Oscam config for Astra 19.2 and Hot 13

Hello to everyone,

At the start i just had the the hispa 30w working and every thing was ok, but my budy who sends me my lines told me that i could had a second dish to catch astra and hot to.

The thing is, german, hispanis, polac channels work just perfect, the thing is that i can't open has it should the french and belgian channels.

Tried multiple configs but at the end i have multiple freezes and some times the oscam can't open at all...

I'm using two dishes with 3 lnb's quattro and a multiswitch to manage the all, and for the box i have a Vu+ zero 4k with the blackhole soft and oscam_11.669-emu-r798 installed and i'm receiving the info over 2 cccam lines converted in oscam.

These are the errors that i keep having:

2020/11/05 12:17:20 xxxxxxxxx c (ecm) xxx (P: 0500:030B00:245D:03D9:131A: #ECM_L:168 #CW=00000000000000000000000000000000 HOP:01): not found (1 ms) by 00.000.000.000 (F/2/2/2) - FRANCE 3

2020/11/05 12:17:21 xxxxxxxxx c (dvbapi) Demuxer 0 restarting decoding requests after 1 ms with 1 enabled and 7 disabled ecmpids!

2020/11/05 12:17:21 xxxxxxxxx c (dvbapi) Demuxer 0 trying to descramble PID 7 CAID 0500 PROVID 030B00 ECMPID 03D9 ANY CHID PMTPID 0384 VPID 038E

2020/11/05 12:17:21 xxxxxxxxx c (ecm) xxx (P: 0500:030B00:245D:03D9:131A: #ECM_L:168 #CW=00000000000000000000000000000000 HOP:01): not found (0 ms) by 00.000.000.000 (F/2/2/2) - FRANCE 3

2020/11/05 12:17:21 xxxxxxxxx >> OSCam << cardserver log switched, version 1.20_svn, build r11669-798 (armv7-vuduo4k-linux-gnueabihf)

2020/11/05 12:17:22 xxxxxxxxx c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 7 disabled ecmpids!

2020/11/05 12:17:22 xxxxxxxxx c (dvbapi) Demuxer 0 trying to descramble PID 7 CAID 0500 PROVID 030B00 ECMPID 03D9 ANY CHID PMTPID 0384 VPID 038E

2020/11/05 12:17:22 xxxxxxxxx c (ecm) xxx (P: 0500:030B00:245D:03D9:131A: #ECM_L:168 #CW=00000000000000000000000000000000 HOP:01): not found (1 ms) by 00.000.000.000 (F/2/2/2) - FRANCE 3

2020/11/05 12:17:23 xxxxxxxxx c (dvbapi) Demuxer 0 restarting decoding requests after 1 ms with 1 enabled and 7 disabled ecmpids!

2020/11/05 12:17:23 xxxxxxxxx c (dvbapi) Demuxer 0 trying to descramble PID 7 CAID 0500 PROVID 030B00 ECMPID 03D9 ANY CHID PMTPID 0384 VPID 038E

2020/11/05 12:17:25 xxxxxxxxx c (ecm) xxx (P: 0500:030B00:245D:03D9:131A: #ECM_L:168 #CW=2785D9BD2DD4C425E9BE3CE8EE888E7E HOP:01): found (1157 ms) by 00.000.000.000 (P/2/2/2) - FRANCE 3

2020/11/05 12:17:34 xxxxxxxxx c (ecm) xxx (P: 0500:030B00:245D:03D9:131A: #ECM_L:168 #CW=2785D9BD2DD4C4256D4D509263D29858 HOP:01): found (1575 ms) by 00.000.000.000 (P/2/2/2

I masked the user and ip's just for protection

If someone could maybe tell me what i'm doing wrong i would appreciate it very much.

Thanks

Thanks for your help. I already tested with these files but it makes the same efect.

I tested with multiple configs but it ends always with the french freezing or not opening. The dvbapi is the file that i can't get right to have everything rolling. The only file that i had to remove was the services because it was bugging the mediasat channels. I removed the softcam to because i dont need and erased the emu from server because i dont need aswell.

Depending on what i insert on the disablecws only for, that is on the conf global, it can open for moments de french but in the same way it can slow the german non sky.

I even tried without the dvbapi file but some packages from astra or hot will stop too...

I think that i have the right configs to keep the 3 sats rolling but the details are missing, because the 30w is fine, the sky d, german generic, polacs, hispanish ans italian generic are just perfect, its only the french and belgian that it can't get right.