NC+ seca

There are 26 replies in this Thread which was already clicked 4,948 times. The last Post () by Peruncomp.

    I have a NC+ card I believe commonly called Cameleon


    I understand that from April 14 NC+ did something to stop these cards working in ECP Cam modules. Unfortunately it appears to have affected me.


    I am using a Zgemma H& or a VU+ Zero both with OSCam r11572 and my oscam.server is as attached.


    Is there any update or modification I can do to get the card working again



    Quote

    To continue using the CAM ECP, you must insert the original Cayman or Crocodile card that was included in the kit. Cameleon cards on CAM ECP modules will no longer be supported.


    Let us add that the CANAL + Platform released software in December that prevents the use of Cameleon cards in CAM ECP modules. However, some people cleverly avoided updating to continue watching the programming offer. Now it will not be possible anymore - gradually all channels will be blocked, starting from the CANAL + antennas.

    bez wody nie ma życia, więc trzymam się blisko niej

    I am not using a CAM ECP. I have not even the slightest idea what it is. All I know is my card stopped on 14 April as well.


    As I stated above I am using a Zgemma H& or a VU+ Zero both with OSCam r11572.


    I want to get it working with OSCAM again

    The card worked perfectly well and updated without a problem until 13 April. I have never heard of the cak7 but what I have managed to google this appears to be more for Conax than seca. I also am not sure what you mean by no have keyset no party.

    Quote from naszdom

    I am not using a CAM ECP. I have not even the slightest idea what it is. All I know is my card stopped on 14 April as well.


    As I stated above I am using a Zgemma H& or a VU+ Zero both with OSCam r11572.


    I want to get it working with OSCAM again

    Your reader?


    [reader]

    Label = cyfra

    Protocol = internal

    Detect = cd

    Device = /dev/sci0

    EMMCache = 1,3,2

    Group = 1

    mhz = 500

    cardmhz = 500

    CAID = 0100

    ident = 0100:000068

    ecmwhitelist = 0100@000068:64,67

    emmcache = 1,1,0



    Caid 0100 cyfra + ?


    Whats this got to do with NC+ Poland

    @naszdom

    Oscam reader Cyfra+,nC+,PC+.CAID seca 0100 to CAID nagra 1813

    oscam serwer


    oscam.dvbapi

    P: 1813:000068

    ===========================

    English translation of "configuring oscam 1813 vu+" by detomis.

    oscam conf


    [global]

    disablelog = 1

    logfile = /var/emm/

    usrfileflag = 1

    clienttimeout = 7000

    nice = -1

    waitforcards = 0

    preferlocalcards = 1

    lb_nbest_readers = 2

    lb_max_ecmcount = 50

    lb_stat_cleanup = 1

    disablecrccws = 1

    disablecrccws_only_for = 1884:000000



    [dvbapi]

    enabled = 1

    au = 1

    pmt_mode = 1

    delayer = 150

    ecminfo_file = 0

    user = dvbapi

    read_sdt = 2

    write_sdt_prov = 1

    boxtype = dreambox


    [webif]

    httpport = 8888

    httpuser =

    httppwd =

    httprefresh = 10

    httphideidleclients = 3

    httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

    hideclient_to = 15

    Edited 2 times, last by Neoukneo: oscam conf ().

    Thanks for the config files Tomek. I can follow them.


    As I understand it. I need to replace Oscam. In the instructions it says go to sat-4-all and choose the newest one on the bottom. Well that might have been the case when it was written, but you are now spoilt for choice and I have no way of knowing which is the right one. (Zgemma H7 Vix image). The instructions seem to show Oscem-cycec 11584. There are a lot of Oscem-cycec files there, but they have moved on from 11584.


    Alternatively I think you suggest using OSCam smod ( git+2188+db58dbb,Trunk r11581). I can find that at Github, but it consists of 15 folders and about 100 additional single files. I would not know where to begin. There is possibly something similar here Oscam Smod 11581, but I still would not know which one.


    If ever I do fathom out the adapted oscam there then is the matter of NUID & CWPK. I have seen references to a "park" at sat-4-all s I think I can get hold of NUID & CWPK there. Is it then simply a matter of entering the details on the oscam.server?


    Why is watching television legally so difficult but watching it illegally so easy?


    This is interesting

    https://allegro.pl/oferta/enig…3bc806f55bd0c404f69ac7020

    Edited once, last by naszdom: Add information ().

    Thanks but I am not certain which one. Zgemma H7 is an armv 7 receiver. There are two which mention arm but not v 7. In each of the two there are 2 files. I have tried doing it with the method shown in the instructions but I cannot get any of the 4 to work. I don't know whether I have got the wrong files, I should have telneted them or whther I need to change my image from vix.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login