rambo something strange nfi image and flash boot
QuoteDisplay More
Hi!
After Oldboke has guessed the name for the successor of Cramy, I must keep my promise and start a new thread for Rambo - like Dumbo stands for Dumb boat rambo tool is available for RAM boot tool - actually very obvious :-)
After being loaded with rambo, the nfi files directly into the RAM and the flash is used for the delta has to stop at the cost of RAM, loads of space in the flash. By booting from RAM to the box is also slightly faster at boot and seems to me more agile, which depends of course on the amount of free RAM and the size of the nfi files. Therefore it is of course no magic formula, but I had fun just find out here if it works.
Actually, I've built but for the 7020HD as it were 'too much' you can use RAM that has elegance in this way for added performance - a 2.0 OE boot image as example place in 80 seconds to the TV picture in 63sec and the handling of enigma2 is a bit more agile than it already is on the 7020JD. Flashing is a simplem nfi file in the Select dFlash and reboot, etc.
I'm already at the last test, if all goes well, I post you in the course of the evening the first rambo kit.
But this is really just a first test kit and even more for OE 2.0. He will work for only a few weeks and have still only the temporary boot logo without the Rambo Tux.
Since Rambo has no separate plugin / he will also be needed only by very spartan dFlash 4.7 usable, then I must also post.
. To install simply install first dFlash 4.7, the kernel-rambo * ipk to / tmp FTPen and enter telnet:
opkg update
opkg install / tmp / kernel-rambo *. ipk
And how to use it?
Simply put in the settings dFlash in the Flash tool to rambo, when (s) then select an image is in dFlash to flash this on / media / hdd and copied from there on the next boot booted into RAM. If an image does not like 'flashes' to stop another and so on. The nfi which one 'flashes' may be a normal OE 2.0 Image of Thank you for your interest in Dreambox Update, but also the security of your fully-equipped flash image.
When you first boot, the flash image 'rambofiziert' say it is / equipped boat with rambo (this is his jungle into which he withdraws when do you change the image because it is here that made root completely empty) and the root area cleared of Flash and only used for more than Delta nfi. The image always dFlash moves automatically with the new rambo, rambo, as well as the need to install not so new. With dFlash can also save the image rambo normal and flash back to normal as get the delta to small again if you install too much and has updated the nfi is moved to the flash.
And do not complain about the boot logo, which is only a temporary measure, it is quite a lot better at work. But do not try to change the boot logo, then Rambo is working, and You must not repair a broken.
Rambo goes fastest when the nfi images are loaded from the SATA hard drive, but also works a USB stick (but then a nature, which is about 5-7 seconds of the second Botzeitverbesserung around 15-17 on the needs to lose again). However, the stick in the flash image as a hard disk replacement will be at / media / hdd mount.
So let's first find out together if my tinkering is ever good for something :-)
Have fun with Rambo, but the first is only a test kit is only about 3 weeks.
LG
gutemine
