And the rest of Partition ext3

Display More

It's a bit of a nightmare, without any instructions, soooooo, let's kill our time a bit....:rasta2bigsmoke0gf1:

Alien2/STi7162

PurE2 (minimal installation, no FNC plugins, no channel list etc.) in the flash

As above: NFR4XBoot decompressed on my laptop and then use FileZilla Client to copy it...

-main folder goes to usr/lib/engima2/python/Plugin/extensions

-the other 2 small files go to /sbin

Preparation: you can partition a USB stick (I am using Toshiba 32GB) into 2 but both partitions ought to be EXT4. FAT32 (as suggested) is not recognised as valid format by the plugin.

I will use a smaller 2GB partition for the plugin and the other partition as /media/hdd.

But how does one do it? No instructions...

Let's try by similarity with OMB... let's see... images speak louder than words.... After reboot...

46a8b20.jpg

a993a1248.jpg

5684b770.jpg

efd898b02ca.jpg

f823d.jpg

bbc96e64fddbd85e6c3e0.jpg

86edaddd8b7223a3e4134.jpg

a69b0ea.jpg

fa5f1a7f18.jpg

9bf7ee3578ea1b.jpg

2acaef594c581a9f1.jpg

f03a4cfabd7ffb87.jpg

4ea9b7baed96a621a99.jpg

254218d.jpg 254218d.jpg

A word of warning - in Alien2/STi 7162 it does NOT work!!!

Good luck with your box...

**ahmed gazye** · Mar 4th 2020

My friend / gorski

There are many clear facts and one mistak in experience

First, the plugin was installed successfully on the copy without any crash of the installed version

Second, the plugin has been installed to the flash successfully if the plugin works in the copy, although it is not a copy of the team

Thirdly, when installing the new version by plugin, an error occurred with the plugin reading of the loaded version, and this appeared from the clear message from plugin, how is the boot for a copy not originally installed?

7b9936cfe6f1c9f2f.jpg

137871-2acaef594c581a9f1-jpg

This is an error that happens to me constantly even on the old team version 5.3 for my device

It is possible not to installing a copy from the first times, meaning that you repeat the process More than once

Fourth, when choosing this option as shown in the image

when correct installation of the copy Complete , the device will automatically restart

By doing a reboot to the new installed version

boot new image directly yes

137866-bbc96e64fddbd85e6c3e0-jpg

if not, we know that the loaded version was not installed

We delete the copy of the plugin and try again

by standing the copy name and pressing the yellow button on the remote

remove image

137870-9bf7ee3578ea1b-jpg

Finally, I am very happy with my humble box and praise be to God

Good luck

**gorski** · Mar 4th 2020

James Donkey HD Duo

PurE2 6.3 in flash.

After installation of the plugin to first partition, the box does boot, suggesting that it might work after all...

However, at the moment JD's drivers etc. leave a lot to be desired, so the mount manager loses the mounts and I must redo it, so I can start testing the plugin itself... But it just can't mount them properly...

So, I had to reinitialise the USB stick, 1 partition, Automount to ON, mounted as /hdd and only then it worked...

However, BSOD when I try to install an image from the authors of the plugin online...

It just does not work, it can not see even OpenATV image for it....

**ruspi** · Mar 4th 2020

Zao mi je ali ja ne govorim engleski kolega gorski moze prevesti

Openatv 6.4 dm 820 plugin instaliran uspjesno.medjutim image za dm 820 imaju extenziju tar.gz i program je ne vidi uopste.ako image stavim u zip pocne instalacija ali poslije par secundi dogodi se ovo kao na slici.

**gorski** · Mar 4th 2020

No can go, says Ruspi, as the image extension for DM820 is awkward... If he zips an image, it still isn't installed, sadly...

**ruspi** · Mar 4th 2020

online flash takodje ne ide.kada pokusam uci na neki od navedenih timova ili bude plavi/zeleni ekran ili nema nijedan image za skinuti

**gorski** · Mar 4th 2020

Online also faulty/non-functional with BSODs, no images to install...

**gorski** · Mar 5th 2020

Tried again in JD but not booting into the image I choose...

In this case OpenATV is installed in flash and PurE2 v. 6.3 in OPDBoot but can't boot into PurE2, whatever I do...

After I choose, the box reboots but not to what I choose, just goes back to OpenATV in flash...

angel_heart · Oct 17th 2020

dears .

i found this image included

NFR4XBoot-opennfr-6.4 plugin and worked without problem

i don't know how this plugin installed !!!!

openesi-8.6

http://www.mediafire.com/file/…oot-openesi%2529.zip/file

**ahmed gazye** · Oct 17th 2020

Quote from angel_heart

dears .

i found this image included
NFR4XBoot-opennfr-6.4 plugin and worked without problem
i don't know how this plugin installed !!!!

openesi-8.6

http://www.mediafire.com/file/…oot-openesi%2529.zip/file

Display More

look here

NFR4XBoot & OPDBoot MultiBoot Plugins can work on Most Modern images even if two teams not support our boxs

frank087234 · Oct 21st 2020

Quote from angel_heart

dears .

i found this image included
NFR4XBoot-opennfr-6.4 plugin and worked without problem
i don't know how this plugin installed !!!!

openesi-8.6

http://www.mediafire.com/file/…oot-openesi%2529.zip/file

Display More

what receiver this image for ?

**ahmed gazye** · Oct 21st 2020

Quote from frank087234

Quote from angel_heart

dears .

i found this image included
NFR4XBoot-opennfr-6.4 plugin and worked without problem
i don't know how this plugin installed !!!!

openesi-8.6

http://www.mediafire.com/file/…oot-openesi%2529.zip/file

Display More
what receiver this image for ?

Display More

spark Processor7162

frank087234 · May 24th 2021

Quote from ahmed gazye

Quote from frank087234

Quote from angel_heart

dears .

i found this image included
NFR4XBoot-opennfr-6.4 plugin and worked without problem
i don't know how this plugin installed !!!!

openesi-8.6

http://www.mediafire.com/file/…oot-openesi%2529.zip/file

Display More
what receiver this image for ?

Display More
spark Processor7162

Display More

this picture show FAILURE to install image >>please explain

https://www.linuxsat-support.c…88-7b9936cfe6f1c9f2f-jpg/

angel_heart · Oct 2nd 2021

Quote from frank087234

Quote from ahmed gazye

Quote from frank087234

Quote from angel_heart

dears .

i found this image included
NFR4XBoot-opennfr-6.4 plugin and worked without problem
i don't know how this plugin installed !!!!

openesi-8.6

http://www.mediafire.com/file/…oot-openesi%2529.zip/file

Display More
what receiver this image for ?

Display More
spark Processor7162

Display More
this picture show FAILURE to install image >>please explain
https://www.linuxsat-support.c…88-7b9936cfe6f1c9f2f-jpg/

Display More

dear frank

If your device 7162 try to install the attached files

it is working with me without any issues on OpenBH-4.4.000(i have backup will upload as topic ) + OpenLd-2.9 + Openesi-8.6

e44de4a056506.jpg

thanks

NFR4XBoot-opennfr-6.4 & OPDBoot-opendroid-7.0c

Participate now!

Share

Tags