alien2.u-boot.S25FL016A.bin
Advice when using U-boot in spark boxs
Of course Some understood the U-boot wrong
The U-boot is used if the device is completely dead and passed through the JTAG
Then the device takes off on the boot mode, and then it can be resurrected with soft-rescue a suitable one soft rescue 7111 or 7162 Depending on your processor
Most of the brothers whose devices stopped on boot They updated the U-boot this is a mistake
As long as the device appears on the screen of the device Boot meaning that the device originally does not lose the U-boot or boot loader it is the Valid
And the device does not lose the U-boot or boot loader without the result of damage to the flash or charging the flash with a different dump
Use at your own risk!
