Zgemma and HH engine

There is 1 reply in this Thread which was already clicked 418 times. The last Post () by Linesman.

    Hello,

    I have a Zgemma Star 2s that I paired with my HH engine, I have the Openpli 7.3 image, it doesn't work, while with my Vu + and also the Openpli image it works.

    Wouldn't the Zgemma be powerful enough to move the engine?

    Thank you for your help.

    Many problems in the past with

    With zgemma h2 series and h9 series

    With power problems with h.h motors

    With my h2s I had to change my power

    Adaptor to the brick type 12volt 5amp

    Output and used a low powered L.n.b

    This has been covered In the fourm

    Before

    This was my tunner configuration


    Zgemma H1 + Alsat Dark Motor with no LNB connected.

    Tuner configuration Menu.

    Configuration Mode = Simple

    Mode = Position

    Longitude = 001.362 West (yours will be different)

    Latitude = 052.710 North (yours will be different)

    Extra Motor Options = NO

    (Green to Save and Exit – Should now show as Positioner : USALS

    Manual Scan Menu.

    Tuner = Tuner A : BCM7346 (internal) (DVB-S2)

    Type of scan = User defined transponder

    System = DVB-S

    Satellite = 19.2E Astra

    Frequency = 11836

    Inversion = Auto

    Symbol rate = 27500

    Polaration = Horizatal

    ( Press Scan and hopefully the Motor will kick in and move to 19.2E – even not having a LNB connected this works for me).

    I think the problem lies with the Zgemma internal memory settings matching up with whats programmed into the Motor settings

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login