Update: 08/07/2020
dreambox-dvb-modules: initial add hardware drivers for dreamtwo
Update: 08/07/2020
dreambox-dvb-modules: initial add hardware drivers for dreamtwo
Update:10/07/2020
Update:10/07/2020
dreambox-dvb-modules:
fixed wronly reported aspect ratio for H264 content (fixes wrongly formatted video screenshots)
Update:18/08/2020
dreambox-dvb-modules: update dreamone and dreamtwo hw drivers - added missing clear for first lines on top of the dreamtwo display - fixed eof detection for H264 video playback |
Update:18/09/2020
dreambox-dvb-modules: update dreamtwo drivers (reworked fpga init)
- reworked frontpanel LED API, removed old api, added led_color, led_brightness, led_blink and led_fade settings (needs new enigma2)
- reworked FPGA init (dreamtwo)
- changes needed for newer FP soft
Update: 26/10/2020
dreambox-dvb-modules: update dreamone/dreamtwo hardware drivers - fixed possible broken field order on 1080i H264 content (since 20200624r0 drivers) |
Update:30/10/2020
dreambox-dvb-modules: update dreamone/dreamtwo hardware drivers
- fixed broken video on some middle east HEVC services (broken since 20201026 drivers)
dreambox-dvb-modules: update dreamone and dreamtwo hardware drivers - pcr/vcxo fixes - small video decoder speedup - si2183 more accurate sleep times / diseqc timings |
Update:17/03/2021
dreambox-dvb-modules: update dreamone/dreamtwo hw drivers
- fixed H264 issues (e.g. for services of Scandinavia "Telenor/CanalDigital")
- fixed possible PCR/SCR issues
Update:18.05.2021
• dreambox-dvb-modules: update dreamtwo hardware drivers
• fixed TS problems for high bitrate transponders
• fixed audio buffer underflows on rare services (needs new enigma2)
• add changes needed for audio sync plugin (needs new enigma2)
• optimized video eof detection
• lower demux latency
i am problem,
How to format and clean Dreambox Two and upload new software or image to it?
Because it stopped working for me. He turns it on, but then stands on the newnigma2.to dreambox board and stands on this
I'm connected to it using Total Commander, I can see the files. I can also connect to DCC.
After turning it on and holding the power button for a longer time, it is not possible to obtain the IP and upload it via dreambox update, nothing, only the message "dreambox start recovery? 1" appears on the display? 1, dreambox START RECOVERY? GO and the orange light on it is on.
When I run it normally without holding this button, it stays on the board I wrote and stays as I wrote earlier, then I only connect to it with Total Commander and I see the files.
A new tuner bought on Amazon and such hits.
Previously, it was running Dreambox OS with newnigma2 2023-06-22, but some green windows errors started appearing, it started restarting all the time and now it doesn't run at all. I ask what to do with it and how?
I am asking for help urgently
Don't you remember the IP of the box?
I remember, but it doesn't show the IP on my display. I connect DCC, Total Commander to it and now how can I somehow upload a new image to it and format it?
I am FlashWizardPRO, conenct, what plik .nfi, .img, , nw2, .nwz . .jbk upload flash image backup? please help me? Please links good plik.
FlashWizardPRO where is not .tar.xz file. backup. How, what instal DM Two plik. tar.xz?
Whn you go in "START RECOVERY? GO" you have to search the dhcp IP.
You can do this with utility like "nestat" or "nmap" it depends on what OS you use.
then you can flash wathever you want.
It mast be related to your box (of course).
IP 192.168.1.4 to blue leds tryb works, this standing board. Then, they combine works DCC, Flash Wizard, Dreambox Edit, Dreambox Set i.t.p
Combne orange( reds) leds works "START RECOVERY? GO" not IP. Then, they combine not works DCC, Flash Wizard, Dreambox Edit, Dreambox Set i.t.p
Could you help, skype,gg, TeamViewer_Setup_de?
As i said when you are in "START RECOVERY? GO" Your IP become an DHCP IP.
So you have to find your dhcp ip . Once you got it you can flsh everything.
In linux i use nmap in order to find dhcp Ip
In windows i don't know what to use.
ok works orange leds, thanks http://192.168.1.3/upload.dhtml
whats install openatv 7.3? I am downloads, and invalid instal file type
ok, works rootfs-two.tar
GO!, instal.
Firmware upload
cilck here reboot
i have openatv 7.3., works ok.
not oscam,ncam feeds, works?
and moduł ci helper? i am search
Don't use OpenATV with Dreambox One/Two. It's not optimized for Dreambox.
I recommend only dreamOS images - AIO image is the best, in my opinion.
You can choose/install 2.6 images too: PeterPan, NewEnigma2, Merlin, Satlodge, Dream-elite.
Regards
Download DreamTwo Dreambox Two 4K UHD Android CoreELEC, DreamOS Firmware and Enigma2 Images. Team Support from DemoniSat - Dream-Elite - Gemini Project GP4 - Merlin Project - NewNigma2 - Peter Pan Neverland - OpenBh - OpenPLi Japhar - OpenATV - OpenVision - PurE2 - SatLodge.
Don’t have an account yet? Register yourself now and be a part of our community!