My receiver is crashing. The problem obviously comes from oscam.
After I let only 3-4 lines work, the problem disappeared. The question is, are there any settings. Or clearing the cache. Because I haven't had this problem before.
My receiver is crashing. The problem obviously comes from oscam.
After I let only 3-4 lines work, the problem disappeared. The question is, are there any settings. Or clearing the cache. Because I haven't had this problem before.
We don`t know how you have the lines / readers configured, or which values are enabled.
Look at the Live log in the webinterface or save the log to a file then look for errors.
Oscam.config
[global]
logfile = /dev/tty
clienttimeout = 4000
clientmaxidle = 300
netprio = 1
nice = -1
maxlogsize = 1000
waitforcards = 1
preferlocalcards = 2
dropdups = 1
block_same_ip = 0
block_same_name = 0
ecmfmt = P: c:0p:s:d:i #ECM_L:l #CW=w HOP:j
disablecrccws_only_for = 098C:000000;09C4:000000;0E00:000000;0500:030B00,050F00;1884:000000;0B00:000000;1830:000000;092F:000000;0963:000000
[streamrelay]
stream_relay_enabled = 0
[dvbapi]
enabled = 1
au = 1
pmt_mode = 6
request_mode = 1
delayer = 60
user = dvbapi
read_sdt = 1
extended_cw_api = 2
[cccam]
port = ******
version = 2.3.0
build = 3165
[monitor]
appendchaninfo = 1
[newcamd]
port = ххххх@4AEE:000000
key = 0102030405060708091011121314
Oscam.server
[reader]
label = blala
protocol = cccam
device = xxxxxx,11222
user = xxx
password = xxxx
inactivitytimeout = 90
reconnecttimeout = 60
group = 1
cccversion = 2.1.2
cccmaxhops = 1
ccckeepalive = 1
cccreconnect = 11000
audisabled = 1
[reader]
label = we
protocol = newcamd
device = ip,1019
key = 0102030405060708091011121314
user = xxxxxx
password = xxxxx
inactivitytimeout = -1
disableserverfilter = 1
connectoninit = 1
cacheex_maxhop = 1
group = 1
Oscam.user
[account]
user = xxxx
pwd = xxxx
caid = 4AEE
group = 1
Use these configs:
linuxsat-support.com/filebase/file/583/A basic reader configuration is the best place to start testing from.
Hi.
As for "freezing" ... how does it manifest itself ? Will the Oscam freeze process run in your set-top box? Or is there simply a problem that is also visible in Oscam Webif -> LiveLog ? Which Enigma are you using ?
Do not share an external connection to an external card until you are sure that Oscam is working properly. For now, delete the [global], [cccam] and [newcamd]. Then disable AU feature in [dvbapi] sections from the oscam.conf file. You really don't need AU feature if you don't have your own local card and you also have the AU feature disabled in the oscam.server file. AU is used to write EMMs to a card (AutoUpdate). This is mainly used for local cards, and rarely for external cards. So if you have disabled the AU feature (EMMs card write) in the oscam.server file, then also disable / do not use it in the oscam.conf file either.
QuoteDisplay More"oscam.config":
[global]
[dvbapi]
enabled = 1
au = 0
user = dvbapi_user
[webif]
httpport = 8888
httprefresh = 8
httppollrefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255
"oscam.server":
[reader]
label = blala
protocol = cccam
device = xxxxxx,11222
user = xxx
password = xxxx
group = 1
audisabled = 1
[reader]
label = we
protocol = newcamd
device = ip,1019
key = 0102030405060708091011121314
user = xxxxxx
password = xxxxx
group = 1
"oscam.user":
[account]
user = dvbapi_user
pwd =
group = 1
au = 0
i hvae my real local card
georgim :
I do not see any configured connection to the local reader (local card) in the "oscam.server" file. Do you mean a USB reader or a built-in UNI reader in a set-top box ? Which Enigma do you have ? Which satellite/terrestrial provider or what CAID is it ? The configuration also depends on what encoding you use.
Or do you also have your softcam server and need to connect to it ? In that case ... is the configured softcam server (such as Oscam) correct?
[reader]
label = bulsat
protocol = internal
device = /dev/sci0
caid = 4AEE
boxid = 12345678
detect = cd
mhz = 450
cardmhz = 2700
ident = 4AEE:000000
group = 2
emmcache = 1,1,2,0
[account]
user = dvbapi
pwd = dvbapi
keepalive = 1
au = 1
group = 1,2,3,4,5,6,7,8,9,10
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
user = Receiver
read_sdt = 2
boxtype = dreambox
There is one small mistake ...
user = Receiver
You have the wrong dvbapi user name ... you have to use the name you also set in dvbapi in the oscam.conf file. So like this:
user = dvbapi
Also delete the "keepalive" and "pwd" configuration items from the dvbapi account as it is unnecessary.
CAID 4AEE is a Bulgarian satellite provider. I found in the discussion thread Bulsat card and receiver - Can i share it ??? that there are V1 and V2 satellite cards. According to this discussion, only the older V1 will work in Oscam. I don't know for sure, because I don't have a Bulgarian satellite card :).
You can still add priority to CAID 4AEE to the "oscam.dvbapi" file (but that's probably unnecessary in your case):
P: 4AEE
After changing the version of Oscam, things got better, but until a few days ago.
Now my receiver started to load again.
I notice that when the load average holds values up to 1.5-2.5 it works stably. When it raises above 4.5 per minute and the receiver crashes.
Don’t have an account yet? Register yourself now and be a part of our community!