excellent article, just a detail...
not all the 8x1 diseq switces do this job
the 8x1 DiSEqC switch must support only uncomitted commands, and not combined uncomitted + commited commands (or support selection from dip switch).
for example the one below (which is my personal, created by emp and renamed/sold by another company) can't work in combination with other switches
Hello can any one help us make this happen in enigma2 ( has been tested on other receivers )
how to set on other receivers
Is the theoretical maximum 32 or 64?
What does the new Diseqc 3 add to the table?
16 (1.1) x 4 (1.0) = 64 LNB
16 (1.1) x 4 (1.0) = 64 LNB
and if we add tone burst A/B do we get 128?
it may be possible to have 128 if you add a tone burst switch A/B as the screenshot says "command order DISEQC 1.0 DISEQC 1.1 toneburst"
so (1x tone-burst 2ports- 2x DISEQC 1.1 16ports - 16x DISEQC 1.0 4 ports) or the other way around
(DISEQC 1.0 4 ports - 4x DISEQC 1.1 16ports - 64x toneburst 2ports)
also I think 4x sats multiswitches can be used in place of DISEQC 1.0, each STB will use a DISEQC 1.1 to connect to up to 16 4x sats multiswitch ports (64 Sats)
