Connecting 8 Satellites on one tuner

Hello

this might be a newbie question but I own a Vu+ solo 4K and I am wondering what is the setup to use connecting 8 satellites via Diseqc in one tuner. The settings are quiet confusing for this part. I am using open BH image.

Would appreciate a step by step and simple explanation please,

Thanks

Hi... Thanks for the reply..

It's 1.1

few questions here..

Satellite = Hotbird 13E (Change satellite name here)*

Why satellite is hotbird ? If it's 8 connected so why Hotbird is written in specific ? if 8 are connected what's the reference of the satellite to be written here ?

I don't have to change these two lines if 8 satellites are connected ... right ?

LNB = LNB 8 (Change LNBs 1-8)*

Uncommitted DiSEqC command = Input 8 *

Thanks

Quote from masterasy

Hi

You must give the number of the DiSEqC written on your switch 8 in 1.

It's DiSEqC 1.0DiSEqC 1.1 or DiSEqC 1.2 ...

So we can help you.

For exemple with ref DiSEqc 1.1 I have this configuration for enigma 2

Configuration Mode = advanced

Satellite = Hotbird 13E (Change satellite name here)*

Voltage mode = Polarization

Tone mode = Band

LNB = LNB 8 (Change LNBs 1-8)*

DiSEqC mode = 1.1

Toneburst = None

Committed DiSEqC command = none

Fast DiSEqC = no

Sequence repeat = Yes

Command order = uncommitted, committed, toneburst

Uncommitted DiSEqC command = Input 8 *

(Change LNB input here 1-8)

DiSEqC repeats = none

LOF = Universal LNB

Increased voltage = yes (for long cables)

Polarity = Auto

Tone Amplitude = 800mV

*change this only

Display More

I did it.. Thanks very much for the explanation... all great now.