ciefpsettings-enigma2 Abertis 30W Streamrelay

There are 565 replies in this Thread which was already clicked 154,268 times. The last Post () by iordanis70.

    Does the 8009 (Telemadrid...) line work for you? Oscam Live indicates this, but I get a black screen.

    • 2026/05/05 10:54:18 20329E3A r (emu) Key found: F 700989E2 00000000
    • 2026/05/05 10:54:18 10928AA1 c (ecm) dvbapi (2600@000000/0000/03F1/11:73252FF506CDFFCB4AD67A8F145C2B02): found (2 ms) by emulator (L/1/3/3) (lg)
    Quote from rubeneo

    Does the 8009 (Telemadrid...) line work for you? Oscam Live indicates this, but I get a black screen.

    • 2026/05/05 10:54:18 20329E3A r (emu) Key found: F 700989E2 00000000
    • 2026/05/05 10:54:18 10928AA1 c (ecm) dvbapi (2600@000000/0000/03F1/11:73252FF506CDFFCB4AD67A8F145C2B02): found (2 ms) by emulator (L/1/3/3) (lg)

    Is a New PID , no more 8009



    Now 8002 and keys are same old 8002

    Edited 2 times, last by gotera ().

    Like 1

    It's working again, thank you very much. And did the PID 8008 change too?

  • Post by gotera ().

    This post was deleted by master G ().

    I don't know how to see the kind of CW key

    • 2026/05/05 20:14:00 590F303A c (dvbapi) Demuxer 0 ecmpid 0 CAID: 2600 ECM_PID: 1FFF PROVID: 000000
    • 2026/05/05 20:14:00 590F303A c (dvbapi) Demuxer 0 found 1 ECM pids and 1 STREAM pids in CA PMT
    • 2026/05/05 20:14:00 590F303A c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 1390 VPID 0000
    • 2026/05/05 20:14:00 4BB24303 r (emu) Key found: F 50DEB036 00000000

    ciefp added a new version:

    File
    ciefpsettings-enigma2 Abertis 30W Streamrelay 06.05.2026
    :: CiefpSettings E2 ::
    :: Abertis.Dasto.KRRT ::
    ..:: 06.05.2026 ::..

    #ciefpsettingse2

    Update:
    astra.conf
    astra.conf - openpli

    Update
    Abertis PID 8002

    Update DTTCyprus
    11837 H MX1
    11855 H MX2

    Update plugins
    CiefpSettingsT2miAbertisOpenPLi 2.1
    CiefpSettingsT2miAbertis 2.5
    Update motor settings
    ciefp

    Whenever there is a new update for the channel and package files from your side, they stop working and must be manually modified again. I don’t understand why you don’t include the updates directly in the new files each time before uploading them. It’s becoming exhausting.

    Now, with the appearance of the new frequency, everything has completely stopped working. Neither the old frequency nor the new one is working anymore.

    I already wrote to you that I don't have a dreambox or other receivers.


    I have a vu + zero 4k and all my plugins and settings are tested exclusively on it and the openatv image. And I can claim that everything I set up works the same and is proven to work on the tested receiver and image.


    For other receivers and images, I have never claimed that it works one hundred percent. There are many versions of tuners, receiver images, countless combinations. I don't have a whole team behind me to do tests.

    Recently, changes have been happening very often regarding both abertis and dttcy, I also have my own other obligations and no one pays me to do this for someone,

    I do this as a hobby and when I have time.

    With the last settings everything is fine, you just need to install it properly and then everything will work.

    The procedure would be as follows:

    Open CiefpSetingsT2miAbertis, then press the YELLOW Update button. Upon receiver restart, reopen CiefpSetingsT2miAbertis and press the GREEN install. Once this is done, the program will offer you to download a new Channel List. At the next restart, you will have Abertis in the folder ##(Abertis DTT sat)##.

    Here, all channels will open with its softcam (if you have your own softcam, delete it). From its softcam, find the keys for 8008 , and then you can transfer these keys to your own softcam, and delete the existing softcam. In the softcam folder, you can only have one softcam.

    Ciefp, thank you very much for your effort.

    P.S.

    If some channels do not open, you need to enter different correct keys for your softcam! For example, for my softcam, I had to enter these keys F E0359ED2 00000000 DBCEC36CA05806FE ;ABERTIS 8002 (30.0W), F 03F00021 00000000 FE6566C9EB28697C ;ABERTIS 8008 (30.0W/12583), F 50DEB036 00000000 FE6566C9EB28697C ;ABERTIS 8008 (30.0W/12583) and the picture opens, and this one F 03201000 00000000 1111113311111133 ;MX (4.9E)

    abertis1.jpg

    abertis2.jpg

    Before you reply, understand the issue well.

    You need to realize that I’m not talking about the Spanish package.

    I’m talking about the T2MI Hellas Sat 4 package, which requires a different modification for Dreambox devices in order to work, unlike other receivers.

    I finally managed to find the solution, and the package worked at last after two full days of trying and exhaustion.

    After that, every incident will be discussed separately.

    Do you think the sigmatv can work on my vu+Solo2 that's not support multistream and the signal don't show up in my device

    Unfortunately, my dear, it's not possible.

  • Post by gotera ().

    This post was deleted by oktus ().

Your resource for essential Enigma2 configuration files

Find downloads and support for channel lists, receiver settings, and updated satellites.xml data. Find channel lists, settings, and satellites.xml files for Enigma2. Access downloads and support to manage your bouquets and satellite data.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login