b328f177cec2308.jpg

Truman_Spark7162_U-Boot & u-boot 131-11 for spark Truman sti 7111

Advice when using U-boot in spark boxs

Of course Some understood the U-boot wrong

The U-boot is used if the device is completely dead and passed through the JTAG

Then the device takes off on the boot mode, and then it can be resurrected with soft-rescue a suitable one soft rescue 7111 or 7162 Depending on your processor

Most of the brothers whose devices stopped on boot They updated the U-boot this is a mistake

As long as the device appears on the screen of the device Boot meaning that the device originally does not lose the U-boot or boot loader it is the Valid

And the device does not lose the U-boot or boot loader without the result of damage to the flash or charging the flash with a different dump

Use at your own risk!

Enjoy & Good luck

Quote from rkbs1999

Hello

Which JTAG hardware and software works with STi7111 ???

Regards

Display More

The U-boot is used if the device is completely dead and passed through the JTAG

In this case, the device is not responding to front buttons or flash cable

Jtag programmer UM-FT2232H

2bfe91d39590095d.jpg

it is recommended to be carried out by a technician who has the necessary equipment for this

U-Boot It must be based on the type of device

Enjoy & Good luck

Quote from rkbs1999

Hello Gazibaba

I used to JTAG many arm CPUs in past .

Here FT2232H is easily available in market .

Which software I should use for STi7111 JTAG ? Openocd will work ?? Seems like openocd has no support for sti7111.

Unfortunately no much information on google for sti7111.

Can you specify software name ?

Regards

Display More

What is the exact type of your device, yes it is a 7111 processor, but the type of device

Quote from ahmed gazye

Quote from rkbs1999

Hello Gazibaba

I used to JTAG many arm CPUs in past .

Here FT2232H is easily available in market .

Which software I should use for STi7111 JTAG ? Openocd will work ?? Seems like openocd has no support for sti7111.

Unfortunately no much information on google for sti7111.

Can you specify software name ?

Regards

Display More

What is the exact type of your device, yes it is a 7111 processor, but the type of device

Display More

There are many brands that carry the 7111 processor, see here

Thread

FULAN - Hardware : Spark STi 7111

FULAN - Hardware : Spark STi 7111

Hardware:Spark








Technische Spezifikationen dieser Baureihe:

• Main Processor: STi7111 @ 450MHz
• Nor flash: 1x 8MB
• Nand flash: 1x 512MB
• RAM: 2x 128MB DDR
• Bootloader mit Dual-Boot-Option für Spark (Fulan-Firmware) sowie Enigma2; siehe auch Spark:U-Boot
• Frontdisplay: beim Standardmodell: 4-stellig alphanumerisch, bei Plus-Modellen: VFD hochauflösend
• Tuner Type: 1x DVB-S2 SHARP BS2S7VZ7306A
• DiSEqC: 1.0, 1.1 1.2,

…

ahmed gazye

Apr 7th 2019

&

Hardware:Spark – TuxBoxWIKI

Quote from rkbs1999

hello Gazibaba

it is satellite provider original box . D.2.H CAID : 0.6.3.9.

Linux box are not easily available in my Country so i am thinking to do mod with this box and add your firmware in it .so i can enjoy liberty . :-)

Regards

Display More

The U-boot is used if the device is completely dead and passed through the JTAG

In this case, the device is not responding to front buttons or flash cable

Jtag programmer UM-FT2232H

This file contains the necessary files and instructions for that

& u-boot 131-11 for spark Truman sti 7111