DM900 cannot be flashed anymore ...

There are 13 replies in this Thread which was already clicked 2,647 times. The last Post () by jerome2013.

    Hello Friends,


    I have a dm900, after been gone for 2 weeks i turned on the receiver but the oled screen was totally white

    I did a reboot and it won't boot ... so i did rescue mode and it really took a while to show an ip adress.


    When i try to flash a new image it gives errors like '' error 5 cannot create partition table etc.. etc.. ''


    Any help..?

  • master G

    Added the Label Image Flashing & Backup Support

    Hello again , i tryed dreamUP the com3 port becomes available with mini usb and lan connect but i don't get any ip adress anymore....

    I will try tomorrow with mini usb only connected any tips..? i did use dreamUP with the dm500 long time ago through serial connection.....


    Any help will be really be appreciated

    Взаимодействие с другими людьми

    Quote from jerome2013

    Not working with the commands trough putty ssh, error 5 i cannot flash it again ... i think the internal flash has died or something dammit...

    follow the link register on the Domica forum, if you don't know Russian well, use an online translator ...here everything is described in detail how to restore dreambox900-920, good luck!!!



    Code
    http://www.domica.biz/index.php?topic=15938.0


    if you can't find a solution there either then look for information - Through the service port, you can restore using the TFTP server running on the computer.

    hi dear friend will TFTP help me i have this error in my dm900


    CPU 01

    Dreambox DM900

    AVS init...

    AVS init OK

    AVS load:select_image: addr_offset: 00051000 part_offset: 00000000 bootStatus: 2 a002b00

    AVS load_code offset =00051000

    LOADED

    AVS: overtemp mon ON

    single board

    select_image: addr_offset: 00055000 part_offset: 00000000 bootStatus: 3d2b2500

    MEMSYS-STD

    SHMOO 02010000 BLD:11138M HW:hpf0_b1p6 V:2.1.0.0

    MCB: FLEX

    AVS start:status=000000ff

    STB: Current voltage=0000038c(908)

    temperature=0000b2c4(45764)

    PV=0000034e(846)

    MV=0000038d(909)

    AVS FW rev=30333278 [0.3.2.x]

    OK

    DDR0: !@ ffe0e780 <= ffe0df10 MEMSYS-0 @ f1100000 OK

    DDR1: =@ ffe0e780 <= ffe0df10 MEMSYS-1 @ f1180000

    MEMSYS ERROR: 00000001

    eMEMC:

    00000000

    ePHY: 00000000

    eSHMOO: 10000000 00000082 00000000

    CPU 01

    Dreambox DM900

    AVS init...

    AVS init OK

    AVS load:select_image: addr_offset: 00051000 part_offset: 00000000 bootStatus: 2 a2f2b00

    AVS load_code offset =00051000

    LOADED

    AVS: overtemp mon ON

    single board

    MEMSYS:0000002f

    FATAL ERROR: Boot 2nd image failed

    Fatal: Target device '/dev/mmcblk0p2' is not writable


    When trying to flash any image available .....


    I think it's a memory problem, online recovery doesn't work latest rescue images /bootloader


    Telnet works i still won't give up

  • master G

    Closed the thread.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login