HELP!! - 80cm Dish Multi LNB Setup with 4 LNB's

There are 2 replies in this Thread which was already clicked 554 times. The last Post () by abu baniaz.

    Hi Guys (and girls)


    I have a 80cm Technomate Satellite dish with a Triax Inverto MultiBlock Multi LNB Holder (holds 4 LNB's)


    Ideally i would like to receive the following satellites through my satellite dish :- 9e, 13e, 19e, 28.2e


    Would the best thing be to position the satellite dish to one of the middle satellites say 13e and work my way out from there?


    Could someone also give me some guidance with the proper way to setup one of these multiple LNB holders would be greatly appreciated, one bit that is confusing me is how to make all the LNBs have the correct elevation etc.


    I know its a fiddly job but would love to get it setup :)


    I am located in East London (E4) to be precise which no doubt will be one of the factors in assisting :)


    Thank you

    • Official Post

    I don't think those brackets have the focal LNB in the center. I would say that have the dish so that it is in between 13e and 19e. That way you have two LNBs on either side.


    Once the dish is aligned for one satellite, the bracket should allow the rest of them to follow the arc. You don't have it horizontal, but an angle. Have a look at pictures of other setups to see what I mean.


    PS. Not too far from you.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login