In which file can I find the Update URL for Free Servers ?
The Cccam.cfg is empty for me
ncam.fs
^^^^^^^^^***********^^^^^^^^^^^
Updated config Files from 26.02.2021
you can download it from the First Post
Thanks fairbird
In which file can I find the Update URL for Free Servers ?
The Cccam.cfg is empty for me
ncam.fs
^^^^^^^^^***********^^^^^^^^^^^
Updated config Files from 26.02.2021
you can download it from the First Post
Thanks fairbird
Yes you can download it from First post (Amiko A5 (7.0_Nougat))
IT'S NOT AN APK FILE
HOW CAN I SETUP IT
Sorry .. I can not help you ... I'm just build ncam bin files not apk ..
You can ask in Android devices sections
Ncam in this device is not apk file it's a bin file just build it by toolchian with android api 24 (api24>>7.0_nougat) and config directory /data/...
Hey Guys.
If I understand correctly, you put the paid cline in cccam.cfg and free cline in ncam.fs is this correct? And than after reboot it should work..I'll use the suggested config files from post #277 ..
Thanks for your work fairbird!
yes ... Exactly
Display MoreHey Guys.
If I understand correctly, you put the paid cline in cccam.cfg and free cline in ncam.fs is this correct? And than after reboot it should work..I'll use the suggested config files from post #277 ..
Thanks for your work fairbird!
yes ... Exactly
Unfortunaly this one froze on me as wel. Is there someting I can do about it?
In livelog it keeps saying:
2021-03-04 19:52:01 0E769690 r (emu) Key not found: I 60400 08
2021-03-04 19:52:01 0E769690 r (emu) ECM failed: Key not found
Thanks in advance!
What channels you are trying to open it ?!
Is it broken encrypted change works with softcam.key ?!!
Or chanel working with C: line servers ?!!
Make it more clearer please !!!
Display MoreDisplay MoreHey Guys.
If I understand correctly, you put the paid cline in cccam.cfg and free cline in ncam.fs is this correct? And than after reboot it should work..I'll use the suggested config files from post #277 ..
Thanks for your work fairbird!
yes ... Exactly
Unfortunaly this one froze on me as wel. Is there someting I can do about it?
In livelog it keeps saying:
2021-03-04 19:52:01 0E769690 r (emu) Key not found: I 60400 08
2021-03-04 19:52:01 0E769690 r (emu) ECM failed: Key not found
Thanks in advance!
You should reject this CAID from SOFTCAM READER
What channels you are trying to open it ?!
Is it broken encrypted change works with softcam.key ?!!
Or chanel working with C: line servers ?!!
Make it more clearer please !!!
Dutch channels from ziggo. Get signal via cable en unlock keys via C: line server. With cccam 2.3.2 works fine..
I know its CAID 0604 PROVID 000000, should I just delete all the other one's?
Thanks!
Display MoreDisplay MoreDisplay MoreHey Guys.
If I understand correctly, you put the paid cline in cccam.cfg and free cline in ncam.fs is this correct? And than after reboot it should work..I'll use the suggested config files from post #277 ..
Thanks for your work fairbird!
yes ... Exactly
Unfortunaly this one froze on me as wel. Is there someting I can do about it?
In livelog it keeps saying:
2021-03-04 19:52:01 0E769690 r (emu) Key not found: I 60400 08
2021-03-04 19:52:01 0E769690 r (emu) ECM failed: Key not found
Thanks in advance!
You should reject this CAID from SOFTCAM READER
I'll try thanks!
Display MoreWhat channels you are trying to open it ?!
Is it broken encrypted change works with softcam.key ?!!
Or chanel working with C: line servers ?!!
Make it more clearer please !!!
Dutch channels from ziggo. Get signal via cable en unlock keys via C: line server. With cccam 2.3.2 works fine..
I know its CAID 0604 PROVID 000000, should I just delete all the other one's?
Thanks!
CCcam can not open new broken encrypted channels as well as Ncam/Oscam and just depend on C: line
As your log show the ncam try to open it depend on softcam.key not C: line ...
So as Roronoa advice try to change or reject this CAID from softcam.key
Display MoreDisplay MoreWhat channels you are trying to open it ?!
Is it broken encrypted change works with softcam.key ?!!
Or chanel working with C: line servers ?!!
Make it more clearer please !!!
Dutch channels from ziggo. Get signal via cable en unlock keys via C: line server. With cccam 2.3.2 works fine..
I know its CAID 0604 PROVID 000000, should I just delete all the other one's?
Thanks!
CCcam can not open new broken encrypted channels as well as Ncam/Oscam and just depend on C: line
As your log show the ncam try to open it depend on softcam.key not C: line ...
So as Roronoa advice try to change or reject this CAID from softcam.key
I’ll give it a try!
Display MoreDisplay MoreDisplay MoreHey Guys.
If I understand correctly, you put the paid cline in cccam.cfg and free cline in ncam.fs is this correct? And than after reboot it should work..I'll use the suggested config files from post #277 ..
Thanks for your work fairbird!
yes ... Exactly
Unfortunaly this one froze on me as wel. Is there someting I can do about it?
In livelog it keeps saying:
2021-03-04 19:52:01 0E769690 r (emu) Key not found: I 60400 08
2021-03-04 19:52:01 0E769690 r (emu) ECM failed: Key not found
Thanks in advance!
You should reject this CAID from SOFTCAM READER
It's still failing on me.
This is what I did.
1. Downloaded the ipk from first post en installed it
2. Added Cline to cccam.cfg
3. Deleted all readers from ncam.servers except for the softcam part
VU+ duo 4k se
VTI15
Cline server 2.0.11
Signal by cable unlock codes bij cline.
Attached log working state and down state. After reboot starting to work again.
If I remove al caids from readers and only use 0604, I still get error massage key not found, I 60400 08.ECM failed.
What to do....:cringe:
No nobody? Could it be image related? Should I give PLi a go?
Here your wrong option ...
Correct is like this
do not use dot "." characters
label = Internet_SoftCam.key # bug
label = Internet_SoftCam_key # ok
It is my fault in my config files I was updated it already ... Try to use newest files not oldes
[reader]
label = Device_SoftCam
protocol = emu
device = emulator
#device = /etc/tuxbox/config/SoftCam.key (if you want to set your personal path)
#/storage/.kodi/userdata/addon_data/service.softcam.ncam/config/SoftCam.Key (change with your system location)
caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE
group = 6
emmcache = 2,2,2,0
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE
[reader]
label = Internet_SoftCam
protocol = emu
#device = https://raw.githubusercontent.com/fairbird/MyImagesFeeds/master/SoftCam-Files/SoftCam.Key
device = https://raw.githubusercontent.com/MOHAMED19OS/SoftCam_Emu/main/Enigma2/SoftCam.Key
caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE
group = 6
emmcache = 2,2,2,0
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE
Display More
values, how should it be?
cccam_cfg_path = / etc
cccam_cfg_repetitions_forced = 1
cccam_cfg_reconnect_delay = 115
cccam_cfg_reconnect_attempts = 12
[dvbapi]
enabled = 1
au = 1
pmt_mode = 6 # [Use 6 the Best value for (opensource) images only]
delayer = 103
request_mode = 1
ecminfo_type = 4
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
my box does not recognize
etkin = 1
geciktirici = 103
can you explain in plain english
I'm trying to keep it from freezing
but what is
etkin = 1
geciktirici = 103
enable = 1 ( i assume )
and
??????? ( have no idea )
nor does my box
thank you
for editing in english
thank you, goodnight 🙋♂️
Display MoreHere your wrong option ...
Correct is like this
do not use dot "." characters
label = Internet_SoftCam.key # bug
label = Internet_SoftCam_key # ok
It is my fault in my config files I was updated it already ... Try to use newest files not oldes
CodeDisplay More[reader] label = Device_SoftCam protocol = emu device = emulator #device = /etc/tuxbox/config/SoftCam.key (if you want to set your personal path) #/storage/.kodi/userdata/addon_data/service.softcam.ncam/config/SoftCam.Key (change with your system location) caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1 detect = cd ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE group = 6 emmcache = 2,2,2,0 emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE [reader] label = Internet_SoftCam protocol = emu #device = https://raw.githubusercontent.com/fairbird/MyImagesFeeds/master/SoftCam-Files/SoftCam.Key device = https://raw.githubusercontent.com/MOHAMED19OS/SoftCam_Emu/main/Enigma2/SoftCam.Key caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1 detect = cd ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE group = 6 emmcache = 2,2,2,0 emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE
Thanks fairbird, I'll give it a try!
Display MoreDisplay MoreWhat channels you are trying to open it ?!
Is it broken encrypted change works with softcam.key ?!!
Or chanel working with C: line servers ?!!
Make it more clearer please !!!
Dutch channels from ziggo. Get signal via cable en unlock keys via C: line server. With cccam 2.3.2 works fine..
I know its CAID 0604 PROVID 000000, should I just delete all the other one's?
Thanks!
CCcam can not open new broken encrypted channels as well as Ncam/Oscam and just depend on C: line
As your log show the ncam try to open it depend on softcam.key not C: line ...
So as Roronoa advice try to change or reject this CAID from softcam.key
In a previous post, you suggested to reject a specific caid. Could you explain to me how I can do this?
Don’t have an account yet? Register yourself now and be a part of our community!