look here this may help.
Thanks. I'LL try to find partition address
So we can transform 9twin to novalar completely?
look here this may help.
Thanks. I'LL try to find partition address
So we can transform 9twin to novalar completely?
frankviana said there was no rs232 for h9twin i was just pointing him to section showing cable to connect to pins inside machine.
I would say you are supposed to edit android image to suit machine not edit machine to suit different android image. Thats why I posted XDA Developer forum link.
They may have editor for the android file I know I got one there for Amlogic S912 rom files for my T95Z Plus android box and Amlogic usb Image burning tool.
Here is example of the one for my android box I did try to unpack the novaler-android-multibox image but it failed would not unpack level 2
any good news?
I tried only "system", but no sucess to boot android...
LOG HERE:
We need a way to write only android partition, but I don't know why. I tried only "system" partition, because may to damage all systems.
Here 2 folders ".xml" for andoid boxes.
Log for uart partition:
When try to load android:
Fastboot 3.3.0 (h9combo@builder) (Jul 24 2019 - 23:00:41)
Fastboot: Version 3.3.0
Build Date: Jul 24 2019, 23:03:26
CPU: Hi3798Mv200
Boot Media: eMMC
DDR Size: 1GB
Found flash memory controller hifmc100.
no found nand device.
MMC/SD controller initialization.
scan edges:3 p2f:5 f2p:8
mix set temp-phase 2
scan elemnts: startp:132 endp:111
Tuning SampleClock. mix set phase:[03/07] ele:[02/17]
MMC/SD Card:
MID: 0x15
Read Block: 512 Bytes
Write Block: 512 Bytes
Chip Size: 7456M Bytes (High Capacity)
Name: "8GTF4R"
Chip Type: MMC
Version: 5.1
Speed: 100000000Hz
Mode: HS400
Voltage: 1.8V
Bus Width: 8bit
Boot Addr: 0 Bytes
*******************************
serial:
mac:
*******************************
Net: eth0 phymdio(31) invalid, use default:0
upWarning: failed to set MAC address
, downWarning: failed to set MAC address
, gmac0Warning: failed to set MAC address
Boot Env on eMMC
Env Offset: 0x00100000
Env Size: 0x00010000
Env Range: 0x00010000
SDK Version: h9combo
Reserve Memory
Start Addr: 0x3A8FE000
Bound Addr: 0x8EA9000
Free Addr: 0x391F7000
Alloc Block: Addr Size
0x3A4FD000 0x400000
0x3A1FC000 0x300000
0x3A1F9000 0x2000
0x3A178000 0x80000
0x39B88000 0x5EF000
0x3939E000 0x7E9000
0x3939A000 0x3000
0x39204000 0x195000
0x391FA000 0x9000
0x391F7000 0x2000
reading STARTUP_ONCE
0 bytes read
Total of 1 byte were the same
Total of 1 byte were the same
reading STARTUP
189 bytes read
byte at 0x01000000 (0x62) != byte at 0x04000000 (0x00)
Total of 0 bytes were the same
Press Ctrl+C to stop autoboot
MMC read: dev # 0, block # 196608, count 16384 ... 16384 blocks read: OK
176053727 Bytes/s
Check Hisilicon_ADVCA ...
Not hisilicon ADVCA image ...
Check Hisilicon_ADVCA ...
Not hisilicon ADVCA image ...
Wrong Image Format for bootm command
ERROR: can't get kernel image!
MMC read: dev # 0, block # 155648, count 40960 ... 40960 blocks read: OK
176251008 Bytes/s
Check Hisilicon_ADVCA ...
Not hisilicon ADVCA image ...
Check Hisilicon_ADVCA ...
Not hisilicon ADVCA image ...
Wrong Image Format for bootm command
ERROR: can't get kernel image!
Display More
Now, trying to get kernel from recovery again to boot other multiboot images:
MMC read: dev # 0, block # 4096, count 36864 ... 36864 blocks read: OK
176049348 Bytes/s
Check Hisilicon_ADVCA ...
Not hisilicon ADVCA image ...
Check Hisilicon_ADVCA ...
Not hisilicon ADVCA image ...
## Booting kernel from Legacy Image at 01000000 ...
Image Name: Linux-4.4.35
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 15766387 Bytes = 15 MiB
Load Address: 02000000
Entry Point: 02000000
Loading Kernel Image from 0x16777280 to 0x33554432 ... OK
OK
ATAGS [0x00000100 - 0x000004E4], 996Bytes
Starting kernel ...
Display More
After send only kernel, appear display Andr, but restarting... I need send kernel again.
Wow!!!!
Sucess to install andoid on my Zgemma h9 twin, but rebooting after appear first screen (same first video Unsuccessful try to install android on zgemmah9twin).
Here the video:
https://www.mediafire.com/file…_20210317_130350.mp4/file
:)
New video:
https://www.mediafire.com/file…/200920086438_03.mp4/file
*OpenATV don't reboot to recovery (stop and need replace recovery again);
*When start to Android too, need replace recovery again.
We need a way to contact xda develpers to install other android images.
Here a log when starting Android:
well done my friend it is a great step
I hope some one who know that to help us so soon
sadly I do not know anything in this field.
Display MoreNew video:
https://www.mediafire.com/file…/200920086438_03.mp4/file
*OpenATV don't reboot to recovery (stop and need replace recovery again);
*When start to Android too, need replace recovery again.
We need a way to contact xda develpers to install other android images.
Here a log when starting Android:
well done you are making good progress you can go to xda-developers and register.
Mouse working...
https://www.mediafire.com/file…/200920086920_02.mp4/file
...but we need a way to do factory reset or install other android
Display MoreDisplay MoreNew video:
https://www.mediafire.com/file…/200920086438_03.mp4/file
*OpenATV don't reboot to recovery (stop and need replace recovery again);
*When start to Android too, need replace recovery again.
We need a way to contact xda develpers to install other android images.
Here a log when starting Android:
well done you are making good progress you can go to xda-developers and register.
I have account past more years, but some people don't answer... and... I don't have good english.
I think the problem is "skin", but I don't know how to change. This problem appear too when change my apk file for other HiScilicon dvb device.
Mouse working...
https://www.mediafire.com/file…/200920086920_02.mp4/file
...but we need a way to do factory reset or install other android
you should try gofile for your uploads no restrictions :)
This is art my friend
Thank you for your hard work
I believe in you and I know you will make it.
Now, new video using other image, then, wifi working...
:)
But need some (a lot of) steps to back to recovery enigma2...
I need to sleep.
Here, 02:19 AM
:)
Don’t have an account yet? Register yourself now and be a part of our community!