So it's impossible, and you told me you might have found how. How do I split it by hand?
How replace splash screen on Zgemma h9twin
- pandox
- Thread is marked as Resolved.
-
-
Friend unpack in your computer and checked the files that are there
good job
regards
-
This image unpack?
And where to look? there are many folders.
-
Friend
all unpack and search
good job
regards
-
What name of the file who i look.? splash or jpeg or bmp .?
-
Friend the file and camouflaged by the house
you have to check all search
good job
regards
-
I find one image file with name "logo" but not open can you open you.?
This file in folder /h9combo/
I gave you the files early
-
Who help me pls.? Not want see this logo OPEN ATV how to replace.?
-
You shall modify logo.img file in the recovery emmc zip file (there is a jpeg file located 8192 bytes away from the start of the logo.img file)
dd if=logo.img of=logo.ini count=8192 ibs=1
dd if=logo.img of=logo.jpg skip=8192 ibs=1
cat logo.ini logo.jpg > logo.img
Good try & luck
-
master G
Moved the thread from forum Enigma2 Image Flashing and Setup Tutorials to forum Zgemma H9 series. -
Hi Pandox,
Did you succed? I have the same problem on Openatv 6.4 only, with this logo as it makes me pi...ed of. I attache which one.
Would appreciate your feedback as I don't know what beber ment by writting:
"You shall modify logo.img file in the recovery emmc zip file (there is a jpeg file located 8192 bytes away from the start of the logo.img file)"
Where this "recovery emmc zip file" can be found in 6.4 as this one makes me crazy?
-
Hi Pandox,
Did you succed? I have the same problem on Openatv 6.4 only, with this logo as it makes me pi...ed of. I attache which one.
Would appreciate your feedback as I don't know what beber ment by writting:
"You shall modify logo.img file in the recovery emmc zip file (there is a jpeg file located 8192 bytes away from the start of the logo.img file)"
Where this "recovery emmc zip file" can be found in 6.4 as this one makes me crazy?
I still don't know how to do this .. and i need help ..I don't know how and with what to open this logo.img and where to replace it ..
-
;( but, thanks for a feedback anyway ;)
-
I still don't know how to do this .. and i need help ..I don't know how and with what to open this logo.img and where to replace it ..
I don't know if you managed to resolve this but just flashing the latest ViX recovery.emmc from usb will replace the OpenATV splash screen with the Hisilicon one.
Just extract the recovery file to usb and power on the box whilst holding in the reset button on the back until FLSH appears on the display.
This seems to only update the recovery partition and splash screen and does not affect installed images.
I don't know how to flash a custom splash screen unfortunately.
-
I still don't know how to do this .. and i need help ..I don't know how and with what to open this logo.img and where to replace it ..
I don't know if you managed to resolve this but just flashing the latest ViX recovery.emmc from usb will replace the OpenATV splash screen with the Hisilicon one.
Just extract the recovery file to usb and power on the box whilst holding in the reset button on the back until FLSH appears on the display.
This seems to only update the recovery partition and splash screen and does not affect installed images.
I don't know how to flash a custom splash screen unfortunately.
Thank's Friend!! Can you help? When I change some channels, the sound starts from 0 and on other channels it is 100. Where there is a setting for all channels to be 100 ?I looked in all the settings but there is no such option. I want all channels to increase the volume to 100.
-
I still don't know how to do this .. and i need help ..I don't know how and with what to open this logo.img and where to replace it ..
I don't know if you managed to resolve this but just flashing the latest ViX recovery.emmc from usb will replace the OpenATV splash screen with the Hisilicon one.
Just extract the recovery file to usb and power on the box whilst holding in the reset button on the back until FLSH appears on the display.
This seems to only update the recovery partition and splash screen and does not affect installed images.
I don't know how to flash a custom splash screen unfortunately.
Thank's Friend!! Can you help? When I change some channels, the sound starts from 0 and on other channels it is 100. Where there is a setting for all channels to be 100 ?I looked in all the settings but there is no such option. I want all channels to increase the volume to 100.
goto plugins> systemplugins and install automaticvolumeadjustment
-
I have a question.
I have OpenATV 6.4.20210825 installed. Can I use recovery 20221013 to replace logo.img? I can't find 20210825 for Zgemma H9 TWIN.
In "recovery", I deleted everything from the "h9combo" folder (except the new logo.img). Will such recovery only replace logo.img, and the rest of the settings will remain unchanged? No need to modify e.g. bootargs.bin?
-
Who help me pls.? Not want see this logo OPEN ATV how to replace.?
send privately the image you want to post
Zgemma H9 Support Forum - Combo Tuner DVB-S2X DVB-C/T2 Linux Enigma2 Multi-stream QT Stalker WiFi Digital Receiver
Download Zgemma H9 Twin SE, Zgemma H9 Combo, Zgemma H9 Combo SE, Zgemma H9s and Zgemma H9s SE 4K UHD Series Images and Enigma2 Team Support from OpenATV, OpenBh, OpenDroid, OpenESi, OpenHDF, OpenPLi, OpenLD, OpenSPA, OpenViX, OpenVision, PKT Hyperion, PurE2, SatDreamGR, Sat-Lodge.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!