hi all any one her can support in latest oscm mipsel with smargo and pcsc support. i tested the latest available oscam binary from admin has no support for smarog and pcsc reader..
cardreader_smargo: no
cardreader_pcsc: no
any one can help?
hi all any one her can support in latest oscm mipsel with smargo and pcsc support. i tested the latest available oscam binary from admin has no support for smarog and pcsc reader..
cardreader_smargo: no
cardreader_pcsc: no
any one can help?
Hi.
Which Enigma ? Which set-top-box model ?
For example, the latest Oscam version 11573 (mips32el) from the OpenPLi team (feed server 5. April 2020), contains smargo and smartreader modules (see the attachments), but not also the pcsc module .
However, the last Oscam is version 11578 (5. April 2020), but OpenPLi uploads new versions to the feed server only after testing. So the Oscam versions are there about a month behind, there's not exactly the latest Oscam version.
Thanks alot mate
can you let me know the procedure to compile latest version myself on my linux receiver
the files u sent me are for my zgemma receiver and are working fine read my smargo and all up.
let me know if you got the way to compile our self.
This is done on a Linux PC machine and not on Enigma2. Unfortunately, Enigma2 is a small and cropped version of Linux. If it could be done on Enigma2, it's more complicated than with a Linux PC.
For example, you need Debian Linux and you can try to compile Oscam for all sorts of platforms. The procedure for Linux PC x86 is simple but for other platforms it is a bit more complicated. You can find procedures on the Internet (Google search engine).
http://www.streamboard.tv/oscam/wiki/BuildingOscam
http://www.streamboard.tv/oscam/wiki/crosscompiling
http://www.satnigmo.com/2264/c…-with-simplebuild-script/ (old article)
Of course you need to have advanced knowledge of Linux systems. I do not compile Oscam for multiple platforms at all. So I can't advise you.
what config read external usb card reader
what config read external usb card reader
First you need to know what kind of external USB reader you have. Then you will find out if the support (module / library) for this reader is also compiled into your Oscam (eg phoenix, smartreader, ...) and then you will configure it.
| Settings:
| CONF_DIR = /etc/tuxbox/config
| CC_OPTS = -O2 -ggdb -pipe -ffunction-sections -fdata-sections
| CC_WARN = -W -Wall -Wshadow -Wredundant-decls -Wstrict-prototypes -Wold-style-definition
| CFLAGS = -fexpensive-optimizations -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 -DWITH_LIBUSB=1 -DWITH_PCSC=1 -I/HDD/OtHeR/BuIlDiNg/BuIlD/Toolchain/mipsel-vuplus/bin/../mipsel-vuplus-linux-gnu/sysroot/usr/include/PCSC -I/HDD/OtHeR/BuIlDiNg/BuIlD/Toolchain/mipsel-vuplus/bin/../mipsel-vuplus-linux-gnu/sysroot/usr/include/../local/include/PCSC -DWITH_UTF8=1 -DWITH_UTF8
| LDFLAGS = -Wl,--gc-sections -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 -DWITH_LIBUSB=1 -DWITH_PCSC=1 -I/HDD/OtHeR/BuIlDiNg/BuIlD/Toolchain/mipsel-vuplus/bin/../mipsel-vuplus-linux-gnu/sysroot/usr/include/PCSC -I/HDD/OtHeR/BuIlDiNg/BuIlD/Toolchain/mipsel-vuplus/bin/../mipsel-vuplus-linux-gnu/sysroot/usr/include/../local/include/PCSC -DWITH_UTF8=1 -DWITH_UTF8
| LIBS = -lssl -lcrypto -lusb-1.0 -lrt -lpcsclite -lm -lpthread -ldl
| UseFlags = USE_SSL=1 USE_LIBCRYPTO=1 USE_LIBUSB=1 USE_PCSC=1 USE_UTF8=1
| Config:
| Addons : WEBIF WEBIF_LIVELOG WEBIF_JQUERY WITH_SSL HAVE_DVBAPI READ_SDT_CHARSETS IRDETO_GUESSING CS_ANTICASC WITH_DEBUG MODULE_MONITOR WITH_LB CS_CACHEEX CW_CYCLE_CHECK WITH_EMU WITH_SOFTCAM
| Protocols: CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE GBOX SCAM CONSTCW
| Readers : NAGRA NAGRA_MERLIN IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD DRE TONGFANG BULCRYPT GRIFFIN DGCRYPT
| CardRdrs : PHOENIX INTERNAL SC8IN1 MP35 SMARGO STINGER SMART PCSC
| Compiler : mipsel-vuplus-linux-gnu-gcc (GCC) 9.3.0
| Config : build/mipsel-vuplus-linux-gnu-ssl-libusb-pcsc/config.mak
| Binary : Distribution/oscam-1.20_svn11583-CX-AIO-9.2.6-798-mipsel-vuplus-linux-gnu-ssl-libusb-pcsc
Display More
Hello! I have the same issue. I would like to use my PCSC reader, what is HID Omnikey 3121, with my Vu+Solo box.
As I see the quoted entry, if I follow this entry with telnet command on my VU+, I can add this PCSC reader option (driver or whatever) :) to my installed OSCam?
Thank You for answer.
CodeDisplay More| Settings: | CONF_DIR = /etc/tuxbox/config | CC_OPTS = -O2 -ggdb -pipe -ffunction-sections -fdata-sections | CC_WARN = -W -Wall -Wshadow -Wredundant-decls -Wstrict-prototypes -Wold-style-definition | CFLAGS = -fexpensive-optimizations -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 -DWITH_LIBUSB=1 -DWITH_PCSC=1 -I/HDD/OtHeR/BuIlDiNg/BuIlD/Toolchain/mipsel-vuplus/bin/../mipsel-vuplus-linux-gnu/sysroot/usr/include/PCSC -I/HDD/OtHeR/BuIlDiNg/BuIlD/Toolchain/mipsel-vuplus/bin/../mipsel-vuplus-linux-gnu/sysroot/usr/include/../local/include/PCSC -DWITH_UTF8=1 -DWITH_UTF8 | LDFLAGS = -Wl,--gc-sections -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 -DWITH_LIBUSB=1 -DWITH_PCSC=1 -I/HDD/OtHeR/BuIlDiNg/BuIlD/Toolchain/mipsel-vuplus/bin/../mipsel-vuplus-linux-gnu/sysroot/usr/include/PCSC -I/HDD/OtHeR/BuIlDiNg/BuIlD/Toolchain/mipsel-vuplus/bin/../mipsel-vuplus-linux-gnu/sysroot/usr/include/../local/include/PCSC -DWITH_UTF8=1 -DWITH_UTF8 | LIBS = -lssl -lcrypto -lusb-1.0 -lrt -lpcsclite -lm -lpthread -ldl | UseFlags = USE_SSL=1 USE_LIBCRYPTO=1 USE_LIBUSB=1 USE_PCSC=1 USE_UTF8=1 | Config: | Addons : WEBIF WEBIF_LIVELOG WEBIF_JQUERY WITH_SSL HAVE_DVBAPI READ_SDT_CHARSETS IRDETO_GUESSING CS_ANTICASC WITH_DEBUG MODULE_MONITOR WITH_LB CS_CACHEEX CW_CYCLE_CHECK WITH_EMU WITH_SOFTCAM | Protocols: CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE GBOX SCAM CONSTCW | Readers : NAGRA NAGRA_MERLIN IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD DRE TONGFANG BULCRYPT GRIFFIN DGCRYPT | CardRdrs : PHOENIX INTERNAL SC8IN1 MP35 SMARGO STINGER SMART PCSC | Compiler : mipsel-vuplus-linux-gnu-gcc (GCC) 9.3.0 | Config : build/mipsel-vuplus-linux-gnu-ssl-libusb-pcsc/config.mak | Binary : Distribution/oscam-1.20_svn11583-CX-AIO-9.2.6-798-mipsel-vuplus-linux-gnu-ssl-libusb-pcsc
First you need to know what kind of external USB reader you have. Then you will find out if the support (module / library) for this reader is also compiled into your Oscam (eg phoenix, smartreader, ...) and then you will configure it.
v103 working atr ok. but no entitelments
CodeDisplay More| Settings: | CONF_DIR = /etc/tuxbox/config | CC_OPTS = -O2 -ggdb -pipe -ffunction-sections -fdata-sections | CC_WARN = -W -Wall -Wshadow -Wredundant-decls -Wstrict-prototypes -Wold-style-definition | CFLAGS = -fexpensive-optimizations -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 -DWITH_LIBUSB=1 -DWITH_PCSC=1 -I/HDD/OtHeR/BuIlDiNg/BuIlD/Toolchain/mipsel-vuplus/bin/../mipsel-vuplus-linux-gnu/sysroot/usr/include/PCSC -I/HDD/OtHeR/BuIlDiNg/BuIlD/Toolchain/mipsel-vuplus/bin/../mipsel-vuplus-linux-gnu/sysroot/usr/include/../local/include/PCSC -DWITH_UTF8=1 -DWITH_UTF8 | LDFLAGS = -Wl,--gc-sections -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 -DWITH_LIBUSB=1 -DWITH_PCSC=1 -I/HDD/OtHeR/BuIlDiNg/BuIlD/Toolchain/mipsel-vuplus/bin/../mipsel-vuplus-linux-gnu/sysroot/usr/include/PCSC -I/HDD/OtHeR/BuIlDiNg/BuIlD/Toolchain/mipsel-vuplus/bin/../mipsel-vuplus-linux-gnu/sysroot/usr/include/../local/include/PCSC -DWITH_UTF8=1 -DWITH_UTF8 | LIBS = -lssl -lcrypto -lusb-1.0 -lrt -lpcsclite -lm -lpthread -ldl | UseFlags = USE_SSL=1 USE_LIBCRYPTO=1 USE_LIBUSB=1 USE_PCSC=1 USE_UTF8=1 | Config: | Addons : WEBIF WEBIF_LIVELOG WEBIF_JQUERY WITH_SSL HAVE_DVBAPI READ_SDT_CHARSETS IRDETO_GUESSING CS_ANTICASC WITH_DEBUG MODULE_MONITOR WITH_LB CS_CACHEEX CW_CYCLE_CHECK WITH_EMU WITH_SOFTCAM | Protocols: CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE GBOX SCAM CONSTCW | Readers : NAGRA NAGRA_MERLIN IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD DRE TONGFANG BULCRYPT GRIFFIN DGCRYPT | CardRdrs : PHOENIX INTERNAL SC8IN1 MP35 SMARGO STINGER SMART PCSC | Compiler : mipsel-vuplus-linux-gnu-gcc (GCC) 9.3.0 | Config : build/mipsel-vuplus-linux-gnu-ssl-libusb-pcsc/config.mak | Binary : Distribution/oscam-1.20_svn11583-CX-AIO-9.2.6-798-mipsel-vuplus-linux-gnu-ssl-libusb-pcsc
kindly share for arm box with config
error log
this my log
i have Dell RT7D60 PCSC smartcard reader keyboard. how can i configure it with oscam PCSC support and run my DTH card?
i have Dell RT7D60 PCSC smartcard reader keyboard. how can i configure it with oscam PCSC support and run my DTH card?
pm me
Hello dir friend i gor an orange viaccess but oscam can't read the card can anyone help me in this matter thanks
Hello dir friend i gor an orange viaccess but oscam can't read the card can anyone help me in this matter thanks
what errors your log
Don’t have an account yet? Register yourself now and be a part of our community!