My receiver is crashing. The problem obviously comes from oscam.
After I let only 3-4 lines work, the problem disappeared. The question is, are there any settings. Or clearing the cache. Because I haven't had this problem before.
Oscam crashing dm800 hd
- georgimv
- Thread is marked as Resolved.
-
We don`t know how you have the lines / readers configured, or which values are enabled.
Look at the Live log in the webinterface or save the log to a file then look for errors.
-
Use these configs:
linuxsat-support.com/filebase/file/583/A basic reader configuration is the best place to start testing from.
Code[reader] label = blala protocol = cccam device = xxxxxx,11222 user = xxx group = 1Code[reader] label = we protocol = newcamd device = ip,1019 key = 0102030405060708091011121314 user = xxxxxx password = xxxxx group = 1 -
Hi.
As for "freezing" ... how does it manifest itself ? Will the Oscam freeze process run in your set-top box? Or is there simply a problem that is also visible in Oscam Webif -> LiveLog ? Which Enigma are you using ?
Do not share an external connection to an external card until you are sure that Oscam is working properly. For now, delete the [global], [cccam] and [newcamd]. Then disable AU feature in [dvbapi] sections from the oscam.conf file. You really don't need AU feature if you don't have your own local card and you also have the AU feature disabled in the oscam.server file. AU is used to write EMMs to a card (AutoUpdate). This is mainly used for local cards, and rarely for external cards. So if you have disabled the AU feature (EMMs card write) in the oscam.server file, then also disable / do not use it in the oscam.conf file either.
QuoteDisplay More"oscam.config":
[global]
[dvbapi]
enabled = 1
au = 0
user = dvbapi_user
[webif]
httpport = 8888
httprefresh = 8
httppollrefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255
"oscam.server":
[reader]
label = blala
protocol = cccam
device = xxxxxx,11222
user = xxx
password = xxxx
group = 1
audisabled = 1
[reader]
label = we
protocol = newcamd
device = ip,1019
key = 0102030405060708091011121314
user = xxxxxx
password = xxxxx
group = 1
"oscam.user":
[account]
user = dvbapi_user
pwd =
group = 1
au = 0
-
georgim :
I do not see any configured connection to the local reader (local card) in the "oscam.server" file. Do you mean a USB reader or a built-in UNI reader in a set-top box ? Which Enigma do you have ? Which satellite/terrestrial provider or what CAID is it ? The configuration also depends on what encoding you use.
Or do you also have your softcam server and need to connect to it ? In that case ... is the configured softcam server (such as Oscam) correct?
-
There is one small mistake ...
user = Receiver
You have the wrong dvbapi user name ... you have to use the name you also set in dvbapi in the oscam.conf file. So like this:
user = dvbapi
Also delete the "keepalive" and "pwd" configuration items from the dvbapi account as it is unnecessary.
CAID 4AEE is a Bulgarian satellite provider. I found in the discussion thread Bulsat card and receiver - Can i share it ??? that there are V1 and V2 satellite cards. According to this discussion, only the older V1 will work in Oscam. I don't know for sure, because I don't have a Bulgarian satellite card :).
You can still add priority to CAID 4AEE to the "oscam.dvbapi" file (but that's probably unnecessary in your case):
P: 4AEE
OSCam Support Forum
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
